CoChat

Manganese, Iron, and Total Particulate Exposures to Welders

Flynn, Michael R., Susi, Pam · 2009 · Journal of Occupational and Environmental Hygiene

The DOI matches its Crossref record; 32 of the 32 references it cites were found in a registry or an index.

Abstract

Welders are exposed to a variety of metal fumes, including manganese, that may elevate the risk for neurological disease. This study examines several large data sets to characterize manganese, iron, and total particulate mass exposures resulting from welding operations. The data sets contained covariates for a variety of exposure modifiers, including the presence of ventilation, the degree of confinement, and the location of the personal sampler (i.e., behind or in front of the welding helmet). The analysis suggests that exposures to manganese are frequently at or above the current ACGIH(R) threshold limit value of 0.2 mg/m(3). In addition, there is evidence that local exhaust ventilation can control the exposures to manganese and total fume but that mechanical ventilation may not. The data suggest that higher exposures are associated with a greater degree of enclosure, particularly when local exhaust ventilation is absent. Samples taken behind the helmet were, in general, lower than those measured outside of it. There were strong correlations among manganese, iron, and total particulate mass exposures, suggesting simple equations to estimate one fume component from any of the others.

Overview

Integrity signals

Registry

Crossref · 10.1080/15459620903454600

Cites

32 of 32 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Verification

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Citations

Cites

Show all 32 references

Research works printed but not linked: 6

  1. ACGIH . 1992 . Documentation of TLVs, , 6th ed. , Cincinnati, Ohio : ACGIH .
  2. ACGIH . 2009 . TLVs and BEIs Based on the Documentation of the Threshold Limit Values for Chemical Substances and Physical Agents & Biological Exposure Indices , Cincinnati, Ohio : ACGIH .
  3. American Welding Society . 1979 . Fumes and Gases in the Welding Environment. , Miami, Fla. : American Welding Society .
  4. National Institute for Occupational Safety and Health (NIOSH) . 1998 . Avondale Shipyards, New Orleans, Louisiana Edited by: Kiefer , M. , Trout , D. and Wallace , M. HETA 97-0260-2716
  5. 10.1093/annhyg/43.7.457 · doi:10.1093/annhyg/43.7.457
  6. “Welding Fume Exposure Database.” Available at www.twi.co.uk/content/fume_exposure_intro.html(Accessed Jan. 29, 2008)

Cited by

See all 67

Metadata

Authors
Flynn, M. R., & Susi, P.
Affiliations
  • University of North Carolina at Chapel Hill (US)
  • Center for Construction Research and Training (US)
Venue
Journal of Occupational and Environmental Hygiene
Published
2009-12-15
Volume
7
Issue
2
Pages
115-126
ISSN
  • 1545-9624 (ISSN-L)
  • 1545-9632
OpenAlex
W2108981593
Cited by
67
References
31
Citations by year
2026: 1 · 2025: 2 · 2024: 6 · 2023: 1 · 2022: 5 · 2021: 2 · 2020: 5 · 2019: 1 · 2018: 1 · 2017: 3 · 2016: 8 · 2015: 6 · 2014: 8 · 2013: 4 · 2012: 5
FWCI
14.41
Type
journal article
Language
en
Open access
closed
Locations
  • Journal of Occupational and Environmental Hygiene (publishedVersion)
  • PubMed (publishedVersion)
Funders
National Institute for Occupational Safety and Health (U54OH008307)
Topics
  • Health Sciences › Medicine › Public Health, Environmental and Occupational Health › Occupational Health and Safety in Workplaces
  • Physical Sciences › Environmental Science › Health, Toxicology and Mutagenesis › Heavy Metal Exposure and Toxicity
  • Physical Sciences › Engineering › Safety, Risk, Reliability and Quality › Industrial and Mining Safety
Keywords
manganese exposure, iron exposure, welding fumes, welders, local exhaust ventilation, mechanical ventilation, threshold limit values, occupational exposure assessment
MeSH terms
Air Pollutants, Occupational, Environmental Monitoring, Humans, Iron, Manganese, Ventilation, Welding, Occupational Exposure, Risk Assessment, Particulate Matter

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Manganese, Iron, and Total Particulate Exposures to Welders. https://app.cochat.ai/papers/10.1080/15459620903454600
The paper
Flynn, M. R., & Susi, P. (2009). Manganese, Iron, and Total Particulate Exposures to Welders. Journal of Occupational and Environmental Hygiene. https://doi.org/10.1080/15459620903454600

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.