Adsorption capacity comparison between graphene oxide and graphene nanoplatelets for the removal of coloured textile dyes from wastewater
The DOI matches its Crossref record; 34 of the 37 references it cites were found in a registry or an index.
Abstract
The synthesis of graphene oxide (GO) nanosheets, to be used as an adsorbent for the removal of textile dyes from wastewater, was optimized by the modified Hummers method. The GO nanosheets produced were compared with commercial graphene and characterized by X-ray diffractometry (XRD), Raman spectroscopy, specific surface area analysis, and zero-charge point (pHpcz). Both GO and graphene nanomaterials were originally used to adsorb two coloured dyes (direct red 81 and Indosol SFGL direct blue), which are commonly disposed in textile industrial effluents. Adsorptive assays were performed to determine and compare the variables that most influence the process, such as pH and dye concentration. The mechanisms of adsorption are proposed based on the strong interactions between the graphene oxide (due to its high functionalization with hydroxyl and carboxylic groups) and the active functional groups of the dyes (according to its colour) that, in general, overcome the weaker electrostatic forces between water/commercial graphene/dye systems.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
1 retracted
Moradi, O., Gupta, V. K., Agarwal, S., Tyagi, I., Asif, M., Hamdy, A. S., Sadegh, H., & Shahryari-ghoshekandi, R. (2015) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2015.03.005 · Cited by 77 · cited 2×
“The presence of traces of polar and reactive groups may be important to promote interaction and compatibility with polar solvents [6].”
BackgroundRetractedGeim, A. K., & Novoselov, K. S. (2007) · Nature Materials · doi:10.1038/nmat1849 · Cited by 39,979 · cited 2×
“With the isolation of graphene in 2004, by Geim and Novoselov [7], it is possible to combine a new and efficient nanomaterial adsorbent”
MethodPreparation of Graphitic Oxide
Hummers, W. S., & Offeman, R. E. (1958) · Journal of the American Chemical Society · doi:10.1021/ja01539a017 · Cited by 29,920 · cited 4×
“is the modified Hummers’ [9,10], because it is considered efficient and it has a shorter reaction time [11], optimizing the quantity and types of oxidants used, according to”
InfluentialRaman Spectrum of Graphene and Graphene Layers
Ferrari, A. C., Meyer, J. C., Scardaci, V., Casiraghi, C., Lazzeri, M., Mauri, F., Piscanec, S., Jiang, D., Novoselov, K. S., Roth, S., et al. (2006) · Physical Review Letters · doi:10.1103/physrevlett.97.187401 · Cited by 15,047 · cited 1×
“Band D is due to Raman scattering in the discontinuity zone, which reflects disordered structures [25].”
BackgroundInsights into the modeling of adsorption isotherm systems
Foo, K. Y., & Hameed, B. H. (2010) · Chemical Engineering Journal · doi:10.1016/j.cej.2009.09.013 · Cited by 8,479 · cited 2×
“The multilayer behaviour can be represented by BET model, Equation (5) [20], where qe (mg/g) is the equilibrium amount adsorbed, qm (mg/g) is the maximum adsorption in the monolayer, d is the number of layers, K is the adsorption equilibrium constant and x = Ce/C0 is the ratio between the equilibrium concentration and…”
MethodInfluentialOn a theory of the van der waals adsorption of gases
Brunauer, S., Deming, L. S., Deming, W. E., & Teller, E. (1940) · Journal of the American Chemical Society · doi:10.1021/ja01864a025 · Cited by 4,829 · cited 1×
“The profile behaviour (trend curves in Figure 7(a)) indicates an adsorption isotherm of type II [19], established by a multilayer coating.”
BackgroundMonitoring dopants by Raman scattering in an electrochemically top-gated graphene transistor
Das, A., Pisana, S., Chakraborty, B., Piscanec, S., Saha, S. K., Waghmare, U. V., Novoselov, K. S., Krishnamurthy, H. R., Geim, A. K., Ferrari, A. C., et al. (2008) · Nature Nanotechnology · doi:10.1038/nnano.2008.67 · Cited by 3,621 · cited 1×
“Such structure includes the number of layers and degrees of crystallinity [26].”
BackgroundGraphene Oxide Dispersions in Organic Solvents
Paredes, J. I., Villar-Rodil, S., Martínez-Alonso, A., & Tascón, J. M. D. (2008) · Langmuir · doi:10.1021/la801744a · Cited by 2,804 · cited 1×
“provided by the conversion of graphite to oxide by chemical means, which, because it is a strongly oxygenated layered material [8], can be exfoliated in aqueous”
MethodAn improved Hummers method for eco-friendly synthesis of graphene oxide
Chen, J., Yao, B., Li, C., & Shi, G. (2013) · Carbon · doi:10.1016/j.carbon.2013.07.055 · Cited by 2,342
Synthesis of Graphene and Its Applications: A Review
Choi, W., Lahiri, I., Seelaboyina, R., & Kang, Y. S. (2010) · Critical Reviews in Solid State and Materials Sciences · doi:10.1080/10408430903505036 · Cited by 1,755 · cited 1×
“Raman Spectroscopy was used to identify the disorder of the crystalline structure in the carbon materials [14].”
