The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
MACHINING TITANIUM AND ITS ALLOYS
Abstract
Titanium and its alloys are attractive materials due to their unique high strength-weight ratio that is maintained at elevated temperatures and their exceptional corrosion resistance. The major application of titanium has been in the aerospace industry. However, the focus shift of market trends from military to commercial and aerospace to industry has also been reported. On the Other hand, titanium and its alloys are notorious for their poor thermal properties and are classified as difficult-to-machine materials. These properties limit the use of these materials especially in the commercial markets where cost is much more of a factor than in aerospace. Machining is an important manufacturing process because it is almost always involved if precision is required and is the most cost effective process for small volume production. This paper reviews the machining of titanium and its alloys and proposes potential research issues.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
New observations on the mechanism of chip formation when machining titanium alloys
Komanduri, R., & Von Turkovich, B. F. (1981) · Wear · doi:10.1016/0043-1648(81)90242-8 · Cited by 405
Cited by
Measurement and analysis of surface roughness in turning of aerospace titanium alloy (gr5)
Ramesh, S., Karunamoorthy, L., & Palanikumar, K. (2012) · Measurement · doi:10.1016/j.measurement.2012.01.010 · Cited by 151
Kumar, D., Gururaja, S., & Jawahir, I. S. (2020) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2020.08.064 · Cited by 58
Experimental Parametric Relationships for Chip Geometry in Dry Machining of the Ti6Al4V Alloy
Sánchez Hernández, Y., Trujillo Vilches, F. J., Bermudo Gamboa, C., & Sevilla Hurtado, L. (2018) · Materials · doi:10.3390/ma11071260 · Cited by 36
Metadata
- Authors
- Yang, X., & Richard Liu, C.
- Venue
- Machining Science and Technology
- Publisher
- Informa UK Limited
- Published
- 1999-01
- Volume
- 3
- Issue
- 1
- Pages
- 107-139
- ISSN
- 1091-0344 (ISSN-L)
- 1532-2483
- OpenAlex
- W2158557293
- Cited by
- 337
- References
- 1
- FWCI
- 3.54
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: MACHINING TITANIUM AND ITS ALLOYS. https://app.cochat.ai/papers/10.1080/10940349908945686
- The paper
- Yang, X., & Richard Liu, C. (1999). MACHINING TITANIUM AND ITS ALLOYS. Machining Science and Technology. https://doi.org/10.1080/10940349908945686
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
