The DOI matches its Crossref record; 53 of the 53 references it cites were found in a registry or an index; 3 of the 10 sources its claims cite were checked for support.
A critical assessment of nanoparticles enhanced phase change materials (NePCMs) for latent heat energy storage applications
Open accessAbstract
Phase change material (PCM) laden with nanoparticles has been testified as a notable contender to increase the effectiveness of latent heat thermal energy storage (TES) units during charging and discharging modes. In this study, a numerical model is developed and implemented based on the coupling between an advanced two-phase model for the nanoparticles-enhanced PCM (NePCM) and the enthalpy-porosity formulation for the transient behavior of the phase change. Therefore, a porosity source term is added to the nanoparticles transport equation to account for the particles' frozen state in regions occupied by solid PCM. This two-phase model includes three main nanoparticles' slip mechanisms: Brownian diffusion, thermophoresis diffusion, and sedimentation. A two-dimensional model of a triplex tube heat exchanger is considered and different charging and discharging configurations are analyzed. Compared to pure PCM, results show a substantial heat transfer enhancement during the charging and discharging cycle in which a homogeneous distribution of nanoparticles is considered as the initial condition. For this case, the two-phase model predictions are superior to the ones obtained with the classical single-phase model. In the case of multi-cycle charging and discharging, a significant deterioration of the heat transfer rate is observed using the two-phase model while such assessment is senseless using the single-phase mixture model due to the physical assumptions upon which this model is formulated. The two-phase model results reveal that, for a NePCM with high nanoparticles concentration (> 1%), the melting performance during the second charging cycle is reduced by 50% compared to the first one. This performance degradation is attributed to a noteworthy non-homogeneous distribution of the nanoparticles at the beginning of the second charging cycle. The dominant nanoparticles migration mechanism, in this scenario, is the one resulting from sedimentation effects.
Overview
CoChat Summary
## TL;DR
This paper argues that single-phase nanoparticle-enhanced PCM models are inadequate for multi-cycle latent heat storage because they assume a uniform nanoparticle distribution and miss migration effects. Using a two-phase model coupled with enthalpy-porosity, the authors show that nanoparticles can improve melting/solidification in the first cycle but performance can deteriorate by about 50% by the second charging cycle in a 10% NePCM case.
## Key findings
- For a 10% NePCM in a triplex tube heat exchanger, the two-phase model predicted a fully melted condition earlier than pure PCM in the first charging process, and the paper reports a 50% degradation in NePCM performance by the third charging process relative to the first.
- In the multi-cycle case, the second charging performance of the NePCM was reported to be reduced by about 50% compared with the first charging, while still being about 20% better than pure PCM.
- The degradation is attributed to non-homogeneous nanoparticle distribution caused by sedimentation, Brownian diffusion, and thermophoresis; the paper identifies sedimentation as the dominant mechanism in the high-concentration case (> 1%).
- For the 0% nanoparticle case, both single-phase and two-phase models gave the same predictions, while for the 10% case the two-phase model was reported to be more accurate than the single-phase model.
## Methods
- The study uses a numerical two-phase model for NePCM, coupled with the enthalpy-porosity method for phase change, and compares it against a single-phase mixture model.
- Validation is performed in two parts: first against experimental melting of pure Gallium in a rectangular cavity, and second against an experimental triplex tube heat exchanger with RT82 paraffin and Al2O3 nanoparticles.
- Simulations were run in OpenFOAM CFD version 6; the authors performed three consecutive charging/discharging cycles for 0% and 10% nano PCM under specified constant boundary temperatures.
## Limitations
- The paper states that the single-phase model is inadequate for multi-cycle NePCM operation because it assumes homogeneous nanoparticle distribution and cannot capture slip mechanisms.
- The text makes evident that the exact quantitative results are tied to the specific geometry and conditions studied: a 2D triplex tube heat exchanger, 10% Al2O3 NePCM, and the chosen temperature cycles; this limits direct generalization from the reported simulations.
