MACHINING TITANIUM AND ITS ALLOYS
The DOI matches its Crossref record; 20 of the 20 references it cites were found in a registry or an index.
Abstract
Titanium and its alloys are attractive materials due to their unique high strength-weight ratio that is maintained at elevated temperatures and their exceptional corrosion resistance. The major application of titanium has been in the aerospace industry. However, the focus shift of market trends from military to commercial and aerospace to industry has also been reported. On the Other hand, titanium and its alloys are notorious for their poor thermal properties and are classified as difficult-to-machine materials. These properties limit the use of these materials especially in the commercial markets where cost is much more of a factor than in aerospace. Machining is an important manufacturing process because it is almost always involved if precision is required and is the most cost effective process for small volume production. This paper reviews the machining of titanium and its alloys and proposes potential research issues.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
(1987) · Journal of Mechanical Working Technology · doi:10.1016/0378-3804(87)90039-8 · Cited by 2,107
Mechanics of the Metal Cutting Process. I. Orthogonal Cutting and a Type 2 Chip
Merchant, M. E. (1945) · Journal of Applied Physics · doi:10.1063/1.1707586 · Cited by 1,318
Catastrophic Thermoplastic Shear
Recht, R. F. (1964) · Journal of Applied Mechanics · doi:10.1115/1.3629585 · Cited by 588
New observations on the mechanism of chip formation when machining titanium alloys
Komanduri, R., & Von Turkovich, B. F. (1981) · Wear · doi:10.1016/0043-1648(81)90242-8 · Cited by 405
Machining of Titanium and its Alloys—a Review
Machado, A. R., & Wallbank, J. (1990) · Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture · doi:10.1243/pime_proc_1990_204_047_02 · Cited by 330
Tool Wear in Titanium Machining
Hartung, P. D., Kramer, B. M., & von Turkovich, B. F. (1982) · CIRP Annals · doi:10.1016/s0007-8506(07)63272-7 · Cited by 309
Machining Process Modeling: A Review
Ehmann, K. F., Kapoor, S. G., DeVor, R. E., & Lazoğlu, İ. (1997) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.2836805 · Cited by 282
Dearnley, P. A., & Grearson, A. N. (1986) · Materials Science and Technology · doi:10.1179/mst.1986.2.1.47 · Cited by 262
Some clarifications on the mechanics of chip formation when machining titanium alloys
Komanduri, R. (1982) · Wear · doi:10.1016/0043-1648(82)90113-2 · Cited by 252
Chip Formation in the Machining of Hardened Steel
Shaw, M. C., & Vyas, A. (1993) · CIRP Annals - Manufacturing Technology · doi:10.1016/s0007-8506(07)62385-3 · Cited by 198
Computational Machining of Titanium Alloy—Finite Element Modeling and a Few Results
Obikawa, T., & Usui, E. (1996) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.2831013 · Cited by 178
Machining Ti6Al4V alloy with a wBN-cBN composite tool
Bhaumik, S., Divakar, C., & Singh, A. K. (1995) · Materials & Design (1980-2015) · doi:10.1016/0261-3069(95)00044-5 · Cited by 129
Evaluation of carbide grades and a new cutting geometry for machining titanium alloys
Komanduri, R., & Reed, W. R. (1983) · Wear · doi:10.1016/0043-1648(83)90011-x · Cited by 86
On a Thermomechanical Model of Shear Instability in Machining
Zhen-Bin, H., & Komanduri, R. (1995) · CIRP Annals · doi:10.1016/s0007-8506(07)62277-x · Cited by 70
Adiabatic shear bands in titanium and titanium alloys: a critical review
Shahan, A. R., & Taheri, A. (1993) · Materials & Design (1980-2015) · doi:10.1016/0261-3069(93)90078-a · Cited by 69
Shear localization during metal cutting
Semiatin, S. L., & Rao, S. B. (1983) · Materials Science and Engineering · doi:10.1016/0025-5416(83)90200-8 · Cited by 68
Single-step superfinish hard machining: Feasibility and feasible cutting conditions
Liu, C. R., & Mittal, S. (1996) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/0736-5845(95)00029-1 · Cited by 66
The Technology management handbook
(1999) · Choice Reviews Online · doi:10.5860/choice.36-3930 · Cited by 44
Goldberg, D., & Hazelton, W. S. (1952) · OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) · Cited by 41
The effects of temperature on the machining of metals
Dillon, O. W., Angelis, R. J. D., Lu, W., Gunasekera, J. S., & Deno, J. A. (1990) · Journal of Materials Shaping Technology · doi:10.1007/bf02834790 · Cited by 29
Cited by
Machining induced surface integrity in titanium and nickel alloys: A review
Ulutan, D., & Ozel, T. (2011) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2010.11.003 · Cited by 1,252
Machinability of titanium alloys (Ti6Al4V and Ti555.3)
Arrazola, P.-J., Garay, A., Iriarte, L.-M., Armendia, M., Marya, S., & Le Maître, F. (2009) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2008.06.020 · Cited by 595
Additive Manufacturing of Metallic Materials: A Review
Zhang, Y., Wu, L., Guo, X., Kane, S., Deng, Y., Jung, Y.-G., Lee, J.-H., & Zhang, J. (2018) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-017-2747-y · Cited by 521
Biomedical Applications of Titanium Alloys: A Comprehensive Review
Marin, E., & Lanzutti, A. (2023) · Materials · doi:10.3390/ma17010114 · Cited by 489
Sima, M., & Özel, T. (2010) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2010.08.004 · Cited by 477
Metadata
- Authors
- Yang, X., & Richard Liu, C.
- Venue
- Machining Science and Technology
- Publisher
- Informa UK Limited
- Published
- 1999-01
- Volume
- 3
- Issue
- 1
- Pages
- 107-139
- ISSN
- 1091-0344 (ISSN-L)
- 1532-2483
- OpenAlex
- W2158557293
- Cited by
- 337
- References
- 20
- FWCI
- 3.54
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.