The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Material Waste in the UAE Construction Industry: Main Causes and Minimization Practices
Abstract
The United Arab Emirates (UAE) is facing the challenge of achieving sustainability on construction sites. One of the main barriers lies in the increasing amounts of material waste generated from construction activities, dumped in landfills. This research examined previous studies about the sources of waste and the recommended measures to minimize it. The significance of these causes and frequency of implementation of adequate measures in the UAE construction sites were examined. Four construction projects were visited before a survey of contractors' perceptions was conducted of the problem, causes of material waste, waste minimization measures and their benefits. The research revealed that the main causes of material waste are lack of awareness, excessive off-cuts resulting from poor design, and rework and variations. The most frequent measures practised to minimize material waste are: staff training, adequate storage and just-in-time delivery of materials. Waste measurement and waste segregation are areas that need more efficient implementation to achieve material waste minimization targets. Moreover, contractors' perceptions towards the benefits of material waste minimization revealed that this waste is primarily considered a financial problem and its minimization a cost-cutting activity. In contrast, the environmental dimension was neglected by surveyed companies.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Risk assessment and allocation in the UAE construction industry
El-Sayegh, S. M. (2008) · International Journal of Project Management · doi:10.1016/j.ijproman.2007.07.004 · Cited by 468
Cited by
Kabirifar, K., Mojtahedi, M., Wang, C., & Tam, V. W. Y. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.121265 · Cited by 695
A critical review of 3D printing in construction: benefits, challenges, and risks
El-Sayegh, S., Romdhane, L., & Manjikian, S. (2020) · Archives of Civil and Mechanical Engineering · doi:10.1007/s43452-020-00038-w · Cited by 387
Ajayi, S. O., Oyedele, L. O., Bilal, M., Akinade, O. O., Alaka, H. A., Owolabi, H. A., & Kadiri, K. O. (2015) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2015.06.001 · Cited by 282
Govindan, K., Madan Shankar, K., & Kannan, D. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.07.100 · Cited by 268
The classification of construction waste material using a deep convolutional neural network
Davis, P., Aziz, F., Newaz, M. T., Sher, W., & Simon, L. (2021) · Automation in Construction · doi:10.1016/j.autcon.2020.103481 · Cited by 204
Metadata
- Authors
- Al-Hajj, A., & Hamani, K.
- Venue
- Architectural Engineering and Design Management
- Publisher
- Informa UK Limited
- Published
- 2011-11
- Volume
- 7
- Issue
- 4
- Pages
- 221-235
- ISSN
- 1745-2007 (ISSN-L)
- 1752-7589
- OpenAlex
- W2113292977
- Cited by
- 173
- References
- 1
- FWCI
- 4.15
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.