- Not stated in the paper.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Figures








Verification
Claims the paper makes
2 Valid · 0 Not valid · 4 Not checked · 33 Own results and interpretations
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“In fact, this model (single-phase model) has been demonstrated45–47 to lack the ability to predict the correct magnitude of the heat transfer enhancement, particularly, for nanoparticle concentrations higher than 1%.”
§ A critical assessment of nanoparticles enhanced phase change materials (NePCMs) for latent heat energy storage applications > Introduction
What the sources say
- Not checked — no full text of the sourcecites [45] Buongiorno, J. Convective transport in nanofluids. J. Heat Transf. 128, 240–250 (2006). source
- Not checked — no full text of the sourcecites [46] Haddad, Z., Abu-Nada, E., Oztop, H. F. & Mataoui, A. Natural convection in nanofluids: Are the thermophoresis and Brownian motion effects significant in nanofluid heat transfer enhancement?. Int. J. Therm. Sci. 57, 152–162 (2012). source
- Partly supportedcites [47] Amidu, M. A., Addad, Y., Riahi, M. K. & Abu-Nada, E. Numerical investigation of nanoparticles slip mechanisms impact on the natural convection heat transfer characteristics of nanofluids in an enclosure. Sci. Rep. 11, 25 (2021). sourceExperimental — accuracy not yet measured
In “Validation of the models and discussion of results” (page unavailable), the paper concludes that the single-phase model is inadequate for quantitative prediction at high nanoparticle concentration, notably 3%; at 1%, it reports reasonable agreement with experiments. The reported error concerns the magnitude of heat-transfer deterioration, not enhancement, and the paper does not establish the claim for all concentrations above 1%. (LLM, conf=0.88)
boosted- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“On the other hand, a more advanced two-phase model taking into account the Brownian diffusion and thermophoresis diffusion slip mechanisms as originally proposed by Buongiorno45, then further improved for numerical stability by Riahi et al.48, and upgraded by Amidu et al.47 to also include nanoparticles sedimentation effects, would be more suitable for such multi-cycle simulations.”
§ A critical assessment of nanoparticles enhanced phase change materials (NePCMs) for latent heat energy storage applications > Introduction
What the sources say
- Not checked — no full text of the sourcecites [45] Buongiorno, J. Convective transport in nanofluids. J. Heat Transf. 128, 240–250 (2006). source
- Partly supportedcites [48] Riahi, M. K., Ali, M., Addad, Y. & Abu-Nada, E. Combined Newton–Raphson and streamlines-upwind Petrov–Galerkin iterations for nanoparticles transport in buoyancy-driven flow. J. Eng. Math. 132, 22 (2022). sourceExperimental — accuracy not yet measured
Our copy supports only the stability half of the attribution: Section 4.2 (p. 9) states the advection-dominated nanoparticle equation exhibits spurious oscillations and 'we use the SUPG method, which provides numerical stability', reinforced in 5.1 (pp. 14-16, Figures 3-4) and the Conclusion (p. 21). The rest of the paraphrase is not this paper's: its two-phase Buongiorno model contains only Brownian motion and thermophoresis (Abstract, p. 1), it explicitly reports that those two terms alone cannot reproduce the heat-transfer impairment and that 'additional forces might have to be accounted for' (Conclusion, p. 21) — sedimentation is nowhere included; and the study is restricted to the steady, time-invariant state (2.1, p. 3), so it says nothing about multi-cycle simulations. Indeed Section 5.3 (p. 20) argues the opposite about suitability, noting the concentration variation is 'marginal' and would not give dramatically different outcomes from a single-phase approach. (LLM, conf=0.78)
- Partly supportedcites [47] Amidu, M. A., Addad, Y., Riahi, M. K. & Abu-Nada, E. Numerical investigation of nanoparticles slip mechanisms impact on the natural convection heat transfer characteristics of nanofluids in an enclosure. Sci. Rep. 11, 25 (2021). sourceExperimental — accuracy not yet measured
In the section proposing the combined two-phase model (page not available), the paper says its model includes Brownian diffusion, thermophoretic diffusion, and sedimentation, and gives a more complete description of the flow physics than the models it compares. It does not assess multi-cycle simulations or state that the model is more suitable for them; its time-dependent numerical tests concern convergence toward steady-state results. (LLM, conf=0.86)
hedgedstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper states — it cites no source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“For this case, the two-phase model predictions are superior to the ones obtained with the classical single-phase model.”
