The DOI matches its Crossref record.
Property evaluation of 304L stainless steel fabricated by selective laser melting
Abstract
Purpose: Additive manufacturing raw material cost has been recently confirmed as a significant obstacle to widespread deployment of these technologies in industry. Aiming at reducing the cost of the selective laser melting (SLM) process, the purpose of this paper is to evaluate the different properties of products fabricated by SLM using low‐cost ($10/Kg) feedstock 304L stainless steel powders. The entire process cost was also evaluated. Design/methodology/approach: Using an experimental approach, 24 samples with different shapes and sizes were fabricated with layer thickness of 30, 50 and 70 μm and laser scanning speed set at 70 and 90 mm/s. Part geometry, dimensional tolerance, surface quality, density, mechanical properties and microstructure were evaluated. Findings: Results confirmed that the SLM of low‐cost 304L powder was successful and could produce functional parts with fine details and small wall thickness. Using small layer thickness and low scanning speed improved the properties by more than 20 per cent. At a layer thickness of 30 μm and speed of 70 mm/s, density was 92 per cent and hardness was 190 HV. At layer thickness of 70 μm porosity increases and cracks started to form which decreased strength and ductility. The steel remained austenitic with no carbide films at grain boundaries due to the high melting and cooling cycles. Research limitations/implications: This research was limited to 304L powders. Future work should be done on different materials and should include the effect of post processing heat treatment on improving the mechanical properties and microstructure. Practical implications: The cost of the SLM process using feedstock powders was less than 10per cent of the cost of using the special powders from a machine manufacturer with almost no effect on product quality. Originality/value: The paper describes how cost reduction in the SLM process was achieved by using 304L powder.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Additive manufacturing of metallic components – Process, structure and properties
DebRoy, T., Wei, H. L., Zuback, J. S., Mukherjee, T., Elmer, J. W., Milewski, J. O., Beese, A. M., Wilson-Heid, A., De, A., & Zhang, W. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.10.001 · Cited by 8,805
Additive manufacturing of metals
Herzog, D., Seyda, V., Wycisk, E., & Emmelmann, C. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.07.019 · Cited by 4,759
Review of selective laser melting: Materials and applications
Yap, C. Y., Chua, C. K., Dong, Z. L., Liu, Z. H., Zhang, D. Q., Loh, L. E., & Sing, S. L. (2015) · Applied Physics Reviews · doi:10.1063/1.4935926 · Cited by 2,353
Steels in additive manufacturing: A review of their microstructure and properties
Bajaj, P., Hariharan, A., Kini, A., Kürnsteiner, P., Raabe, D., & Jägle, E. A. (2020) · Materials Science and Engineering: A · doi:10.1016/j.msea.2019.138633 · Cited by 1,020
Invited review article: Strategies and processes for high quality wire arc additive manufacturing
Cunningham, C. R., Flynn, J. M., Shokrani, A., Dhokia, V., & Newman, S. T. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2018.06.020 · Cited by 820
Metadata
- Authors
- Abd‐Elghany, K., & Bourell, D. L.
- Venue
- Rapid Prototyping Journal
- Publisher
- Emerald
- Published
- 2012-07-27
- Volume
- 18
- Issue
- 5
- Pages
- 420-428
- ISSN
- 1355-2546 (ISSN-L)
- OpenAlex
- W2012777006
- Cited by
- 187
- References
- 0
- FWCI
- 4.41
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Property evaluation of 304L stainless steel fabricated by selective laser melting. https://app.cochat.ai/papers/10.1108/13552541211250418
- The paper
- Abd‐Elghany, K., & Bourell, D. L. (2012). Property evaluation of 304L stainless steel fabricated by selective laser melting. Rapid Prototyping Journal. https://doi.org/10.1108/13552541211250418
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.