The DOI matches its Crossref record; 95 of the 95 references it cites were found in a registry or an index.
Advances in additive manufacturing of metal-based functionally graded materials
Abstract
Over the 2010s technological improvements allowed metal additive manufacturing to graduate from a prototyping tool to a widespread, full-scale manufacturing process. Among the capabilities still under development, however, is the ability to locally tailor alloy composition and properties to fabricate bulk, complex geometry functionally graded materials (FGMs), eliminating the need for dissimilar-metal welds and joints. The challenge of compositional grading involves overcoming chemical, metallurgical, and thermal property differences to achieve a continuous structure between a wide range of selected combinations of alloys. In this review, examples are discussed of fabricating FGMs joining a variety of combinations of stainless, nickel, titanium and copper alloys, and FGMs joining metals to ceramics and metal-matrix composites. The change in design strategy enabled by practical FGMs may lead to effective use of biomimetic designs that are both much more efficient as well as aesthetically pleasing.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Additive manufacturing of metals
Herzog, D., Seyda, V., Wycisk, E., & Emmelmann, C. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.07.019 · Cited by 4,759
Laser additive manufacturing of metallic components: materials, processes and mechanisms
Gu, D. D., Meiners, W., Wissenbach, K., & Poprawe, R. (2012) · International Materials Reviews · doi:10.1179/1743280411y.0000000014 · Cited by 3,197
Ghaffari, S., Chandorkar, S. A., Wang, S., Ng, E. J., Ahn, C. H., Hong, V., Yang, Y., & Kenny, T. W. (2014) · Scientific Reports · doi:10.1038/srep04331 · Cited by 1,521
Brandl, E., Heckenberger, U., Holzinger, V., & Buchbinder, D. (2012) · Materials & Design · doi:10.1016/j.matdes.2011.07.067 · Cited by 1,151
Processing techniques for functionally graded materials
Kieback, B., Neubrand, A., & Riedel, H. (2003) · Materials Science and Engineering: A · doi:10.1016/s0921-5093(03)00578-1 · Cited by 979
Miyamoto, Y., Kaysser, W. A., Rabin, B. H., Kawasaki, A., & Ford, R. G. (1999) · Materials technology series · doi:10.1007/978-1-4615-5301-4 · Cited by 979
Selective laser melting of aluminium components
Louvis, E., Fox, P., & Sutcliffe, C. J. (2011) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2010.09.019 · Cited by 933
Jia, Q., & Gu, D. (2014) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2013.09.171 · Cited by 905
Dinda, G. P., Dasgupta, A. K., & Mazumder, J. (2009) · Materials Science and Engineering: A · doi:10.1016/j.msea.2009.01.009 · Cited by 858
Wang, Z., Palmer, T. A., & Beese, A. M. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.03.019 · Cited by 830
Self-citationLi, Y., & Gu, D. (2014) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2014.07.006 · Cited by 824
Recent progress in research on tungsten materials for nuclear fusion applications in Europe
Rieth, M., Dudarev, S. L., Gonzalez de Vicente, S. M., Aktaa, J., Ahlgren, T., Antusch, S., Armstrong, D. E. J., Balden, M., Baluc, N., Barthe, M.-F., et al. (2013) · Journal of Nuclear Materials · doi:10.1016/j.jnucmat.2012.08.018 · Cited by 808
Nickel and iron aluminides: an overview on properties, processing, and applications
Deevi, S. C., & Sikka, V. K. (1996) · Intermetallics · doi:10.1016/0966-9795(95)00056-9 · Cited by 772