§ A critical assessment of nanoparticles enhanced phase change materials (NePCMs) for latent heat energy storage applications > Abstract Phase change material (PCM) laden with nanoparticles has been testified as a notable contender to increase the effectiveness of latent heat thermal energy storage (TES) units during charging and discharging modes. In this study, a numerical model is developed and implemented based on the coupling between an advanced two-phase model for the nanoparticles-enhanced PCM (NePCM) and the enthalpy-porosity formulation for the transient behavior of the phase change. Therefore, a porosity source term is added to the nanoparticles transport equation to account for the particles' frozen state in regions occupied by solid PCM. This two-phase model includes three main nanoparticles’ slip mechanisms: Brownian diffusion, thermophoresis diffusion, and sedimentation. A two-dimensional model of a triplex tube heat exchanger is considered and different charging and discharging configurations are analyzed. Compared to pure PCM, results show a substantial heat transfer enhancement during the charging and discharging cycle in which a homogeneous distribution of nanoparticles is considered as the initial condition. For this case, the two-phase model predictions are superior to the ones obtained with the classical single-phase model. In the case of multi-cycle charging and discharging, a significant deterioration of the heat transfer rate is observed using the two-phase model while such assessment is senseless using the single-phase mixture model due to the physical assumptions upon which this model is formulated. The two-phase model results reveal that, for a NePCM with high nanoparticles concentration (> 1%), the melting performance during the second charging cycle is reduced by 50% compared to the first one. This performance degradation is attributed to a noteworthy non-homogeneous distribution of the nanoparticles at the beginning of the second charging cycle. The dominant nanoparticles migration mechanism, in this scenario, is the one resulting from sedimentation effects.
plainstates an associationSingle case- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Rests on an assumption not shown here.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“The two-phase model results reveal that, for a NePCM with high nanoparticles concentration (> 1%), the melting performance during the second charging cycle is reduced by 50% compared to the first one.”
§ A critical assessment of nanoparticles enhanced phase change materials (NePCMs) for latent heat energy storage applications > Abstract Phase change material (PCM) laden with nanoparticles has been testified as a notable contender to increase the effectiveness of latent heat thermal energy storage (TES) units during charging and discharging modes. In this study, a numerical model is developed and implemented based on the coupling between an advanced two-phase model for the nanoparticles-enhanced PCM (NePCM) and the enthalpy-porosity formulation for the transient behavior of the phase change. Therefore, a porosity source term is added to the nanoparticles transport equation to account for the particles' frozen state in regions occupied by solid PCM. This two-phase model includes three main nanoparticles’ slip mechanisms: Brownian diffusion, thermophoresis diffusion, and sedimentation. A two-dimensional model of a triplex tube heat exchanger is considered and different charging and discharging configurations are analyzed. Compared to pure PCM, results show a substantial heat transfer enhancement during the charging and discharging cycle in which a homogeneous distribution of nanoparticles is considered as the initial condition. For this case, the two-phase model predictions are superior to the ones obtained with the classical single-phase model. In the case of multi-cycle charging and discharging, a significant deterioration of the heat transfer rate is observed using the two-phase model while such assessment is senseless using the single-phase mixture model due to the physical assumptions upon which this model is formulated. The two-phase model results reveal that, for a NePCM with high nanoparticles concentration (> 1%), the melting performance during the second charging cycle is reduced by 50% compared to the first one. This performance degradation is attributed to a noteworthy non-homogeneous distribution of the nanoparticles at the beginning of the second charging cycle. The dominant nanoparticles migration mechanism, in this scenario, is the one resulting from sedimentation effects.
