CoChat

Phytocapping: An Alternative Technology for the Sustainable Management of Landfill Sites

Open access
Lamb, Dane T., Venkatraman, Kartik, Bolan, Nanthi, Ashwath, Nanjappa, Choppala, Girish, Naidu, Ravi · 2014 · Critical Reviews in Environmental Science and Technology
Cited by 73

The DOI matches its Crossref record; 17 of the 17 references it cites were found in a registry or an index.

Abstract

Landfill remains the predominant means of waste disposal throughout the globe. Numerous landfills exist in developed and underdeveloped countries, engineered with contrasting degrees of effectiveness. Modern landfill closure in developed countries involves the conventional capping of waste with materials such as compacted clay or geosynthetic clay liners, typically overlain with other soil materials. Conventional capping technologies are now accepted to be increasingly ineffective in reducing percolation into waste. Cost-effective alternative systems are of increasing interest, including the use of plants to control and limit water entry into waste, otherwise known as “Phytocapping”. Phytocapping reduces percolation through three main mechanisms: (a) canopy interception of rainfall, (b) storage of moisture in the soil layers, and (c) evapotranspiration (i.e., hydraulic lift) of stored water. Phytocapping has been shown to be at least as effective as clay capping in reducing percolation through landfill cover materials, provided site specific conditions are factored into design, and providing many additional benefits, including increased cap stability, reduced erosion of capping materials, reduction of wind-blown dust, enhanced biological diversity, increased opportunity to establish commercial plants, carbon sequestration, and enhanced methane oxidation from microbial communities. Phytocapping has been suggested as having potential in phytoremediation of landfill leachate. The most common phytocapping approach to date is the construction of vegetation assemblages for the purposes of creating natural vegetation nodes. Phytocapping technology can be enhanced by appropriate selection of soil amendments such as biosolids, biochar, compost, or other materials. Appropriate selection of plant species and soil amendment products can enhance methane oxidation in capping soils. There is considerable potential for the use of high biomass energy plants but further work is needed in choosing appropriate plant species that will serve both purposes of site water balance as well as commercial (e.g., timber, bioenergy) and biodiversity needs of the community.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1080/10643389.2012.728823

Cites

17 of 17 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Cited by

See all 73

Metadata

Authors
Lamb, D. T., Venkatraman, K., Bolan, N., Ashwath, N., Choppala, G., & Naidu, R.
Venue
Critical Reviews in Environmental Science and Technology
Published
2014-01
Volume
44
Issue
6
Pages
561-637
ISSN
  • 1064-3389 (ISSN-L)
  • 1547-6537
OpenAlex
W2037149563
Cited by
73
References
17
FWCI
4.38
Type
journal article
Language
en
Open access
green

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.