Making sense of 3-D printing: Creating a map of additive manufacturing products and services
Conner, B. P., Manogharan, G. P., Martof, A. N., Rodomsky, L. M., Rodomsky, C. M., Jordan, D. C., & Limperos, J. W. (2014) · Additive Manufacturing · doi:10.1016/j.addma.2014.08.005 · Cited by 750
Carroll, B. E., Otis, R., Borgonia, J. P., Suh, J.-O., Dillon, R. P., Shapiro, A. A., Hofmann, D. C., Liu, Z., & Beese, A. M. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.02.019 · Cited by 657
Self-citationYadollahi, A., Shamsaei, N., Thompson, S. M., & Seely, D. W. (2015) · Materials Science and Engineering: A · doi:10.1016/j.msea.2015.07.056 · Cited by 650
Torres, M. (2002) · International Journal of Fatigue · doi:10.1016/s0142-1123(01)00205-5 · Cited by 613
Microstructure and mechanical properties of Selective Laser Melted 18Ni-300 steel
Kempen, K., Yasa, E., Thijs, L., Kruth, J.-P., & Van Humbeeck, J. (2011) · Physics Procedia · doi:10.1016/j.phpro.2011.03.033 · Cited by 566
Microstructural and texture development in direct laser fabricated IN718
Parimi, L. L., Ravi, G. A., Clark, D., & Attallah, M. M. (2014) · Materials Characterization · doi:10.1016/j.matchar.2013.12.012 · Cited by 565
Vaezi, M., Chianrabutra, S., Mellor, B., & Yang, S. (2013) · Virtual and Physical Prototyping · doi:10.1080/17452759.2013.778175 · Cited by 548
Tolosa, I., Garciandía, F., Zubiri, F., Zapirain, F., & Esnaola, A. (2010) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-010-2631-5 · Cited by 487
Characterization of stainless steel parts by Laser Metal Deposition Shaping
Zhang, K., Wang, S., Liu, W., & Shang, X. (2013) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2013.09.006 · Cited by 485
Bobbio, L. D., Otis, R., Borgonia, J. P., Dillon, R. P., Shapiro, A. A., Liu, Z., & Beese, A. M. (2017) · Acta Materialia · doi:10.1016/j.actamat.2016.12.070 · Cited by 447
Self-citationConstitutional liquation during dissimilar friction stir welding of Al and Mg alloys
Sato, Y. S., Park, S. H. C., Michiuchi, M., & Kokawa, H. (2004) · Scripta Materialia · doi:10.1016/j.scriptamat.2004.02.002 · Cited by 437
Microstructures of laser-deposited Ti–6Al–4V
Wu, X., Liang, J., Mei, J., Mitchell, C., Goodwin, P. S., & Voice, W. (2004) · Materials & Design · doi:10.1016/j.matdes.2003.09.009 · Cited by 436
Microstructures and Properties of 17-4 PH Stainless Steel Fabricated by Selective Laser Melting
Murr, L. E., Martinez, E., Hernandez, J., Collins, S., Amato, K. N., Gaytan, S. M., & Shindo, P. W. (2012) · Journal of Materials Research and Technology · doi:10.1016/s2238-7854(12)70029-7 · Cited by 425
Kelly, S. M., & Kampe, S. L. (2004) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-004-0094-8 · Cited by 423
Laser cladding of aerospace materials
Sexton, L., Lavin, S., Byrne, G., & Kennedy, A. (2002) · Journal of Materials Processing Technology · doi:10.1016/s0924-0136(01)01121-9 · Cited by 402
The manufacturing of hard tools from metallic powders by selective laser melting
Abe, F., Osakada, K., Shiomi, M., Uematsu, K., & Matsumoto, M. (2001) · Journal of Materials Processing Technology · doi:10.1016/s0924-0136(01)00522-2 · Cited by 390
Non-beam-based metal additive manufacturing enabled by additive friction stir deposition
Yu, H. Z., Jones, M. E., Brady, G. W., Griffiths, R. J., Garcia, D., Rauch, H. A., Cox, C. D., & Hardwick, N. (2018) · Scripta Materialia · doi:10.1016/j.scriptamat.2018.03.025 · Cited by 361