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Rests on an assumption not shown here.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“The dominant nanoparticles migration mechanism, in this scenario, is the one resulting from sedimentation effects.”
§ A critical assessment of nanoparticles enhanced phase change materials (NePCMs) for latent heat energy storage applications > Abstract Phase change material (PCM) laden with nanoparticles has been testified as a notable contender to increase the effectiveness of latent heat thermal energy storage (TES) units during charging and discharging modes. In this study, a numerical model is developed and implemented based on the coupling between an advanced two-phase model for the nanoparticles-enhanced PCM (NePCM) and the enthalpy-porosity formulation for the transient behavior of the phase change. Therefore, a porosity source term is added to the nanoparticles transport equation to account for the particles' frozen state in regions occupied by solid PCM. This two-phase model includes three main nanoparticles’ slip mechanisms: Brownian diffusion, thermophoresis diffusion, and sedimentation. A two-dimensional model of a triplex tube heat exchanger is considered and different charging and discharging configurations are analyzed. Compared to pure PCM, results show a substantial heat transfer enhancement during the charging and discharging cycle in which a homogeneous distribution of nanoparticles is considered as the initial condition. For this case, the two-phase model predictions are superior to the ones obtained with the classical single-phase model. In the case of multi-cycle charging and discharging, a significant deterioration of the heat transfer rate is observed using the two-phase model while such assessment is senseless using the single-phase mixture model due to the physical assumptions upon which this model is formulated. The two-phase model results reveal that, for a NePCM with high nanoparticles concentration (> 1%), the melting performance during the second charging cycle is reduced by 50% compared to the first one. This performance degradation is attributed to a noteworthy non-homogeneous distribution of the nanoparticles at the beginning of the second charging cycle. The dominant nanoparticles migration mechanism, in this scenario, is the one resulting from sedimentation effects.
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
21 more claims
Create a free account to see all 39 claims and every source verdict.
- It may state two separate claims as one. 12
- Probably not a substantial claim. 3
Citations
Cites
Convective Transport in Nanofluids
Buongiorno, J. (2006) · Journal of Heat Transfer · doi:10.1115/1.2150834 · Cited by 7,013
Buoyancy-driven heat transfer enhancement in a two-dimensional enclosure utilizing nanofluids
Khanafer, K., Vafai, K., & Lightstone, M. (2003) · International Journal of Heat and Mass Transfer · doi:10.1016/s0017-9310(03)00156-x · Cited by 2,975
Review of convective heat transfer enhancement with nanofluids
Kakaç, S., & Pramuanjaroenkij, A. (2009) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2009.02.006 · Cited by 1,946
Enhanced Thermal Conductivity through the Development of Nanofluids
Eastman, J. A., Choi, U. S., Li, S., Thompson, L. J., & Lee, S. (1996) · MRS Proceedings · doi:10.1557/proc-457-3 · Cited by 1,140
A benchmark study on the thermal conductivity of nanofluids
Buongiorno, J., Venerus, D. C., Prabhat, N., McKrell, T., Townsend, J., Christianson, R., Tolmachev, Y. V., Keblinski, P., Hu, L.-W., Alvarado, J. L., et al. (2009) · Journal of Applied Physics · doi:10.1063/1.3245330 · Cited by 1,096
Vajjha, R. S., & Das, D. K. (2009) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2009.06.027 · Cited by 908
Ho, C. J., Liu, W. K., Chang, Y. S., & Lin, C. C. (2010) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2010.02.013 · Cited by 816
Phase change materials (PCM) for cooling applications in buildings: A review
Souayfane, F., Fardoun, F., & Biwole, P.-H. (2016) · Energy and Buildings · doi:10.1016/j.enbuild.2016.04.006 · Cited by 813
Khodadadi, J. M., & Hosseinizadeh, S. F. (2007) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2007.02.005 · Cited by 715
Melting and Solidification of a Pure Metal on a Vertical Wall
Gau, C., & Viskanta, R. (1986) · Journal of Heat Transfer · doi:10.1115/1.3246884 · Cited by 655
Research works printed but not linked: 2
- Amidu, M. A. & Addad, Y. Numerical prediction of the reactor pressure vessel melting under IVR-ERVC conditions. Adv. Therm. Hydraul. 2020, 582–590 (2020).
