The DOI matches its Crossref record; 18 of the 18 references it cites were found in a registry or an index.
A Friction Model of Partial-EHL Contacts and its Application to Power Loss in Spur Gears
Abstract
The major power losses in spur gears due to sliding and rolling friction have been analyzed by applying a simplified analytical friction model in the partial-elastohydrodynamic contacts where the friction is affected by both asperity interactions and hydrodynamic effects. Results based on this friction model suggest that the variations in both surface roughness and coefficient of asperity friction alter the traction coefficient appreciably. Reduction of the traction coefficient can improve the efficiency of gears.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Contact of nominally flat surfaces
Greenwood, J. A., & Williamson, J. B. P. (1966) · Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences · doi:10.1098/rspa.1966.0242 · Cited by 5,692
Patir, N., & Cheng, H. S. (1978) · Journal of Lubrication Technology · doi:10.1115/1.3453103 · Cited by 2,305
Self-citationThe Contact of Two Nominally Flat Rough Surfaces
Greenwood, J. A., & Tripp, J. H. (1970) · Proceedings of the Institution of Mechanical Engineers · doi:10.1243/pime_proc_1970_185_069_02 · Cited by 1,754
Isothermal Elastohydrodynamic Lubrication of Point Contacts: Part III—Fully Flooded Results
Hamrock, B. J., & Dowson, D. (1977) · Journal of Lubrication Technology · doi:10.1115/1.3453074 · Cited by 1,183
Moving sources of heat and the temperature at sliding contacts
Jaeger, J. C. (1943) · Journal and proceedings of the Royal Society of New South Wales · doi:10.5962/p.360338 · Cited by 1,157
Blok, H. (1937) · Medical Entomology and Zoology · Cited by 436
Buckingham, E. (1949) · Medical Entomology and Zoology · Cited by 417
A Rheological Model for Elastohydrodynamic Contacts Based on Primary Laboratory Data
Bair, S., & Winer, W. O. (1979) · Journal of Lubrication Technology · doi:10.1115/1.3453342 · Cited by 360
Crook, A. W. (1958) · Philosophical Transactions of the Royal Society of London. Series A, Mathematical and Physical Sciences · doi:10.1098/rsta.1958.0001 · Cited by 174
The lubrication of rollers IV. Measurements of friction and effective viscosity
Crook, A. W. (1963) · Philosophical Transactions of the Royal Society of London Series A Mathematical and Physical Sciences · doi:10.1098/rsta.1963.0005 · Cited by 157
Research works printed but not linked: 13
- Hsu S, 1984, Progress Report of Trib. Project of ECUT Program, 9
- Nemlekar N, 1980, Proc. of Symp. on Surface Roughness Effects in Hydrodynamic and Mixed Lubrication, 173
- Merritt H, 1972, Gear Engineering, 345
- Shipley E, 1962, Gear Handbook
- Chiu Y, 1975, ASME Paper, 75
- Anderson N, 1979, NASA, 1622
- Matsumoto S., 1985, Proc. of the Internat. Trib. Conf., 1165
- Wu. S., 1990, Friction and Wear Modeling in Gears
- Bair N., 1979, Jour. of Lubr. Tech., 101
- Patir N., 1978, Elastohydrodynamics and Related Topics—Proc. of the 5th Leeds-Lyon Symp. on Lubr., 15
- Blok H., 1937, Proc. of the General Discussion on Lubrication and Lubricants, 222
- Blok H., 1970, Interdisciplinary Approach to the Lubrication, 153
- Jaeger J, 1942, Jour and Proc. of the Roy. Soc. of NSW, 76, 203
Cited by
Prediction of Mechanical Efficiency of Parallel-Axis Gear Pairs
Xu, H., Kahraman, A., Anderson, N. E., & Maddock, D. G. (2007) · Journal of Mechanical Design · doi:10.1115/1.2359478 · Cited by 323
Survey of nonlinear vibration of gear transmission systems
Wang, J., and, R. L., & Peng, X. (2003) · Applied Mechanics Reviews · doi:10.1115/1.1555660 · Cited by 232
An Experimental Investigation of Spur Gear Efficiency
Petry-Johnson, T. T., Kahraman, A., Anderson, N. E., & Chase, D. R. (2008) · Journal of Mechanical Design · doi:10.1115/1.2898876 · Cited by 205
“Rough-surface EHL models were used by Wu and Cheng [ 14 ], Mihalidis et al [15] and more recently by Xu et al [16].”
BackgroundMethodLi, S., & Kahraman, A. (2010) · Tribology Transactions · doi:10.1080/10402000903502279 · Cited by 149
“( 10 ) ; Wu and Cheng ( 20 ) ), the power loss due to the rolling action was conventionally computed by using an approximate rolling traction formula for line contacts (Goksem and Hargreaves ( 21 ) ): where the nondimensional parameters <inline-graphic xmlns:xlink="http://www.”
MethodOil Churning Power Losses of a Gear Pair: Experiments and Model Validation
Seetharaman, S., Kahraman, A., Moorhead, M. D., & Petry-Johnson, T. T. (2009) · Journal of Tribology · doi:10.1115/1.3085942 · Cited by 156
Metadata
- Authors
- Wu, S., & Cheng, H. S.
- Affiliations
- Northwestern University (US)
- ORCID
- Cheng, H. S.
- Venue
- Tribology Transactions
- Publisher
- Informa UK Limited
- Published
- 1991-01
- Volume
- 34
- Issue
- 3
- Pages
- 398-407
- ISSN
- 1040-2004 (ISSN-L)
- 1547-397X
- OpenAlex
- W2159414503
- Cited by
- 83
- References
- 18
- Citations by year
- 2026: 3 · 2025: 3 · 2024: 4 · 2023: 1 · 2022: 5 · 2021: 7 · 2020: 3 · 2019: 1 · 2018: 4 · 2017: 5 · 2016: 3 · 2015: 3 · 2014: 6 · 2013: 2 · 2012: 3
- FWCI
- 2.21
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Tribology Transactions (publishedVersion)
- Funders
- U.S. Department of Energy
- National Institute of Standards and Technology
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Gear and Bearing Dynamics Analysis
- Physical Sciences › Engineering › Mechanical Engineering › Tribology and Lubrication Engineering
- Physical Sciences › Engineering › Mechanics of Materials › Adhesion, Friction, and Surface Interactions
- Keywords
- elastohydrodynamic lubrication, partial contact, friction modeling, spur gears, power losses, sliding friction, rolling friction, asperity interaction, surface roughness, traction coefficient, gear efficiency
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A Friction Model of Partial-EHL Contacts and its Application to Power Loss in Spur Gears. https://app.cochat.ai/papers/10.1080/10402009108982050
- The paper
- Wu, S., & Cheng, H. S. (1991). A Friction Model of Partial-EHL Contacts and its Application to Power Loss in Spur Gears. Tribology Transactions. https://doi.org/10.1080/10402009108982050
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.