The DOI matches its Crossref record; 107 of the 107 references it cites were found in a registry or an index; 32 of the 70 sources its claims cite were checked for support.
Metals incorporated agricultural waste corn Cob-based biochar used as an adsorbent for CO2 capturing
Open accessPublished version of a preprint
Abstract
The development of effective and affordable adsorption materials for CO 2 capture is a crucial issue. Biochar can play a significant role in CO 2 capture, alongside other available adsorbents. In this research, biochar was made from the agricultural waste corn cobs through a pyrolysis process. Biochar itself has a limited capacity for capturing CO 2 . It needs to be modified to increase its CO 2 -capturing efficiency. This research aims to improve the CO 2 -capturing efficiency of corn cob-based biochar by incorporating magnesium and sodium metals into its structure with heat treatment under N 2 . The physicochemical properties of biochar were characterized by pore volume (25%), specific surface area (346.2 m 2 /g), average particle size (0.52 nm), and point zero charge (pH = 5.12). The XRD results showed that incorporating metals into biochar improved crystal structure formation and boosted the degree of carbon structure ordering. SEM analysis revealed that the biochar surface impregnated with metal oxide had a distribution of spotted activation centers. The adsorption of CO 2 onto biochar was in the order of Mg metal-incorporated biochar > Na metal-incorporated biochar > pristine biochar at 25 °C and 1 atm. The elemental analysis employed by EDX indicates that the Mg-incorporated biochar has a higher CO 2 uptake capacity. The XPS spectrum and 13 C NMR also agreed with the EDX results. The CO 2 adsorption efficiency of Mg-incorporated biochar reached an impressive 94.6%, the highest reported in the literature to date. This efficiency was also higher than that of Na-loaded biochar (81.20%) and pristine biochar (64.43%). We can conclude that corn-cob-based biochar, which is made from agricultural waste, is both economically viable and effective in CO 2 -capturing systems.
Overview
CoChat Summary
TL;DR
Corn-cob biochar was pyrolyzed and then loaded with Mg or Na to test CO2 capture, with Mg performing best. The paper reports CO2 removal efficiencies of 94.6% for Mg-biochar, 81.20% for Na-biochar, and 64.43% for pristine biochar.
Key findings
- Corn-cob biochar was prepared by pyrolysis and modified with magnesium and sodium salts; characterization confirmed biochar formation and metal incorporation by FTIR and XRD.
- The paper reports physicochemical values for the prepared biochar including pore volume of 25%, specific surface area of 346.2 m2/g, point of zero charge of pH 5.12, and average crystallite/particle size of 0.52 nm.
- CO2 removal efficiency, calculated from initial and final gas concentrations, was 94.6% for Mg-loaded biochar, 81.20% for Na-loaded biochar, and 64.43% for pristine biochar.
- The authors attribute the higher Mg performance to basic MgO sites, increased porosity, and larger active surface area; Na-loaded biochar performed worse, which they link to stable sodium nitrate species and possible pore blockage.
Methods
- Experimental adsorption study using corn cobs collected in Rajshahi, Bangladesh; cobs were washed, sun-dried, acid-impregnated with H2SO4, carbonized, and then metal-loaded with NaNO3 or Mg(NO3)2·6H2O by wet impregnation and heat treatment.
- CO2 adsorption was tested in a column with 5 g adsorbent, CO2 flow rate of 5 mL/min, pressure of 1000 lb/in², and 1 min contact time; exit gas was analyzed with a Geotech Biogas 5000 Portable Analyzer.
- Characterization used FTIR, XRD, SEM, EDX, XPS, and 13C NMR; adsorption efficiency was computed as \((C0 - C1)/C0 \times 100\).
Limitations
- The paper does not state a clear number of replicate adsorption runs, statistical uncertainty, or error bars for the reported efficiencies.
- The text makes evident that the study is limited to one biomass source and a single set of adsorption conditions (e.g., 25 °C and 1 atm reported in the abstract), so generalizability across other feedstocks and conditions is not established.
- The paper states some conclusions as “highest reported to date,” but the supporting comparative benchmark details are not fully laid out in the provided text.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Figures
















Verification
Claims the paper makes
22 Valid · 6 Not valid · 17 Not checked · 54 Own results and interpretations
The sources with a verdict support this claim; the rest weren’t checked yet, have no full text we could read, or their verdicts aren’t rated yet.
In the paper
“However, the cyclic process of CO2 absorption and regeneration in these amine solutions results in amine degradation.”
