The DOI matches its Crossref record.
Computational Machining of Titanium Alloy—Finite Element Modeling and a Few Results
Abstract
A Finite element modeling was developed for the computational machining of titanium alloy Ti-6Al-4V. The chip formation in metal cutting is one of the large deformation problems, thus, in the formulation of the elastic-plastic deformation analysis, geometrical nonlinearity due to the large shape change of the finite elements was taken into account and the over-constraint of incompressibility on the deformation of ordinary finite elements in the plastic range was relaxed to make the elements deformable as a real continuum. A ductile fracture criterion on the basis of strain, strain rate, hydrostatic pressure and temperature was applied to the crack growth during the chip segmentation. The temperature field in the flowing chip and workpiece and the fixed tool was calculated simultaneously by an unsteady state thermal conduction analysis and the remeshing of tool elements. The serrated chips predicted by the computational machining showed striking resemblances in the shape and irregular pitch of those obtained by actual cutting. The mean cutting forces and the amplitude of cutting force vibration in the computational machining were in good agreement with those in the actual machining.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Calamaz, M., Coupard, D., & Girot, F. (2008) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2007.10.014 · Cited by 622
Characteristics of cutting forces and chip formation in machining of titanium alloys
Sun, S., Brandt, M., & Dargusch, M. S. (2009) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2009.02.008 · Cited by 485
Sima, M., & Özel, T. (2010) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2010.08.004 · Cited by 477
Problems and solutions in machining of titanium alloys
Pramanik, A. (2014) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-013-5326-x · Cited by 382
MACHINING TITANIUM AND ITS ALLOYS
Yang, X., & Richard Liu, C. (1999) · Machining Science and Technology · doi:10.1080/10940349908945686 · Cited by 337
Metadata
- Authors
- Obikawa, T., & Usui, E.
- Venue
- Journal of Manufacturing Science and Engineering
- Publisher
- ASME International
- Published
- 1996-05-01
- Volume
- 118
- Issue
- 2
- Pages
- 208-215
- ISSN
- 1087-1357 (ISSN-L)
- 1528-8935
- OpenAlex
- W1548714323
- Cited by
- 178
- References
- 0
- FWCI
- 15.03
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Computational Machining of Titanium Alloy—Finite Element Modeling and a Few Results. https://app.cochat.ai/papers/10.1115/1.2831013
- The paper
- Obikawa, T., & Usui, E. (1996). Computational Machining of Titanium Alloy—Finite Element Modeling and a Few Results. Journal of Manufacturing Science and Engineering. https://doi.org/10.1115/1.2831013
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.