Efficient and cost-effective adsorbent brick sand nanoparticles used for removal of heavy metals
Open accessThe DOI matches its Crossref record; 51 of the 52 references it cites were found in a registry or an index, and 1 are not checked yet.
Abstract
We are introducing cost effective, easily available brick sand nano-particles (BSNP) (44.208 nm) as an adsorbent in batch process for removal of heavy toxic metals such as Pb, Cd, and Cr from aqueous solution. We used two types of adsorbents, one is acid treated BSNP and other one is untreated BSNP, and investigated adsorbent properties with function of contact time, temperature, and pH. The efficiency or performance of adsorbent was characterized by AAS for percentage of removal from solution, EDS for elemental analysis to confirm the metals adsorption. The Langmuir, Freundlich, Temkin, Hill De Boer, Elovich, and Redlich-Peterson adsorption isotherms were studies to find out the quality of the adsorbent. At 5.68 to 7.6 pH, the maximum removal percentages of Pb, Cd, and Cr were 97% from the aqueous solution. The temperatures at 40℃ to 60℃, the Pb, Cd, and Cr experiments were carried out at their highest possible percentages (98%). The reaction process was pseudo-second order model and several thermodynamic factors, including Intraparticle diffusion, Elovich kinetic model, Boyd kinetic model, activation energy, Gibbs free energy, enthalpy change, and entropy change ensured the adsorbent efficiency of brick sand nanoparticles. The results of present research indicated that Brick Sand Nano-Particles (BSNP) may play a vital role as a cost-effective, efficient, and easily available adsorbent for the removal of Pb, Cd, and Cr from wastewater.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The check wasn’t confident either way, so it gives no verdict — never disputed.
In the citing paper
“On the surface of the biochar, basic MgO sites are formed by reacting with basic O2− in the O2− Mg2+ linkages, thereby enhancing CO2 adsorption57,61.”
From Metals incorporated agricultural waste corn Cob-based biochar used as an adsorbent for CO2 capturing (2025) · cites this paper as [61]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The adsorption of gases on plane surfaces of glass, mica and platinum
Langmuir, I. (1918) · Journal of the American Chemical Society · doi:10.1021/ja02242a004 · Cited by 23,242 · cited 1×
“This model precludes adsorbate transmigration in the surface plane while allowing uniform deposition impulses onto the surface (Langmuir, 1918).”
Über die adsorption in lösungen
Freundlich, H. (1907) · Zeitschrift für Physikalische Chemie · doi:10.1515/zpch-1907-5723 · Cited by 9,001 · cited 1×
“Freundlich (1906), postulated an equation for multilayer adsorption onto heterogeneous adsorption process.”
On the Structure of a Catalyst Surface
Sips, R. (1948) · The Journal of Chemical Physics · doi:10.1063/1.1746922 · Cited by 3,650 · cited 1×
“This is versatile model in both homogeneous or heterogeneous systems and the adsorption equilibrium is representing a wide range of concentration of adsorbate (Gimbert, Morin-Crini, Renault, Badot, & Crini, 2008; Sips, 1948).”
Modelling and interpretation of adsorption isotherms
Ayawei, N., Ebelegi, A. N., & Wankasi, D. (2017) · Journal of Chemistry · doi:10.1155/2017/3039817 · Cited by 2,957 · cited 1×
“The Elovich adsorption isotherm linear form is given as below (Ayawei, Ebelegi, & Wankasi, 2017): The maximum adsorption capacity and adsorption constant can be calculated from ln qe/Ce versus qe curve slope and intercept, respectively.”
Vadivelan, V., & Kumar, K. V. (2005) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2005.01.007 · Cited by 1,643 · cited 1×
“The linear form of the model is as follows (Vadivelan & Vasanth, 2005); Here, K IPD is intra-particle diffusion constant, and C is intercept.”
Ihsanullah, Abbas, A., Al-Amer, A. M., Laoui, T., Al-Marri, M. J., Nasser, M. S., Khraisheh, M., & Atieh, M. A. (2016) · Separation and Purification Technology · doi:10.1016/j.seppur.2015.11.039 · Cited by 1,259 · cited 1×
“…such as chemical precipitation (Oncel, Muhcu, Demirbas, & Kobya, 2013), oxidation and reduction (Khan, Sayed, Sohail, Shah, & Raja, 2019), ion exchange (Kansara, Bhati, Narang, & Vaishnavi, 2016), reverse osmosis (Ozaki, Sharma, & Saktaywin, 2002), and adsorption (Ihsanullah et al., 2016).”
Wu, F.-C., Tseng, R.-L., & Juang, R.-S. (2009) · Chemical Engineering Journal · doi:10.1016/j.cej.2009.01.014 · Cited by 1,134 · cited 1×
“The Elovich model can be written as follows (Elovich & Larionov, 1962; Wu, Tseng, & Juang, 2009): Here, qt is adsorption capacity at any time t, α is initial adsorption rate, β is adsorption constant.”
