CoChat

Thermal Performance Enhancement of Triplex Tube Latent Thermal Storage Using Fins-Nano-Phase Change Material Technique

The DOI matches its Crossref record; 23 of the 23 references it cites were found in a registry or an index.

Abstract

Latent heat thermal energy storage (LHTES) systems using a phase change material (PCM) can reduce the heat-transfer rates during charging/discharging processes because of their inherently low thermal conductivity. In this study, heat-transfer enhancement using various configurations of longitudinal fins employing both a PCM and a nano-PCM in a large triplex-tube heat exchanger (TTHX) was numerically investigated via the Fluent 15 software. The results showed that the thermal conductivity of the pure PCM (0.2 W/m K) can be observably enhanced by dispersing 10% alumina (Al2O3) to 25%. Therefore, the melting time is reduced to 12%, 11%, and 17% for the internal, internal-external, and external fins, respectively, compared with the case of the PCM without nanoparticle. It is concluded that the model of external fins-nano-PCM embedded in a large TTHX is the most efficient model for achieving complete PCM melting in a short time (188 min), where improving the thermal performance to 14% and 11% compared with the TTHX with internal and internal-external fins-nano-PCM, respectively. The simulation results are validated and agree well with experimental results for the PCM and nano-PCM.

Overview

Integrity signals

Registry

Crossref · 10.1080/01457632.2017.1358488

Cites

23 of 23 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Verification

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Citations

Cites

Research works printed but not linked: 3

  1. Niyas H., International Journal of Scientific and Engineering Research, 4, 2229
  2. Zeng J. L., Journal of Thermal Analysis and Calorimetry, 87, 369
  3. Pincemin S., ASME Journal of Solar Energy Engineering, 130, 1

Cited by

See all 58

Metadata

Authors
Abdulateef, A. M., Mat, S., Abdulateef, J., Sopian, K., & Al-Abidi, A. A.
Affiliations
  • University of Diyala (IQ)
  • National University of Malaysia (MY)
  • Sana'a Community College (YE)
Corresponding author
Abdulateef, Ammar M.
Venue
Heat Transfer Engineering
Published
2017-09-13
Volume
39
Issue
12
Pages
1067-1080
ISSN
  • 0145-7632 (ISSN-L)
  • 1521-0537
OpenAlex
W2737072617
Cited by
57
References
23
Citations by year
2026: 3 · 2025: 7 · 2024: 7 · 2023: 7 · 2022: 8 · 2021: 10 · 2020: 6 · 2019: 5 · 2018: 4
FWCI
3.19
Type
journal article
Language
en
Open access
closed
Locations
Heat Transfer Engineering (publishedVersion)
Topics
  • Physical Sciences › Engineering › Mechanical Engineering › Phase Change Materials Research
  • Physical Sciences › Engineering › Mechanical Engineering › Adsorption and Cooling Systems
  • Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Solar Thermal and Photovoltaic Systems
Keywords
latent heat storage, phase change materials, nanofluids, Al2O3 nanoparticles, triplex tube heat exchanger, longitudinal fins, heat transfer enhancement, thermal conductivity, PCM melting, nanoparticle concentration

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.