Split-plot designs for robust product experimentation
The DOI matches its Crossref record; 10 of the 10 references it cites were found in a registry or an index.
Abstract
Genichi Taguchi has emphasized the use of designed experiments in several novel and important applications. In this paper we focus on the use of statistical experimental designs in designingproducts to be robust to environmental conditions. The engineering concept of robust product design is very important because it is frequently impossible or prohibitively expensive to control or eliminate variation resulting from environmental conditions. Robust product design enablesthe experimenter to discover how to modify the design of the product to minimize the effect dueto variation from environmental sources. In experiments of this kind, Taguchi's total experimental arrangement consists of a cross-product of two experimental designs:an inner array containing the design factors and an outer array containing the environmental factors. Except in situations where both these arrays are small, this arrangement may involve a prohibitively large amount of experimental work. One of the objectives of this paper is to show how this amount of work can be reduced. In this paper we investigate the applicability of split-plot designs for thisparticular experimental situation. Consideration of the efficiency of split-plot designs and anexamination of several variants of split-plot designs indicates that experiments conductedin a split-plot mode can be of tremendous value in robust product design since they not only enable the contrasts of interest to be estimated efficiently but also the experiments can be considerably easier to conduct than the designs proposed by Taguchi.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Principles and Procedures of Statistics: A Biometrical Approach
Steel, R. G. D., & Torrie, J. H. (1980) · Andalas University Repository (Andalas University) · Cited by 15,510
Design and Analysis of Experiments
(2007) · Modern Engineering Statistics · doi:10.1002/9780470187548.ch12 · Cited by 1,424
(1958) · Medical Entomology and Zoology · Cited by 1,059
Use of Half-Normal Plots in Interpreting Factorial Two-Level Experiments
Daniel, C. (1959) · Technometrics · doi:10.1080/00401706.1959.10489866 · Cited by 798
Signal-to-Noise Ratios, Performance Criteria, and Transformations
Box, G. (1988) · Technometrics · doi:10.1080/00401706.1988.10488313 · Cited by 605
Self-citationAn Analysis for Unreplicated Fractional Factorials
Box, G. E. P., & Meyer, R. D. (1986) · Technometrics · doi:10.1080/00401706.1986.10488093 · Cited by 576
Self-citationThe Design and Analysis of Experiments
KEMPTHORNE, O. (1952) · Soil Science · doi:10.1097/00010694-195205000-00012 · Cited by 518
Applications of Statistics to Industrial Experimentation
Daniel, C. (1976) · Wiley Series in Probability and Statistics · doi:10.1002/9780470316467 · Cited by 354
Applications of Statistics to Industrial Experimentation.
Weisberg, S., & Daniel, C. (1978) · Journal of the American Statistical Association · doi:10.2307/2286563 · Cited by 304
Some Two-Level Factorial Plans With Split Plot Confounding'
Addelman, S. (1964) · Technometrics · doi:10.1080/00401706.1964.10490182 · Cited by 39
Cited by
Taguchi's Parameter Design: A Panel Discussion
Nair, V. N., Abraham, B., MacKay, J., Box, G., Kacker, R. N., Lorenzen, T. J., Lucas, J. M., Myers, R. H., Vining, G. G., Nelder, J. A., et al. (1992) · Technometrics · doi:10.1080/00401706.1992.10484904 · Cited by 713
Self-citationResponse Surface Methodology: A Retrospective and Literature Survey
Myers, R. H., Montgomery, D. C., Vining, G. G., Borror, C. M., & Kowalski, S. M. (2004) · Journal of Quality Technology · doi:10.1080/00224065.2004.11980252 · Cited by 704
AN OVERVIEW OF TAGUCHI METHOD AND NEWLY DEVELOPED STATISTICAL METHODS FOR ROBUST DESIGN
TSUI, K.-L. (1992) · IIE Transactions · doi:10.1080/07408179208964244 · Cited by 340
Split-Plot Designs: What, Why, and How
Jones, B., & Nachtsheim, C. J. (2009) · Journal of Quality Technology · doi:10.1080/00224065.2009.11917790 · Cited by 242
“In this alternative, Box and Jones (1992) considered the use of strip-plot experiments, which can further reduce the cost of the experiment for either of alternatives (1) and (2).”
BackgroundMethodInfluentialOutperforming Completely Randomized Designs
Goos, P., & Vandebroek, M. (2004) · Journal of Quality Technology · doi:10.1080/00224065.2004.11980249 · Cited by 86
Metadata
- Authors
- Box, G., & Jones, S.
- Venue
- Journal of Applied Statistics
- Publisher
- Informa UK Limited
- Published
- 1992-01
- Volume
- 19
- Issue
- 1
- Pages
- 3-26
- ISSN
- 0266-4763 (ISSN-L)
- 1360-0532
- OpenAlex
- W2094350742
- Cited by
- 241
- References
- 10
- FWCI
- 6.10
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Split-plot designs for robust product experimentation. https://app.cochat.ai/papers/10.1080/02664769200000001
- The paper
- Box, G., & Jones, S. (1992). Split-plot designs for robust product experimentation. Journal of Applied Statistics. https://doi.org/10.1080/02664769200000001
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.