Experimental investigation of explosive welding of cp-titanium/AISI 304 stainless steel
Akbari Mousavi, S. A. A., & Farhadi Sartangi, P. (2009) · Materials & Design · doi:10.1016/j.matdes.2008.06.016 · Cited by 350
Microstructure and residual stress of laser rapid formed Inconel 718 nickel-base superalloy
Liu, F., Lin, X., Yang, G., Song, M., Chen, J., & Huang, W. (2010) · Optics & Laser Technology · doi:10.1016/j.optlastec.2010.06.015 · Cited by 348
Topology Optimization for Additive Manufacturing
Brackett, D., Ashcroft, I., & Hague, R. (2011) · doi:10.26153/tsw/15300 · Cited by 347
Beese, A. M., & Carroll, B. E. (2015) · JOM · doi:10.1007/s11837-015-1759-z · Cited by 343
Self-citationTanaka, T., Morishige, T., & Hirata, T. (2009) · Scripta Materialia · doi:10.1016/j.scriptamat.2009.06.022 · Cited by 337
Hinojos, A., Mireles, J., Reichardt, A., Frigola, P., Hosemann, P., Murr, L. E., & Wicker, R. B. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.01.041 · Cited by 337
Self-citationFunctionally graded material: an overview
Mahamood, R. M., Akinlabi, E. T., Shukla, M., & Pityana, S. L. (2012) · Research Portal (Queen's University Belfast) · Cited by 332
Wei, K., Gao, M., Wang, Z., & Zeng, X. (2014) · Materials Science and Engineering: A · doi:10.1016/j.msea.2014.05.092 · Cited by 330
Developing Gradient Metal Alloys through Radial Deposition Additive Manufacturing
Hofmann, D. C., Roberts, S., Otis, R., Kolodziejska, J., Dillon, R. P., Suh, J.-O., Shapiro, A. A., Liu, Z.-K., & Borgonia, J.-P. (2014) · Scientific Reports · doi:10.1038/srep05357 · Cited by 314
Self-citationDissimilar welding of AISI 310 austenitic stainless steel to nickel-based alloy Inconel 657
Naffakh, H., Shamanian, M., & Ashrafizadeh, F. (2009) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2008.08.019 · Cited by 303
Microstructural evolution in laser-deposited multilayer Ti-6Al-4V builds: Part II. Thermal modeling
Kelly, S. M., & Kampe, S. L. (2004) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-004-0095-7 · Cited by 302
Selective laser melting of Invar 36: Microstructure and properties
Qiu, C., Adkins, N. J. E., & Attallah, M. M. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.10.020 · Cited by 292
Laser welding of dissimilar metal combinations
Sun, Z., & Ion, J. C. (1995) · Journal of Materials Science · doi:10.1007/bf00361499 · Cited by 291
Murr, L. E., Martinez, E., Gaytan, S. M., Ramirez, D. A., Machado, B. I., Shindo, P. W., Martinez, J. L., Medina, F., Wooten, J., Ciscel, D., et al. (2011) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-011-0748-2 · Cited by 291
Facchini, L., Magalini, E., Robotti, P., & Molinari, A. (2009) · Rapid Prototyping Journal · doi:10.1108/13552540910960262 · Cited by 290
Effects of processing parameters on properties of selective laser melting Mg–9%Al powder mixture
Zhang, B., Liao, H., & Coddet, C. (2012) · Materials & Design · doi:10.1016/j.matdes.2011.06.061 · Cited by 280
Reichardt, A., Dillon, R. P., Borgonia, J. P., Shapiro, A. A., McEnerney, B. W., Momose, T., & Hosemann, P. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.05.016 · Cited by 275
Self-citationInvestigating laser rapid manufacturing for Inconel-625 components
Paul, C. P., Ganesh, P., Mishra, S. K., Bhargava, P., Negi, J., & Nath, A. K. (2007) · Optics & Laser Technology · doi:10.1016/j.optlastec.2006.01.008 · Cited by 274
A Review of Dissimilar Welding Techniques for Magnesium Alloys to Aluminum Alloys
