Experimental study on mechanical drilling of carbon/epoxy composite-Ti6Al4V stacks
The DOI matches its Crossref record; 32 of the 32 references it cites were found in a registry or an index.
Abstract
This paper concerns the experimental studies on the drilling process of multilayer carbon/epoxy composite-Ti6Al4V stacks and their individual material layers using tungsten carbide drills. The significance of the current work aims to reveal the impact of tool wear on the drilling process for CFRP/Ti6Al4V, CFRP and Ti6Al4V. Four groups of machining tests including drilling individual CFRP, individual Ti6Al4V, multilayer CFRP/Ti6Al4V stacks with and without a cooling treatment were conducted. Drilling forces, cutting temperatures and hole quality attributes were experimentally investigated in terms of the drill wear extents. The mechanism controlling the tool wear effect on the drilling machinability of CFRP/Ti6Al4V was revealed, providing several implications for the industrial manufacturers. The results highlight the significant impact of the titanium chip ejection on the composite surface quality and the necessity of a rigorous tool wear control to guarantee the damage-free drilling of CFRP/Ti6Al4V stacks.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Because the effect of various cutting conditions on hole damage, dimensional hole accuracy, and hole quality when machining CFRP/Ti alloy stacks has been little studied [7-11].”
From Evaluation and multi-criteria optimization of surface roughness, deviation from dimensional accuracy and roundness error in drilling CFRP/Ti6Al4 stacks (2022) · cites this paper as [10]
In the citing paper
“On the other hand, unlike the CFRP layers, the average surface roughness values of the Ti layer remain relatively more consistent [8, 10, 12, 18, 24, 39, 40].”
From Evaluation and multi-criteria optimization of surface roughness, deviation from dimensional accuracy and roundness error in drilling CFRP/Ti6Al4 stacks (2022) · cites this paper as [10]
In the citing paper
“Lower roundness error values were obtained at the lowest cutting speed when drilling through the metallic stack in one go [7, 8, 10, 17, 18, 20, 21, 24, 42].”
From Evaluation and multi-criteria optimization of surface roughness, deviation from dimensional accuracy and roundness error in drilling CFRP/Ti6Al4 stacks (2022) · cites this paper as [10]
In the citing paper
“These re-sults show parallelism with the results of studies on si-milar materials in the literature [8, 10, 13, 18, 24, 39, 40].”
From Evaluation and multi-criteria optimization of surface roughness, deviation from dimensional accuracy and roundness error in drilling CFRP/Ti6Al4 stacks (2022) · cites this paper as [10]
In the citing paper
“Again, a lower deviation from dimensional accuracy values was obtained for both CFRP, and Ti6Al4V components at low feed rate drilling of CFRP/Ti6Al4V mixed metallic stack [7, 8, 10, 17, 18, 20, 21, 24, 42].”
From Evaluation and multi-criteria optimization of surface roughness, deviation from dimensional accuracy and roundness error in drilling CFRP/Ti6Al4 stacks (2022) · cites this paper as [10]
Citations
Cites
Chen, W.-C. (1997) · International Journal of Machine Tools and Manufacture · doi:10.1016/s0890-6955(96)00095-8 · Cited by 752
Cutting edge rounding: An innovative tool wear criterion in drilling CFRP composite laminates
Faraz, A., Biermann, D., & Weinert, K. (2009) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2009.08.002 · Cited by 543
Krishnaraj, V., Prabukarthi, A., Ramanathan, A., Elanghovan, N., Senthil Kumar, M., Zitoune, R., & Davim, J. P. (2012) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2012.01.007 · Cited by 400
Machining of Carbon Fiber Reinforced Plastics/Polymers: A Literature Review
Che, D., Saxena, I., Han, P., Guo, P., & Ehmann, K. F. (2014) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4026526 · Cited by 335
