Cited by 19

The DOI matches its Crossref record.

Assessment of thermal regeneration of spent commercial activated carbon for methylene blue dye removal

Mohd Nasir, Muhamad Zulhelmie, Indiran, Guruumurthiy, Ahmad Zaini, Muhammad Abbas·2021·Particulate Science and Technology

Abstract

The present study was aimed to characterize the adsorptive properties of spent commercial activated carbon (SAC) and its regenerated derivatives (Pyro-RAC and CO2-RAC) for the decolourization of methylene blue dye. The materials were characterized for textural properties, thermal gravimetric profile and functional groups. Batch adsorption was evaluated at different concentrations of dye and contact times. The adsorption data were fitted into isotherm and kinetics models. Result shows that the specific area of activated carbons is in the order of Pyro-RAC > CO2-RAC > SAC. Pyro-RAC with a surface area of 768 m2/g exhibits a higher dye removal of 286 mg/g. The adsorption data fitted well with Langmuir and pseudo-first-order kinetics models. The thermal regeneration is feasible, and the adsorption is dependent on surface area, from which the regenerated activated carbon can be useful for the removal of dyes from wastewater.

Overview

Integrity signals

Registry

Crossref · 10.1080/02726351.2020.1775738

Cites

Statistics

Recomputing p-values needs the paper’s full text.

Verification

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

  • Adsorption involves valency forces through sharing or exchange of electrons between adsorbent and dye molecules by covalent forces and ion exchange.

    “The adsorption involves valency forces through the sharing or exchange of electrons between the adsorbent and dye molecules by covalent forces and ion exchange (Mohd Nasir et al., 2021).”

    From Biomass-Based Adsorbents for Removal of Dyes From Wastewater: A Review (2021) · cites this paper as Mohd Nasir et al., 2021

Citations

Cites

No references could be resolved yet.

Research works printed but not linked: 24

  1. 10.1080/02726351.2016.1245689 · DOI
  2. Amuda O. S., 2006, African Journal of Biotechnology, 5, 1483
  3. 10.1007/s10973-016-5419-5 · DOI
  4. 10.1080/01496390601070059 · DOI
  5. 10.1016/j.jece.2017.06.022 · DOI
  6. 10.1111/j.1478-4408.2012.00401.x · DOI
  7. Fabon, M. B., G. J. Legaspi, K. Leyesa, and M. C. Macawile. 2013. Removal of basic dye in water matrix using activated carbon from sugarcane bagasse. International Conference on Innovations in Engineering and Technology, 198–201.
  8. 10.1007/s11814-011-0142-1 · DOI
  9. 10.1016/j.tca.2012.04.026 · DOI
  10. Gulipalli C. H. S., 2011, Journal Engineering Science & Technology, 6, 590
  11. 10.1002/apj.2063 · DOI
  12. Hui T. S., 2015, Jurnal Teknologi, 74, 57
  13. 10.1080/19443994.2016.1168133 · DOI
  14. 10.1016/j.jhazmat.2004.05.022 · DOI · Paper page
  15. 10.2298/JSC140917107M · DOI
  16. 10.1155/2016/4262578 · DOI
  17. Popuri A. K., 2015, International Journal of Chemical Sciences, 13, 1430
  18. 10.2298/TSCI150720048R · DOI
  19. 10.1016/j.fuproc.2013.07.019 · DOI
  20. 10.1016/S0926-3373(02)00155-8 · DOI
  21. 10.1080/02726351.2016.1240127 · DOI
  22. 10.1177/0734242X15615698 · DOI
  23. Venkateswaran V., 2017, International Journal of Science & Technology, 42, 2441
  24. 10.11113/jt.v68.1512 · DOI

Cited by

Sorted by citations

Metadata

Authors
Mohd Nasir, M. Z., Indiran, G., & Ahmad Zaini, M. A.
Affiliations
School of Chemical and Energy Engineering, Faculty of Engineering, Universiti Teknologi Malaysia, Johor, Malaysia
Venue
Particulate Science and Technology
Published
2020-06-12
Volume
39
Issue
4
Pages
504-510
ISSN
  • 0272-6351
  • 1548-0046
Cited by
19
References
0
Language
en
Funders
  • Fundamental Research Grant Scheme (4F995)
  • Ministry of Education Malaysia

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review