Liu, L., Ren, D., & Liu, F. (2014) · Materials · doi:10.3390/ma7053735 · Cited by 262
Jägle, E., Sheng, Z., Kürnsteiner, P., Ocylok, S., Weisheit, A., & Raabe, D. (2016) · Materials · doi:10.3390/ma10010008 · Cited by 262
Compositionally graded metals: A new frontier of additive manufacturing
Hofmann, D. C., Kolodziejska, J., Roberts, S., Otis, R., Dillon, R. P., Suh, J.-O., Liu, Z.-K., & Borgonia, J.-P. (2014) · Journal of Materials Research · doi:10.1557/jmr.2014.208 · Cited by 255
Self-citationZhong, M., Sun, H., Liu, W., Zhu, X., & He, J. (2005) · Scripta Materialia · doi:10.1016/j.scriptamat.2005.03.047 · Cited by 244
Bataev, I. A., Bataev, A. A., Mali, V. I., & Pavliukova, D. V. (2012) · Materials & Design · doi:10.1016/j.matdes.2011.09.030 · Cited by 227
Facchini, L., Vicente, N., Lonardelli, I., Magalini, E., Robotti, P., & Molinari, A. (2010) · Advanced Engineering Materials · doi:10.1002/adem.200900259 · Cited by 218
Laser deposition of compositionally graded titanium–vanadium and titanium–molybdenum alloys
Collins, P. C., Banerjee, R., Banerjee, S., & Fraser, H. L. (2003) · Materials Science and Engineering A · doi:10.1016/s0921-5093(02)00909-7 · Cited by 214
Joining of titanium to 304L stainless steel by friction welding
Dey, H. C., Ashfaq, M., Bhaduri, A. K., & Rao, K. P. (2009) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2009.06.018 · Cited by 214
OpenCalphad - a free thermodynamic software
Sundman, B., Kattner, U. R., Palumbo, M., & Fries, S. G. (2015) · Integrating materials and manufacturing innovation · doi:10.1186/s40192-014-0029-1 · Cited by 193
FEM modeling and experimental verification for dilution control in laser cladding
Hofman, J. T., de Lange, D. F., Pathiraj, B., & Meijer, J. (2011) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2010.09.007 · Cited by 190
Property evaluation of 304L stainless steel fabricated by selective laser melting
Abd‐Elghany, K., & Bourell, D. L. (2012) · Rapid Prototyping Journal · doi:10.1108/13552541211250418 · Cited by 187
Stainless steel to titanium bimetallic structure using LENS™
Sahasrabudhe, H., Harrison, R., Carpenter, C. B., & Bandyopadhyay, A. K. (2014) · Additive manufacturing · doi:10.1016/j.addma.2014.10.002 · Cited by 178
Additive manufacturing for aerospace flight applications
Shapiro, A. A., Borgonia, J. P., Chen, Q. N., Dillon, R. P., McEnerney, B., Polit-Casillas, R., & Soloway, L. (2016) · Journal of Spacecraft and Rockets · doi:10.2514/1.a33544 · Cited by 178
Self-citationpycalphad: CALPHAD-based Computational Thermodynamics in Python
Otis, R., & Liu, Z.-K. (2017) · Journal of Open Research Software · doi:10.5334/jors.140 · Cited by 163
Self-citationMicrostructural evolution and high temperature failure of ferritic to austenitic dissimilar welds
DuPont, J. N. (2012) · International Materials Reviews · doi:10.1179/1743280412y.0000000006 · Cited by 162
Process development for the manufacturing of 99.94% pure copper via selective electron beam melting
Lodes, M. A., Guschlbauer, R., & Körner, C. (2014) · Materials Letters · doi:10.1016/j.matlet.2014.12.105 · Cited by 161
Prediction of melt pool depth and dilution in laser powder deposition
Fathi, A., Toyserkani, E., Khajepour, A., & Durali, M. (2006) · Journal of Physics D: Applied Physics · doi:10.1088/0022-3727/39/12/022 · Cited by 159
Muller, P., Mognol, P., & Hascoët, J.-Y. (2012) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2012.11.020 · Cited by 156
Development of nickel‐titanium graded composition components
