The DOI matches its Crossref record; the references it cites are not checked yet.
Extraction and Separation of Germanium Using Cyanex 301/Cyanex 923. Its Recovery from Transistor Waste
Abstract
The extraction of Ge(IV) from HCl, HNO3 and H2SO4 media in toluene solution of Cyanex 301 and Cyanex 923 is investigated. It is almost quantitatively extracted (∼95%) in Cyanex 301 and Cyanex 923 at 8 molL−1 HCl but the extractions from H2SO4 and HNO3 are poor in the entire investigated range of acid molarity. Detailed investigations were carried out from HCl medium. Based on the slope analysis data the extracting species is identified as GeCl4·2R (R=Cyanex 301/Cyanex 923). The extraction of Ge(IV) is higher and comparable in diluents like toluene, n‐hexane and kerosene (160–200°C) and there is no correlation between the dielectric constant and the percent extraction. The extractants are stable towards prolonged acid contact and there is negligible loss in their extraction efficiency even after recycling them for several cycles. The extraction behavior of commonly associated metal ions namely As(V)/(III), Sn(IV), Tl(III), In(III), Ga(III), Fe(III), Al(III), Hg(II), and Cu(II) has also been investigated. Based on the partition data conditions for attaining some binary and ternary separations involving Ge(IV) have been optimized. The separation data have been fused to develop a scheme for the recovery (93%) of pure germanium (∼99%) from semi conductor waste.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“In the same way, another study on the successive extraction (from 8 M HCl) by Cyanex 301 and stripping of Ge(IV) by 0.5 M HCl revealed a negligible di erence (2 to 3%) in the extraction / stripping percentage of the metal ion up to 15 cycles [70].”
From Review on the Comparison of the Chemical Reactivity of Cyanex 272, Cyanex 301 and Cyanex 302 for Their Application to Metal Separation from Acid Media (2020) · cites this paper as [70]
Citations
The citation lists are queued
They are fetched later and appear here then.
References 9 · Cited by 35
Research works printed but not linked: 5
- Yakabe K., 1981, Nippon Kagaku Kaishi, 6, 969, 10.1246/nikkashi.1981.969 · doi:10.1246/nikkashi.1981.969
- Xing C., 1996, Huaxue Shiji, 18, 291
- Keqi L., 1998, Yelian Bufen, 5, 37
- Wang F., 1997, Huaxue Yanjiu Yu Yingyong, 9, 455
- Francis, T., Meera, R. and Reddy, M. L.P. Extraction and separation of Mercury (II) from the brine sludge of a chlor‐alkali industry using thiosubstituted organophosphinic acids. Proc. International Symp. Solvent Extraction (ISSE). 26–27 Sept. pp.169–178.
Metadata
- Authors
- Gupta, B., & Mudhar, N.
- Affiliations
- Indian Institute of Technology Roorkee (IN)
- Corresponding author
- Gupta, Bina
- ORCID
- Gupta, Bina
- Venue
- Separation Science and Technology
- Publisher
- Informa UK Limited
- Published
- 2006-03
- Volume
- 41
- Issue
- 3
- Pages
- 549-572
- ISSN
- 0149-6395 (ISSN-L)
- 1520-5754
- OpenAlex
- W2012272993
- Cited by
- 35
- References
- 9
- Citations by year
- 2026: 4 · 2025: 6 · 2024: 1 · 2022: 5 · 2021: 4 · 2020: 3 · 2019: 1 · 2018: 1 · 2017: 5 · 2013: 1 · 2012: 1
- FWCI
- 1.71
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Separation Science and Technology (publishedVersion)
- Topics
- Physical Sciences › Materials Science › Metals and Alloys › Extraction and Separation Processes
- Physical Sciences › Environmental Science › Waste Management and Disposal › Recycling and Waste Management Techniques
- Physical Sciences › Chemistry › Inorganic Chemistry › Radioactive element chemistry and processing
- Keywords
- germanium recovery, Cyanex 301, Cyanex 923, solvent extraction, slope analysis, ternary separation, binary separation
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Extraction and Separation of Germanium Using Cyanex 301/Cyanex 923. Its Recovery from Transistor Waste. https://app.cochat.ai/papers/10.1080/01496390500525021
- The paper
- Gupta, B., & Mudhar, N. (2006). Extraction and Separation of Germanium Using Cyanex 301/Cyanex 923. Its Recovery from Transistor Waste. Separation Science and Technology. https://doi.org/10.1080/01496390500525021
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.