The DOI matches its Crossref record; 9 of the 9 references it cites were found in a registry or an index.
The impact of additive manufacturing in the aircraft spare parts supply chain: supply chain operation reference (scor) model based analysis
Abstract
Additive manufacturing (AM) technology has the potential to significantly improve supply chain dynamics, reduce shipping costs and shorten delivery lead times. Using AM technology, manufacturers can produce parts on demand and thus reduce the need of maintaining safety inventory. This is especially useful in the aircraft spare parts industry where currently there is a need to maintain a high level of safety inventory for high-cost long-lead time metallic parts. Therefore, more and more companies in the aerospace industry are interested in using AM technology. There are different approaches to configure the aircraft spare parts supply chain using AM technology. This paper evaluates the impact of AM in the aircraft spare parts supply chain based on the well-known supply chain operation reference model. Three supply chain scenarios are investigated; namely, conventional (as-is) supply chain, centralized AM supply chain and distributed AM supply chain. A case study is conducted based on data obtained in the literature. The result shows that the use of AM will bring various opportunities for reducing the required safety inventory of aircraft spare parts in the supply chain. A sensitivity analysis is performed and some key factors affecting the choice of AM scenarios are studied.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Rapid manufacturing in the spare parts supply chain: Alternative approaches to capacity deployment
Holmström, J., Partanen, J., Tuomi, J., & Walter, M. (2010) · Journal of Manufacturing Technology Management · doi:10.1108/17410381011063996 · Cited by 431
Computer-assisted supply chain configuration based on supply chain operations reference (SCOR) model
Huang, S. H., Sheoran, S. K., & Keskar, H. (2005) · Computers & Industrial Engineering · doi:10.1016/j.cie.2005.01.001 · Cited by 278
Self-citationTOWILL, D. R. (1991) · International Journal of Computer Integrated Manufacturing · doi:10.1080/09511929108944496 · Cited by 208
Baumers, M., Tuck, C., Bourell, D. L., Sreenivasan, R., & Hague, R. (2011) · Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture · doi:10.1177/0954405411406044 · Cited by 180
Supply Chain Integration and the SCOR Model
Zhou, H., Benton, W. C., Schilling, D. A., & Milligan, G. W. (2011) · Journal of Business Logistics · doi:10.1111/j.0000-0000.2011.01029.x · Cited by 139
Self-citationRapid manufacturing: impact on supply chain methodologies and practice
Tuck, C. J., Hague, R., & Burns, N. D. (2006) · International Journal of Services and Operations Management · doi:10.1504/ijsom.2007.011459 · Cited by 130
Safeguarding supply chain relationships
Christy, D. P., & Grout, J. R. (1994) · International Journal of Production Economics · doi:10.1016/0925-5273(94)00024-7 · Cited by 105
Coordinated control of manufacturing/supply chains using multi-level techniques
Tzafestaş, S. G., & Kapsiotis, G. (1994) · Computer Integrated Manufacturing Systems · doi:10.1016/0951-5240(94)90039-6 · Cited by 83
A framework for modelling business processes in demand-driven supply chains
Verdouw, C. N., Beulens, A. J. M., Trienekens, J. H., & van der Vorst, J. G. A. J. (2010) · Production Planning & Control · doi:10.1080/09537287.2010.486384 · Cited by 62
Cited by
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
Ngo, T. D., Kashani, A., Imbalzano, G., Nguyen, K. T. Q., & Hui, D. (2018) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.02.012 · Cited by 8,431
Metal additive manufacturing in the commercial aviation industry: A review
Gisario, A., Kazarian, M., Martina, F., & Mehrpouya, M. (2019) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2019.08.005 · Cited by 574
Blockchain in Additive Manufacturing and its Impact on Supply Chains
Kurpjuweit, S., Schmidt, C. G., Klöckner, M., & Wagner, S. M. (2021) · Journal of Business Logistics · doi:10.1111/jbl.12231 · Cited by 305
Smart production planning and control in the Industry 4.0 context: A systematic literature review
Bueno, A., Godinho Filho, M., & Frank, A. G. (2020) · Computers & Industrial Engineering · doi:10.1016/j.cie.2020.106774 · Cited by 294
Additive manufacturing and supply chains–a systematic review
Kunovjanek, M., Knofius, N., & Reiner, G. (2022) · Production Planning & Control · doi:10.1080/09537287.2020.1857874 · Cited by 149
Metadata
- Authors
- Liu, P., Huang, S. H., Mokasdar, A., Zhou, H., & Hou, L.
- Venue
- Production Planning & Control
- Publisher
- Informa UK Limited
- Published
- 2013-06-20
- Volume
- 25
- Issue
- 13-14
- Pages
- 1169-1181
- ISSN
- 0953-7287 (ISSN-L)
- 1366-5871
- OpenAlex
- W1971260403
- Cited by
- 265
- References
- 9
- FWCI
- 12.15
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: The impact of additive manufacturing in the aircraft spare parts supply chain: supply chain operation reference (scor) model based analysis. https://app.cochat.ai/papers/10.1080/09537287.2013.808835
- The paper
- Liu, P., Huang, S. H., Mokasdar, A., Zhou, H., & Hou, L. (2014). The impact of additive manufacturing in the aircraft spare parts supply chain: supply chain operation reference (scor) model based analysis. Production Planning & Control. https://doi.org/10.1080/09537287.2013.808835
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.