The Liquid/Liquid Sedimentation Process: From Droplet Coalescence to Technologically Enhanced Water/Oil Emulsion Gravity Separators: A Review
The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Abstract
Crude oil is nearly always produced along with water in the form of water/crude oil emulsions. Gravity settlers are the most common technology to separate these dispersions. A short description is given of the coalescence mechanism (droplet collision, film drainage, film rupture). Three micromechanical sedimentation models (Hartland, Lobo, Henschke) and one set of design rules (Polderman) are described. IFP experimental data are presented that confirm the difference between sedimentation‐based and coalescence‐based models. Technological enhancements used in order to accelerate and/or increase the separation (heating, chemical demulsifiers, mechanical barriers, electrocoalescence, ultrasound, microwaves) are presented.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Description of interaction processes in agitated liquid-liquid dispersions
Coulaloglou, C. A., & Tavlarides, L. L. (1977) · Chemical Engineering Science · doi:10.1016/0009-2509(77)85023-9 · Cited by 1,245
Breakage and coalescence models for drops in turbulent dispersions
Tsouris, C., & Tavlarides, L. L. (1994) · AIChE Journal · doi:10.1002/aic.690400303 · Cited by 544
Our current understanding of water-in-crude oil emulsions.
Sjöblom, J., Aske, N., Harald Auflem, I., Brandal, Ø., Erik Havre, T., Sæther, Ø., Westvik, A., Eng Johnsen, E., & Kallevik, H. (2003) · Advances in Colloid and Interface Science · doi:10.1016/s0001-8686(02)00066-0 · Cited by 476 · cited 1×
“, flow through a porous medium, or from processing after the wellhead due to turbulence and pressure drop created by choke valves and pipe accidents.([1,2]) In order to respond to international specifications, the oil has to be separated from the water.”
BackgroundChemical Demulsification of Stable Crude Oil and Bitumen Emulsions in Petroleum Recovery—A Review
Angle, C. (2001) · Encyclopedic Handbook of Emulsion Technology · doi:10.1201/9781420029581.ch24 · Cited by 60
Cited by
A Comprehensive Review on Emulsions and Emulsion Stability in Chemical and Energy Industries
Goodarzi, F., & Zendehboudi, S. (2019) · The Canadian Journal of Chemical Engineering · doi:10.1002/cjce.23336 · Cited by 564
Low, L. E., Siva, S. P., Ho, Y. K., Chan, E. S., & Tey, B. T. (2020) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2020.102117 · Cited by 557
A review of treatment technologies for produced water in offshore oil and gas fields
Liu, Y., Lu, H., Li, Y., Xu, H., Pan, Z., Dai, P., Wang, H., & Yang, Q. (2021) · Science of The Total Environment · doi:10.1016/j.scitotenv.2021.145485 · Cited by 278
Metadata
- Authors
- Frising, T., Noïk, C., & Dalmazzone, C.
- Venue
- Journal of Dispersion Science and Technology
- Publisher
- Informa UK Limited
- Published
- 2006-10
- Volume
- 27
- Issue
- 7
- Pages
- 1035-1057
- ISSN
- 0193-2691 (ISSN-L)
- 1532-2351
- OpenAlex
- W1979555790
- Cited by
- 225
- References
- 4
- FWCI
- 1.97
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.