Domack, M. S., & Baughman, J. M. (2005) · Rapid Prototyping Journal · doi:10.1108/13552540510573383 · Cited by 147
Study of the Pore Formation on CoCrMo Alloys by Selective Laser Melting Manufacturing Process
Monroy, K. P., Delgado, J., & Ciurana, J. (2013) · Procedia Engineering · doi:10.1016/j.proeng.2013.08.227 · Cited by 147
Thermodynamic and kinetic modeling of the Cr-Ti-V system
Ghosh, G. K. (2002) · Journal of Phase Equilibria and Diffusion · doi:10.1361/105497102770331569 · Cited by 146
Diffusion bonding of 410 stainless steel to copper using a nickel interlayer
Sabetghadam, H., Zarei‐Hanzaki, A., & Araee, A. (2010) · Materials Characterization · doi:10.1016/j.matchar.2010.03.006 · Cited by 142
Bi, G., Sun, C., Chen, H.-C., Ng, F. L., & Khin, C. C. (2014) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2014.04.020 · Cited by 135
Bobbio, L. D., Bocklund, B. J., Otis, R., Borgonia, J. P., Dillon, R. P., Shapiro, A. A., McEnerney, B. W., Liu, Z., & Beese, A. M. (2018) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2018.01.156 · Cited by 135
Self-citationDissimilar ultrasonic spot welding of aerospace aluminum alloy AA2139 to titanium alloy TiAl6V4
Zhang, C., Robson, J. D., & Prangnell, P. B. (2016) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2016.01.008 · Cited by 109
Microstructural evolution of AISI 4340 steel during Direct Metal Deposition process
Bhattacharya, S., Dinda, G. P., Dasgupta, A. K., & Mazumder, J. (2010) · Materials Science and Engineering A · doi:10.1016/j.msea.2010.11.036 · Cited by 108
Imran, M. K., Masood, S. H., Brandt, M., Bhattacharya, S., & Mazumder, J. (2011) · Materials Science and Engineering A · doi:10.1016/j.msea.2010.12.099 · Cited by 106
Zuo, D., Hu, S., Shen, J., & Xue, Z. (2014) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2014.02.004 · Cited by 103
Diffusion bonding titanium to stainless steel using Nb/Cu/Ni multi-interlayer
Li, P., Li, J., Xiong, J., Zhang, F., & Raza, S. H. (2012) · Materials Characterization · doi:10.1016/j.matchar.2012.03.016 · Cited by 103
Laser melting functionally graded composition of Waspaloy® and Zirconia powders
Mumtaz, K., & Hopkinson, N. (2007) · Journal of Materials Science · doi:10.1007/s10853-007-1661-3 · Cited by 103
Microstructural control during direct laser deposition of a β-titanium alloy
Qiu, C., Ravi, G. A., & Attallah, M. M. (2015) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2015.05.031 · Cited by 92
Liang, Y.-J., Liu, D., & Wang, H. (2013) · Scripta Materialia · doi:10.1016/j.scriptamat.2013.11.002 · Cited by 85
Laha, K., Chandravathi, K. S., Rao, K. B. S., Mannan, S. L., & Sastry, D. H. (2001) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-001-0107-9 · Cited by 79
Formation of Nanocrystalline Tungsten by Selective Laser Melting of Tungsten Powder
Zhang, D., Cai, Q., & Liu, J. (2012) · Materials and Manufacturing Processes · doi:10.1080/10426914.2012.663119 · Cited by 77
Direct laser fabrication of three dimensional components using SC420 stainless steel
Ravi, G. A., Hao, X., Wain, N., Wu, X., & Attallah, M. M. (2013) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2012.12.062 · Cited by 74
Microstructure and mechanical properties of a graded structural material
Ren, H. S., Liu, D., Tang, H., Tian, X., Zhu, Y. Y., & Wang, H. M. (2014) · Materials Science and Engineering A · doi:10.1016/j.msea.2014.06.016 · Cited by 70
Combinatorial Alloy Design by Laser Additive Manufacturing