- Vesilind, P. A. Design of prototype thickeners from batch settling tests. Water Sewage Works 115, 302–307 (1968).
Cited by
Nano-enhanced phase change materials: Fundamentals and applications
Said, Z., Pandey, A. K., Tiwari, A. K., Kalidasan, B., Jamil, F., Thakur, A. K., Tyagi, V. V., Sarı, A., & Ali, H. M. (2024) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2024.101162 · Cited by 386
Self-citationHussain, S., Prakash, J., Almutairi, B. N., & Ramesh, K. (2024) · Journal of Magnetism and Magnetic Materials · doi:10.1016/j.jmmm.2024.171808 · Cited by 57
Phase change materials in thermal management of Li-ion batteries: A state-of-the-art review
Talebizadehsardari, P., Hosseinzadeh, K., Mohammed, H. I., Maarof, H. A., Rashid, F. L., Togun, H., Biswas, N., Miaari, A. A., Ali, H. M., Rocca, A. L., et al. (2025) · Journal of Energy Storage · doi:10.1016/j.est.2025.119782 · Cited by 59
Ali, M. I. H., Alkaabi, A. K., & Lee, J. I. (2022) · Nuclear Engineering and Design · doi:10.1016/j.nucengdes.2022.111819 · Cited by 49
Self-citationRecent Advances in Phase Change Energy Storage Materials: Developments and Applications
Abdullah, M., Obayedullah, M., & Musfika, S. A. (2025) · International Journal of Energy Research · doi:10.1155/er/6668430 · Cited by 43
“Furthermore, choosing particular PCMs — like Mg84Cu16 — can result in higher loading rates and thermal conductivity, which makes them attractive for use in thermal storage applications [129].”
Influential
Metadata
- Authors
- Amidu, M. A., Ali, M., Alkaabi, A. K., & Addad, Y.
- Affiliations
- Khalifa University of Science and Technology (AE)
- Corresponding author
- Addad, Yacine
- Venue
- Scientific Reports
- Published
- 2023-05-15
- Volume
- 13
- Issue
- 1
- Pages
- 7829-7829
- ISSN
- 2045-2322 (ISSN-L)
- PMC
- PMC10185680
- OpenAlex
- W4376642651
- Cited by
- 101
- References
- 50
- Citations by year
- 2026: 33 · 2025: 39 · 2024: 22 · 2023: 6
- FWCI
- 9.82
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- cc-by
- creativecommons.org/licenses/by/4.0 (tdm)
- creativecommons.org/licenses/by/4.0 (vor)
- Locations
- Scientific Reports (publishedVersion, cc-by)
- SSRN Electronic Journal (acceptedVersion)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- Khalifa University of science and technology
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Phase Change Materials Research
- Physical Sciences › Engineering › Mechanical Engineering › Adsorption and Cooling Systems
- Physical Sciences › Chemical Engineering › Fluid Flow and Transfer Processes › Nanofluid Flow and Heat Transfer
- Keywords
- latent heat storage, two-phase model, Brownian diffusion, thermophoresis, sedimentation, nanoparticle migration, triplex tube heat exchanger, charging and discharging cycles, heat transfer enhancement
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-10, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-10 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol and qwen3.8-omni-flash).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A critical assessment of nanoparticles enhanced phase change materials (NePCMs) for latent heat energy storage applications. https://app.cochat.ai/papers/10.1038/s41598-023-34907-0
- The paper
- Amidu, M. A., Ali, M., Alkaabi, A. K., & Addad, Y. (2023). A critical assessment of nanoparticles enhanced phase change materials (NePCMs) for latent heat energy storage applications. Scientific Reports. https://doi.org/10.1038/s41598-023-34907-0
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.