Rawat, S., & Attia, H. (2009) · Wear · doi:10.1016/j.wear.2009.01.031 · Cited by 270
Recent advances in drilling hybrid FRP/Ti composite: A state-of-the-art review
Xu, J., Mkaddem, A., & El Mansori, M. (2016) · Composite Structures · doi:10.1016/j.compstruct.2015.09.028 · Cited by 242
Self-citationTool wear in drilling of composite/titanium stacks using carbide and polycrystalline diamond tools
Park, K.-H., Beal, A., Kim, D. (.-W., Kwon, P., & Lantrip, J. (2011) · Wear · doi:10.1016/j.wear.2011.05.038 · Cited by 236
Tool wear of coated drills in drilling CFRP
Wang, X., Kwon, P. Y., Sturtevant, C., Kim, D. (.-W., & Lantrip, J. (2013) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2012.09.019 · Cited by 231
Gaugel, S., Sripathy, P., Haeger, A., Meinhard, D., Bernthaler, T., Lissek, F., Kaufeld, M., Knoblauch, V., & Schneider, G. (2016) · Composite Structures · doi:10.1016/j.compstruct.2016.08.004 · Cited by 217
Liu, Z., An, Q., Xu, J., Chen, M., & Han, S. (2013) · Wear · doi:10.1016/j.wear.2013.02.001 · Cited by 172
Self-citation
Cited by
Xu, J., Li, C., Chen, M., Mansori, M. E., & Davim, J. P. (2019) · Composite Structures · doi:10.1016/j.compstruct.2019.111708 · Cited by 128
Self-citationNi, C., Zhu, L., & Yang, Z. (2019) · Wear · doi:10.1016/j.wear.2019.203006 · Cited by 104
Optimization of CFRP drilling process: a review
Zhu, W., Fu, H., Li, F., Xu, J., Li, Y., & Bai, F. (2022) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-022-10112-7 · Cited by 77
Self-citationMachinability of Al2024, Al6061, and Al5083 alloys using multi-hole simultaneous drilling approach
Aamir, M., Tolouei‐Rad, M., Giasin, K., & Vafadar, A. (2020) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2020.07.078 · Cited by 76
Investigation of minimum quantity lubrication effects in drilling CFRP/Ti6Al4V stacks
Xu, J., Ji, M., Chen, M., & Ren, F. (2019) · Materials and Manufacturing Processes · doi:10.1080/10426914.2019.1661431 · Cited by 73
Self-citation
Metadata
- Authors
- Xu, J., Zhou, L., Chen, M., & Ren, F.
- Affiliations
- Shanghai Jiao Tong University (CN)
- Shanghai Aerospace Equipments Manufacturer Company Limited, Shanghai, China
- Corresponding author
- Xu, Jinyang
- Venue
- Materials and Manufacturing Processes
- Publisher
- Informa UK Limited
- Published
- 2019-03-27
- Volume
- 34
- Issue
- 7
- Pages
- 715-725
- ISSN
- 1042-6914 (ISSN-L)
- 1532-2475
- OpenAlex
- W2924591655
- Cited by
- 80
- References
- 31
- Citations by year
- 2026: 5 · 2025: 5 · 2024: 10 · 2023: 14 · 2022: 11 · 2021: 12 · 2020: 16 · 2019: 7
- FWCI
- 6.47
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Materials and Manufacturing Processes (publishedVersion)
- Funders
- Shanghai Academy of Spaceflight Technology (SAST2017-060)
- Shanghai Pujiang Program (17PJ1403800)
- National Natural Science Foundation of China (51705319)
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Advanced machining processes and optimization
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Advanced Machining and Optimization Techniques
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Engineering Technology and Methodologies
- Keywords
- carbon fiber reinforced epoxy, Ti-6Al-4V, drilling, tool wear, tungsten carbide drill, drilling force, cutting temperature, hole quality, cooling therapy, machinability
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Experimental study on mechanical drilling of carbon/epoxy composite-Ti6Al4V stacks. https://app.cochat.ai/papers/10.1080/10426914.2019.1594275
- The paper
- Xu, J., Zhou, L., Chen, M., & Ren, F. (2019). Experimental study on mechanical drilling of carbon/epoxy composite-Ti6Al4V stacks. Materials and Manufacturing Processes. https://doi.org/10.1080/10426914.2019.1594275
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.