Knoll, H., Ocylok, S., Weisheit, A., Springer, H., Jägle, E. A., & Raabe, D. (2016) · steel research international · doi:10.1002/srin.201600416 · Cited by 70
Shah, L. H. A., Gerlich, A. P., & Zhou, Y. (2017) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-017-1038-y · Cited by 64
Terrazas, C. A., Mireles, J., Gaytan, S. M., Morton, P. A., Hinojos, A., Frigola, P., & Wicker, R. B. (2015) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-015-7767-x · Cited by 61
Developing diffusion bonding windows for joining AZ31B magnesium and copper alloys
Mahendran, G., Balasubramanian, V., & Senthilvelan, T. (2008) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-008-1645-8 · Cited by 49
Study on the dissimilar magnesium alloy and copper lap joint by TIG welding
Liming, L., Shengxi, W., & Limin, Z. (2007) · Materials Science and Engineering A · doi:10.1016/j.msea.2007.04.089 · Cited by 41
Computational Design of Gradient Paths in Additively Manufactured Functionally Graded Materials
Kirk, T., Galvan, E., Malak, R., & Arróyave, R. (2018) · Journal of Mechanical Design · doi:10.1115/1.4040816 · Cited by 40
Li, L., Syed, W. U. H., & Pinkerton, A. J. (2006) · Virtual and Physical Prototyping · doi:10.1080/17452750601141523 · Cited by 39
Moustafa, A. R., Dinwiddie, R. B., Pawlowski, A. E., Splitter, D. A., Shyam, A., & Cordero, Z. C. (2018) · Additive manufacturing · doi:10.1016/j.addma.2018.05.018 · Cited by 39
Kundu, S., Anand, G., & Chatterjee, S. (2012) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-012-1553-2 · Cited by 26
Dissimilar copper-aluminum joint processed by low-temperature nickel electroplating
Yang, Y., Chen, H., & Li, M. (2016) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2016.11.025 · Cited by 25
Fabrication of X-Graded H13 and Cu Powder Mix Using High Power Pulsed Nd:YAG Laser
Beal, V. E., Erasenthiran, P., Hopkinson, N., Dickens, P., & Ahrens, C. H. (2004) · doi:10.26153/tsw/6970 · Cited by 17
Cited by
Metal additive manufacturing in aerospace: A review
Blakey-Milner, B., Gradl, P., Snedden, G., Brooks, M., Pitot, J., Lopez, E., Leary, M., Berto, F., & du Plessis, A. (2021) · Materials & Design · doi:10.1016/j.matdes.2021.110008 · Cited by 2,263
Material-structure-performance integrated laser-metal additive manufacturing
Gu, D., Shi, X., Poprawe, R., Bourell, D. L., Setchi, R., & Zhu, J. (2021) · Science · doi:10.1126/science.abg1487 · Cited by 1,703
Methods and materials for additive manufacturing: A critical review on advancements and challenges
Bhuvanesh Kumar, M., & Sathiya, P. (2021) · Thin-Walled Structures · doi:10.1016/j.tws.2020.107228 · Cited by 372
A review of various materials for additive manufacturing: Recent trends and processing issues
Srivastava, M., Rathee, S., Patel, V., Kumar, A., & Koppad, P. G. (2022) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2022.10.015 · Cited by 311
Mukherjee, T., Elmer, J. W., Wei, H. L., Lienert, T. J., Zhang, W., Kou, S., & DebRoy, T. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2023.101153 · Cited by 267
Metadata
- Authors
- Reichardt, A., Shapiro, A. A., Otis, R., Dillon, R. P., Borgonia, J. P., McEnerney, B. W., Hosemann, P., & Beese, A. M.
- Venue
- International Materials Reviews
- Publisher
- SAGE Publications
- Published
- 2020-01-09
- Volume
- 66
- Issue
- 1
- Pages
- 1-29
- ISSN
- 0950-6608 (ISSN-L)
- 1743-2804
- OpenAlex
- W2999792902
- Cited by
- 334
- References
- 95
- FWCI
- 19.22
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.