MECHANICAL DRILLING PROCESSES FOR TITANIUM ALLOYS: A LITERATURE REVIEW
Open accessThe DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
Titanium and its alloys (Ti) are attractive for many applications due to their superior properties. However, they are regarded as hard-to-machine materials. Drilling is an important machining process since it is involved in nearly all Ti applications. It is desirable to develop cost-effective drilling processes for Ti and/or improve the cost-effectiveness of currently-available processes. Such development and improvement will be benefited by a comprehensive literature review of drilling processes for Ti. This paper presents a literature review on mechanical drilling processes for Ti, namely, twist drilling, vibration assisted twist drilling, ultrasonic machining, and rotary ultrasonic machining. It discusses cutting force, cutting temperature, tool wear and tool life, hole quality (diameter and cylindricity, surface roughness, and burr), and chip type when drilling of Ti using these processes.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
New observations on the mechanism of chip formation when machining titanium alloys
Komanduri, R., & Von Turkovich, B. F. (1981) · Wear · doi:10.1016/0043-1648(81)90242-8 · Cited by 405 · cited 1×
“Komanduri and Turkovich (1981) analyzed data from high and low speed tests and explained the catastrophic shear failure mode of chip formation and the influence of process parameters.”
Background
Cited by
A review: drilling performance and hole quality of aluminium alloys for aerospace applications
Aamir, M., Giasin, K., Tolouei-Rad, M., & Vafadar, A. (2020) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2020.09.003 · Cited by 286
Isbilir, O., & Ghassemieh, E. (2013) · Machining Science and Technology · doi:10.1080/10910344.2013.806098 · Cited by 107
“Adhesion is well known characteristic in machining of titanium and reported by Zhang et al. (2008). High chemical affinity of titanium to most of tool materials leads to material transfer on to cutting tools.”
BackgroundInfluentialSun, D., Lemoine, P., Keys, D., Doyle, P., Malinov, S., Zhao, Q., Qin, X., & Jin, Y. (2018) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-016-9850-3 · Cited by 80
Combined effects of various materials on tool wear in drilling of Ti/CFRP stacks
Wang, Q., Wang, F., Zhang, C., & Chen, C. (2020) · Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science · doi:10.1177/0954406219868246 · Cited by 15
“However, titanium alloys are still irreplaceable in some critical load-bearing locations, thus Ti/CFRP stacks structures are formed.(4,5) Since stacks components are usually joined by bolted or riveted, a large number of holes need to be machined on Ti/CFRP stacks, and the quality of the connecting holes will directly…”
BackgroundKourra, N., Warnett, J. M., Attridge, A., Dahnel, A., Ascroft, H., Barnes, S., & Williams, M. A. (2017) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-016-8691-4 · Cited by 11
Metadata
- Authors
- Zhang, P. F., Churi, N. J., Pei, Z. J., & Treadwell, C.
- Venue
- Machining Science and Technology
- Publisher
- Informa UK Limited
- Published
- 2008-12-11
- Volume
- 12
- Issue
- 4
- Pages
- 417-444
- ISSN
- 1091-0344 (ISSN-L)
- 1532-2483
- OpenAlex
- W2087002572
- Cited by
- 134
- References
- 1
- FWCI
- 6.40
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: MECHANICAL DRILLING PROCESSES FOR TITANIUM ALLOYS: A LITERATURE REVIEW. https://app.cochat.ai/papers/10.1080/10910340802519379
- The paper
- Zhang, P. F., Churi, N. J., Pei, Z. J., & Treadwell, C. (2008). MECHANICAL DRILLING PROCESSES FOR TITANIUM ALLOYS: A LITERATURE REVIEW. Machining Science and Technology. https://doi.org/10.1080/10910340802519379
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.