Recent modifications to Langmuir isotherms
Temkin, M. J., & Pyzhev, V. (1940) · Cited by 1,057
HAMDAOUI, O., & NAFFRECHOUX, E. (2007) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2007.01.021 · Cited by 1,013
Tea waste as a low cost adsorbent for the removal of Cu and Pb from wastewater
Amarasinghe, B. M. W. P. K., & Williams, R. A. (2007) · Chemical Engineering Journal · doi:10.1016/j.cej.2007.01.016 · Cited by 845 · cited 1×
“…2008), brick clay (Sanad, Moniem, Abdel-Latif, Hossein, & El-Mahllawy, 2021), rice husk (Chuah, Jumasiah, Azni, Katayon, & Choong, 2005), tea waste (Amarasinghe & Williams, 2007), orange peel (Feng, Guo, Liang, Zhu, & Liu, 2011), sugar industry waste (Gupta, Jain, Ali, Sharma, & Saini, 2003), red…”
Research works printed but not linked: 5
- 10.1002/1097-4660(200011)75:11<963:AID-JCTB302>3.0.CO;2-Z · doi:10.1002/1097-4660(200011)75:11
- Kiseler, A. V. C. (1958). Vapour adsorption in the formation of adsorbate mollecule complexes on the surface. Kolloid Zhur, 20, 338–348.
- Krishna, R. H., & Swamy, A. V. V. S. (2012). Investigation on the effect of particle size and adsorption kinetics for the removal of Cr (VI) from the aqueous solutions using low-cost sorbent. European Chemical Bulletin, 1(7), 258–262.
- Roginsky, S. Z., & Zeldovich, Y. B. (1934). The catalytic oxidation of carbon monoxide on manganese dioxide. Acta Physical Chemistry USSR, 1, 554–594.
- Shahbeig, H., Bagheri, N., Ghorbanian, S. A., Hallajisani, A., & Poorkarimi, S. (2013). A new adsorption isotherm model of aqueous solutions on granular activated carbon. World Journal of Modelling and Simulation, 9(4), 243–254.
Cited by
Karim, M. A., Najibullah, M., Ahmed, S., Dipti, S. S., & Salam, S. M. A. (2025) · Biomass Conversion and Biorefinery · doi:10.1007/s13399-024-05986-4 · Cited by 8
Self-citationObaid, A. O., Albishri, A. K., Sallam, S., Alharbi, M. M., Alkhamis, K. M., Alaysuy, O., Alatawi, N. M., & El‐Metwaly, N. M. (2025) · Process Safety and Environmental Protection · doi:10.1016/j.psep.2025.106965 · Cited by 7
Brick sand particles as an adsorbent in column chromatography to remove heavy metals from solution
Hossain, D., Prodhan, M. M. H., Hossain, M. N., Dipti, S. S., Azad, M. A. K., & Karim, M. A. (2024) · Bangladesh Journal of Scientific and Industrial Research · doi:10.3329/bjsir.v59i1.69057 · Cited by 4
Self-citationKarim, M. A., Rahman, M. R., Dipti, S. S., & Elahi, M. M. E. (2024) · Journal of Water and Environment Technology · doi:10.2965/jwet.23-087 · Cited by 4
Self-citationMetals incorporated agricultural waste corn Cob-based biochar used as an adsorbent for CO2 capturing
Ahmed, S., Hossain, D., Dipti, S. S., Karim, M. A., & Azad, M. A. K. (2025) · Scientific Reports · doi:10.1038/s41598-025-31699-3 · Cited by 4
“The equation below was to determine the pore volume 52,53,61 : pore volume Here, W w is the sample’s weight while wet, W d is its dry weight, and ρ is its water density.”
InfluentialSelf-citation
Metadata
- Authors
- Karim, A., Hossain, D., Hossain, I., Dipti, S. S., & Azad, A. K.
- Affiliations
- University of Rajshahi (BD)
- Corresponding author
- Karim, Anwarul
- Venue
- Water Science
- Published
- 2024-01-26
- Volume
- 38
- Issue
- 1
- Pages
- 109-127
- ISSN
- 1110-4929 (ISSN-L)
- 2357-0008
- OpenAlex
- W4391251558
- Cited by
- 11
- References
- 51
- Citations by year
- 2026: 5 · 2025: 3 · 2024: 3
- FWCI
- 1.27
- Type
- journal article
- Language
- en
- Open access
- hybrid
- doi.org
- Licence
- Locations
- Water Science (publishedVersion, cc-by-nc)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- Rajshahi University (The grant no. ref. A1380/5/52/ University Grant Commission (Bimog) / Engineering/2/18-19)
- Topics
- Physical Sciences › Environmental Science › Water Science and Technology › Adsorption and biosorption for pollutant removal
- Physical Sciences › Environmental Science › Environmental Engineering › Environmental remediation with nanomaterials
- Physical Sciences › Environmental Science › Water Science and Technology › Heavy Metal Pollution Remediation
- Keywords
- heavy metal adsorption, lead removal, cadmium removal, chromium removal, low-cost adsorbent, adsorption isotherms, adsorption kinetics, adsorption thermodynamics, wastewater treatment, pH effect on adsorption
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Efficient and cost-effective adsorbent brick sand nanoparticles used for removal of heavy metals. https://app.cochat.ai/papers/10.1080/23570008.2024.2307197
- The paper
- Karim, A., Hossain, D., Hossain, I., Dipti, S. S., & Azad, A. K. (2024). Efficient and cost-effective adsorbent brick sand nanoparticles used for removal of heavy metals. Water Science. https://doi.org/10.1080/23570008.2024.2307197
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.