Adsorption of Carbon Dioxide onto Activated Carbon and Nitrogen-Enriched Activated Carbon: Surface Changes, Equilibrium, and Modeling of Fixed-Bed Adsorption
The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
It has been reported that the CO2 adsorption capacity of the N-enriched activated carbon can increase or decrease. In this study a commercial activated carbon was functionalized with 3-chloropropylamine hydrochloride and its adsorption characteristics in a fixed-bed column were investigated. The N-enriched activated carbon presented lower BET surface area than the original activated carbon suggesting that the nitrogen incorporation partially blocks the access of N2 to the small pores. Although the surface basicity has increased it is not accomplished by an increase of the capacity of the adsorption of the N-enriched activated carbon. The breakthrough curves in a fixed bed column were obtained at different temperatures (301 K, 323 K, 373 K, and 423 K) and a total pressure of 1.01 bar using CO2 diluted in helium at two feed concentrations—10% and 20% (v/v). A model based on the Linear Driving Force (LDF) model for mass transfer was used to estimate the overall mass transfer coefficient and reproduced the breakthrough curves satisfactorily.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Surface area and pore texture of catalysts
Leofanti, G., Padovan, M., Tozzola, G., & Venturelli, B. (1998) · Catalysis Today · doi:10.1016/s0920-5861(98)00050-9 · Cited by 1,883
Cited by
Hedin, N., Andersson, L., Bergström, L., & Yan, J. (2013) · Applied Energy · doi:10.1016/j.apenergy.2012.11.034 · Cited by 424
Plaza, M. G., García, S., Rubiera, F., Pis, J. J., & Pevida, C. (2010) · Chemical Engineering Journal · doi:10.1016/j.cej.2010.07.030 · Cited by 365
A review of mathematical modeling of fixed-bed columns for carbon dioxide adsorption
Shafeeyan, M. S., Wan Daud, W. M. A., & Shamiri, A. (2014) · Chemical Engineering Research and Design · doi:10.1016/j.cherd.2013.08.018 · Cited by 293
“…the density of the column wall, respectively; aw represents the ratio of the internal surface area to the volume of the column wall (Da Silva et al., 1999; Dantas et al., 2009; Huang and Fair, 1988); aa denotes the ratio of the external surface area to the volume of the column wall; U is the…”
BackgroundBen-Mansour, R., & Qasem, N. A. A. (2018) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.11.010 · Cited by 139
Silicoaluminophosphates as CO2 sorbents
Cheung, O., Liu, Q., Bacsik, Z., & Hedin, N. (2012) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2012.02.003 · Cited by 80
Metadata
- Authors
- Dantas, T. L. P., Amorim, S. M., Luna, F. M. T., Silva, I. J., de Azevedo, D. C. S., Rodrigues, A. E., & Moreira, R. F. P. M.
- Venue
- Separation Science and Technology
- Publisher
- Informa UK Limited
- Published
- 2009-12-31
- Volume
- 45
- Issue
- 1
- Pages
- 73-84
- ISSN
- 0149-6395 (ISSN-L)
- 1520-5754
- OpenAlex
- W2033262072
- Cited by
- 81
- References
- 1
- FWCI
- 7.99
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Adsorption of Carbon Dioxide onto Activated Carbon and Nitrogen-Enriched Activated Carbon: Surface Changes, Equilibrium, and Modeling of Fixed-Bed Adsorption. https://app.cochat.ai/papers/10.1080/01496390903401762
- The paper
- Dantas, T. L. P., Amorim, S. M., Luna, F. M. T., Silva, I. J., de Azevedo, D. C. S., Rodrigues, A. E., & Moreira, R. F. P. M. (2009). Adsorption of Carbon Dioxide onto Activated Carbon and Nitrogen-Enriched Activated Carbon: Surface Changes, Equilibrium, and Modeling of Fixed-Bed Adsorption. Separation Science and Technology. https://doi.org/10.1080/01496390903401762
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.