The DOI matches its Crossref record; 31 of the 31 references it cites were found in a registry or an index.
Thermoplastics Reinforced with Wood Fillers: A Literature Review
Abstract
Problems concerning the processing of thermoplastics reinforced with wood fillers are discussed. The high level of moisture absorption by the filler, its poor wettability, as well as the insufficient adhesion between untreated filler and the polymer matrix are reasons for the low tensile strength and high moisture sorption of composites. These shortcomings of composites can be prevented by the modification of the interface. The fiber-matrix compatibility and the composites properties can be improved by using some physical (e.g., steam explosion, corona, cold plasma) and chemical (cross-linking and acetylation of cellulose, grafting, use of coupling agents) methods. Modified wood-polymer interaction mechanisms are complex and specific for each definite system and processing conditions. Cellulose cross-linking and acetylation reduce hygroscopicity and swelling of wood and wood composites. Grafting of styrene to wood is effective for wood-polystyrene systems. The best coupling agent for wood-thermoplastics is polymethylenepolyphenyl isocyanate. Silanes coupling effect can be increased with additives to the polymer matrix. Optimizing of technological parameters of wood-thermoplastics processing is necessary.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Stamm, A. J. (1964) · Cited by 1,021
The nature of adhesion in composites of modified cellulose fibers and polypropylene
Felix, J. M., & Gatenholm, P. (1991) · Journal of Applied Polymer Science · doi:10.1002/app.1991.070420307 · Cited by 773
International Encyclopedia of Composites
Lee, S. M. (2001) · Medical Entomology and Zoology · Cited by 497
Wood fibers as reinforcing fillers for polyolefins
Woodhams, R. T., Thomas, G., & Rodgers, D. K. (1984) · Polymer Engineering & Science · doi:10.1002/pen.760241504 · Cited by 391
Maldas, D., Kokta, B. V., & Daneault, C. (1989) · Journal of Applied Polymer Science · doi:10.1002/app.1989.070370313 · Cited by 286
Cellulosic Polymers, Blends and Composites
Gilbert, R. D. (1994) · Cited by 243
Raj, R. G., Kokta, B. V., Maldas, D., & Daneault, C. (1989) · Journal of Applied Polymer Science · doi:10.1002/app.1989.070370420 · Cited by 241
Effect of corona modification on the mechanical properties of polypropylene/cellulose composites
Belgacem, M. N., Bataille, P. F., & Sapieha, S. (1994) · Journal of Applied Polymer Science · doi:10.1002/app.1994.070530401 · Cited by 227
Packham, D. E. (2005) · CERN Document Server (European Organization for Nuclear Research) · Cited by 213
Composites from compounding wood fibers with recycled high density polyethylene
Yam, K. L., Gogoi, B. K., Lai, C. C., & Selke, S. E. (1990) · Polymer Engineering & Science · doi:10.1002/pen.760301109 · Cited by 194
Cited by
Cellulosic nanocomposites: a review
(2008) · BioResources · doi:10.15376/biores.3.3.929-980 · Cited by 901
Espert, A., Vilaplana, F., & Karlsson, S. (2004) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2004.04.004 · Cited by 876
A review of natural fibers used in biocomposites: plant, animal and regenerated cellulose fibers
Ramamoorthy, S. K., Skrifvars, M., & Persson, A. (2015) · Polymer Reviews · doi:10.1080/15583724.2014.971124 · Cited by 801
Bismarck, A., Aranberri‐Askargorta, I., Springer, J., Lampke, T., Wielage, B., Stamboulis, A., Shenderovich, I., & Limbach, H. (2002) · Polymer Composites · doi:10.1002/pc.10485 · Cited by 453
Plant-derived nanostructures: types and applications
Mohammadinejad, R., Karimi, S., Iravani, S., & Varma, R. S. (2016) · Green Chemistry · doi:10.1039/c5gc01403d · Cited by 437
Metadata
- Authors
- BLEDZKI, A. K., REIHMANE, S., & GASSAN, J.
- Venue
- Polymer-Plastics Technology and Engineering
- Publisher
- Informa UK Limited
- Published
- 1998-11
- Volume
- 37
- Issue
- 4
- Pages
- 451-468
- ISSN
- 0360-2559 (ISSN-L)
- 1525-6111
- OpenAlex
- W2156950920
- Cited by
- 364
- References
- 31
- FWCI
- 2.65
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Thermoplastics Reinforced with Wood Fillers: A Literature Review. https://app.cochat.ai/papers/10.1080/03602559808001373
- The paper
- BLEDZKI, A. K., REIHMANE, S., & GASSAN, J. (1998). Thermoplastics Reinforced with Wood Fillers: A Literature Review. Polymer-Plastics Technology and Engineering. https://doi.org/10.1080/03602559808001373
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.