Nanoscale zinc oxide based heterojunctions as visible light active photocatalysts for hydrogen energy and environmental remediation
The DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.
Abstract
In the recent years, zinc oxide has emerged as one of the promising alternate materials to titania for photocatalytic applications due to its several advantages properties. This review recapitulates the ongoing advancement in the field of ZnO-based heterojunctions as visible light responsive photocatalysts for energy conversion (hydrogen evolution) and environmental remediation (pollutants degradation) applications. After a short introduction about zinc oxide materials, the various approaches utilized in the design and development of efficient ZnO-based nanoheterostructures has been discussed in detail. Specifically, strategies such as coupling ZnO with other semiconductors, supporting on carbonaceous materials, decorating with noble metal nanoparticles, doping with heteroatoms and engineering defects in the semiconductor material have been elaborated with a particular emphasis on hydrogen energy and organic pollutants removal. Finally, the future perspective of this material has been highlighted. This comprehensive review not only summarizes the recent literature in this topic, but also provides a detailed insight on the scope of this material for hydrogen energy and environmental remediation applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Semiconductor-based Photocatalytic Hydrogen Generation
Chen, X., Shen, S., Guo, L., & Mao, S. S. (2010) · Chemical Reviews · doi:10.1021/cr1001645 · Cited by 7,876 · cited 1×
“Hydrogen (H2) is a clean, sustainable, and non-carbon energy source, which has a great potential to resolve the energy demand and environmental pollution.([10]) The photocatalytic water splitting for the generation of renewable energy in the form of H2 has become a promising approach since Fujishima and Honda reported…”
BackgroundXie, J., Zhang, H., Li, S., Wang, R., Sun, X., Zhou, M., Zhou, J., Lou, X. W. (., & Xie, Y. (2013) · Advanced Materials · doi:10.1002/adma.201302685 · Cited by 3,079
Photocatalytic Water Splitting: Recent Progress and Future Challenges
Maeda, K., & Domen, K. (2010) · The Journal of Physical Chemistry Letters · doi:10.1021/jz1007966 · Cited by 2,739 · cited 1×
“In case of photocatalytic water splitting, the electronic structure of photocatalytic material is very important, as band positions decide the fate of this reaction.([49]) It is known that water splitting process requires external energy for its feasibility (Gibbs free energy = +237 kJ mol), which corresponds to the m…”
BackgroundGraphene-based semiconductor photocatalysts
Xiang, Q., Yu, J., & Jaroniec, M. (2012) · Chem. Soc. Rev. · doi:10.1039/c1cs15172j · Cited by 2,730 · cited 3×
“into environment annually, which has raised the level of environmental pollution.([1,2]) Also, the limited resources of energy are depleting and it is highly desirable to look for alternative energy options to increase the world’s energy security.”
BackgroundRecent developments of zinc oxide based photocatalyst in water treatment technology: A review
Lee, K. M., Lai, C. W., Ngai, K. S., & Juan, J. C. (2016) · Water Research · doi:10.1016/j.watres.2015.09.045 · Cited by 2,341 · cited 2×
“In order to overcome aforementioned issues mainly with ZnO-based photocatalysts and to increase the photocatalytic efficiency with enhanced photoresponse, enormous efforts have been devoted by researchers.([29,57]) The strategies like designing of composite semiconductors, noble metal doping, nonmetal doping, dye sens…”
BackgroundKumar, A., Kumar, S., Bahuguna, A., Kumar, A., Sharma, V., & Krishnan, V. (2017) · Materials Chemistry Frontiers · doi:10.1039/c7qm00362e · Cited by 154
Self-citationKumar, A., Schuerings, C., Kumar, S., Kumar, A., & Krishnan, V. (2018) · Beilstein Journal of Nanotechnology · doi:10.3762/bjnano.9.62 · Cited by 153 · cited 1×
“ZnO supported on graphitic carbon nitride Graphitic carbon nitride (g-C3N4), has emerged as an attractive metal-free polymeric organic material owing to its properties like a low-cost appropriate band gap, visible light activity, earth-abundant elements, high chemical and thermal stability.([132]) Due to the band gap…”
BackgroundSelf-citation
Cited by
Perovskite Oxide Based Materials for Energy and Environment-Oriented Photocatalysis
Kumar, A., Kumar, A., & Krishnan, V. (2020) · ACS Catalysis · doi:10.1021/acscatal.0c02947 · Cited by 636
Self-citationKumar, A., Choudhary, P., Kumar, A., Camargo, P. H. C., & Krishnan, V. (2022) · Small · doi:10.1002/smll.202101638 · Cited by 441
Self-citationAbdullah, F. H., Bakar, N. H. H. A., & Bakar, M. A. (2022) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2021.127416 · Cited by 264
Kumar, A., Navakoteswara Rao, V., Kumar, A., Mushtaq, A., Sharma, L., Halder, A., Pal, S. K., Shankar, M. V., & Krishnan, V. (2020) · ACS Applied Energy Materials · doi:10.1021/acsaem.0c02229 · Cited by 67
Self-citation
Metadata
- Authors
- Kumar, S., Kumar, A., Kumar, A., & Krishnan, V.
- Venue
- Catalysis Reviews
- Publisher
- Informa UK Limited
- Published
- 2019-11-01
- Volume
- 62
- Issue
- 3
- Pages
- 346-405
- ISSN
- 0161-4940 (ISSN-L)
- 1520-5703
- OpenAlex
- W2988812222
- Cited by
- 166
- References
- 7
- FWCI
- 3.35
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.