Method
Research works printed but not linked: 3
- Yu C, 2016, Sci Rep, 6
- Shahriary L, 2014, Int J Renew Energy Environ Eng, 2, 58
- Oliveira EHC., 2016, Utilização de nanomateriais de grafite para adsorção de corantes têxteis aniônicos [PhD Thesis]
Cited by
Recent advances on the removal of dyes from wastewater using various adsorbents: a critical review
Dutta, S., Gupta, B., Srivastava, S. K., & Gupta, A. K. (2021) · Materials Advances · doi:10.1039/d1ma00354b · Cited by 1,296
Kallawar, G. A., & Bhanvase, B. A. (2023) · Environmental Science and Pollution Research · doi:10.1007/s11356-023-31175-3 · Cited by 181
Graphene oxide and its chemical nature: Multi-stage interactions between the oxygen and graphene
Nebol'sin, V. A., Galstyan, V., & Silina, Y. E. (2020) · Surfaces and Interfaces · doi:10.1016/j.surfin.2020.100763 · Cited by 109
The Application of Modified Natural Polymers in Toxicant Dye Compounds Wastewater: A Review
Ishak, S. A., Murshed, M. F., Akil, H. M., Ismail, N., Rasib, S. Z. M., & Al-Gheethi, A. A. S. (2020) · Water · doi:10.3390/w12072032 · Cited by 107
“A previous study claimed that the higher surface area assisted the graphene oxide’s ability to interact with direct blue Indosol dyes (a subcategory of anionic dyes) at pH < 4, due to several factors, such as the presence of hydroxyl, carboxylic, and oxygen groups, as well as the active sites on the dye particles, whi…”
BackgroundGraphene-based materials for the adsorptive removal of uranium in aqueous solutions
Verma, S., & Kim, K. (2021) · Environment International · doi:10.1016/j.envint.2021.106944 · Cited by 94
Metadata
- Authors
- de Assis, L. K., Damasceno, B. S., Carvalho, M. N., Oliveira, E. H. C., & Ghislandi, M. G.
- Affiliations
- Unidade Acadêmica do Cabo de Santo Agostinho (UACSA), Universidade Federal Rural de Pernambuco, Cabo de Santo Agostinho, Brazil
- Universidade Federal de Pernambuco (BR)
- Universidade Federal Rural de Pernambuco (BR)
- Corresponding author
- Ghislandi, Marcos G.
- Venue
- Environmental Technology
- Publisher
- Informa UK Limited
- Published
- 2019-01-17
- Volume
- 41
- Issue
- 18
- Pages
- 2360-2371
- ISSN
- 0959-3330 (ISSN-L)
- 1479-487X
- OpenAlex
- W2909252647
- Cited by
- 52
- References
- 37
- Citations by year
- 2026: 2 · 2025: 4 · 2024: 6 · 2023: 18 · 2022: 6 · 2021: 9 · 2020: 5 · 2019: 2
- FWCI
- 1.99
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Environmental Technology (publishedVersion)
- PubMed (publishedVersion)
- Topics
- Physical Sciences › Environmental Science › Water Science and Technology › Adsorption and biosorption for pollutant removal
- Physical Sciences › Materials Science › Materials Chemistry › Graphene research and applications
- Physical Sciences › Environmental Science › Water Science and Technology › Coagulation and Flocculation Studies
- Keywords
- graphene oxide, graphene nanoplatelets, adsorption, textile dyes, dye removal, wastewater treatment, modified Hummers method, Direct Red 81, adsorption mechanism, pH effect, dye concentration, adsorbent preparation
- MeSH terms
- Adsorption, Coloring Agents, Graphite, Kinetics, Textiles, Water Pollutants, Chemical, Wastewater
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Adsorption capacity comparison between graphene oxide and graphene nanoplatelets for the removal of coloured textile dyes from wastewater. https://app.cochat.ai/papers/10.1080/09593330.2019.1567603
- The paper
- de Assis, L. K., Damasceno, B. S., Carvalho, M. N., Oliveira, E. H. C., & Ghislandi, M. G. (2020). Adsorption capacity comparison between graphene oxide and graphene nanoplatelets for the removal of coloured textile dyes from wastewater. Environmental Technology. https://doi.org/10.1080/09593330.2019.1567603
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.