§ Metals incorporated agricultural waste corn Cob-based biochar used as an adsorbent for CO2 capturing > Introduction Climate change represents a critical global challenge. In recent decades, emissions of greenhouse gases (GHGs), primarily carbon dioxide (CO2), methane (CH4), and nitrous oxide (N2O), have significantly contributed to global warming, an increasingly severe environmental issue1. Reports indicate that CO2 is the primary greenhouse gas responsible for this warming2. Since 1750, atmospheric CO2 levels have risen considerably and currently stand at 410 parts per million3. By the year 2100, CO2 concentrations are expected to reach 570 ppm, leading to an increase of 1.9 °C in mean temperatures, according to a report by the International Panel on Climate Change (IPCC) (IPCC 2014)3. The terrestrial environment would be significantly affected by these changes, resulting in extreme heat waves, severe droughts, altered rainfall patterns, melting glaciers, and rising sea levels4. The IPCC warns that if CO2 levels continue to rise, climate change will lead to widespread, severe, and irreversible consequences for both people and ecosystems5. The fifth IPCC assessment report emphasizes the necessity of developing sustainable techniques for CO2 capture and storage to mitigate CO2 emissions and combat global warming3. One of the most promising methods for reducing atmospheric CO2 is adsorption, which offers excellent stability, straightforward regeneration, and effective adsorption capabilities6–8. The key to advancing CO2 capture technology lies in the development of efficient adsorbents that demonstrate strong adsorption performance while being economically viable. In recent decades, extensive research has been conducted on both liquid and solid adsorbents. Among these, the traditional and most widely proven method for industrial CO2 capture is amine-based chemical absorption9. However, the cyclic process of CO2 absorption and regeneration in these amine solutions results in amine degradation. This degradation reduces the amine’s capacity to absorb CO2 and accelerates equipment corrosion10–12. Although liquid sorbents are generally more effective at capturing CO2, their associated drawbacks, along with the high heat and energy demands of the chemical CO2 absorption process11–13, highlight the need for the development of more efficient, non-corrosive sorbents with lower regeneration energy requirements. Additionally, a significant disadvantage of liquid sorbents is their potential to chemically react with other acidic gases present in the mixture, which may further limit the amount of active CO2 they can absorb. Solid adsorbents, including metal-organic frameworks (MOFs)14, zeolites15, carbonaceous materials16, and amine-supported silica17, have gained popularity over liquid absorbents because of their lower costs and higher adsorption capacities. However, the use of solid adsorbents such as MOFs and zeolites is limited by certain inherent drawbacks. Metal-Organic Frameworks (MOFs) often face stability issues when exposed to contaminated gases. Their structural integrity can be compromised by interactions with certain impurities in gas streams, which may result in degradation or even complete failure. To ensure the long-term durability of MOFs, it is essential to employ effective purification methods and maintain controlled environments18,19. The adsorption capacity of zeolites decreases significantly at 30 °C, despite their enhanced stability and suitability for gas adsorption. A high regeneration temperature is required to support the energy-intensive regeneration process20,21. These solid sorbents primarily capture CO2 through physisorption, mainly via van der Waals interactions22,23, which enhances the energy efficiency of regeneration. However, large-scale applications may face challenges in fully utilizing these sorbents due to the high cost associated with their synthesis and modification. Among the various solid adsorbents, carbonaceous materials are particularly environmentally favorable. In comparison to traditional solid adsorbents, biochar is characterized as an insoluble, stable, highly aromatic, and carbon-rich material24. The International Biochar Initiative (IBI) defines biochar as a carbon-rich material produced from biomass through a thermochemical decomposition process, usually pyrolysis, under low or limited oxygen conditions. Pyrolysis is the most common method, involving heating biomass in an oxygen-free environment at moderate to high temperatures. This process decomposes biomass into biochar, bio-oil, and syngas without combustion. These methods avoid direct combustion of biomass, instead relying on thermal decomposition in oxygen-deprived environments to yield biochar as a solid carbonaceous material21,25–27. The biomass used to produce biochar typically encompasses a variety of waste materials from agricultural sources, including wood chips, peanut shells, straw, and wood scraps, as well as industrial organic waste and urban sludge28. The primary constituents of biochar are carbon, hydrogen, oxygen, and nitrogen, with carbon making up more than 40% of the total elemental composition21. Biochar produced from a variety of raw materials and through different pyrolysis conditions typically displays unique physicochemical properties, including differences in pore structures, specific surface areas, surface oxygen-containing functional groups, and elemental compositions. Biochar has a unique surface structure that makes it a highly effective adsorbent for CO2. It also presents a promising alternative to traditional solid carbon-based catalysts, providing both economic and environmental benefits. Numerous studies have been conducted to improve the physical and chemical properties of raw biochar through various modification processes21, resulting in the creation of modified biochar that significantly improves its adsorption capacity. The properties of biochar can be enhanced through chemical and physical activation processes by optimizing factors, such as the type of activator, activation conditions, and the ratio of activator to precursor. Among the various activators, steam H₂O(g) is considered an environmentally friendly option that can increase pore size and create new pore structures within the biochar. However, using steam alone for activation makes it challenging to regulate the pore structure of biochar and its overall activation efficiency29. In contrast to disposable activators like KOH30, HNO331, and H3PO432, metal salt activators such as ZnCl233, FeCl334, and MgCl229 provide advantages including reduced corrosiveness, environmental friendliness, and reusability. Activated biochar is well-known for its exceptional durability and stability, often persisting for centuries to millennia. This enduring quality highlights its potential for significant applications in climate mitigation and soil enhancement. Moreover, employing chemical activation methods can further enhance these properties, making activated biochar a promising material for sustainable environmental initiatives. Moreover, metal salts can enhance biochar’s porosity and promote graphitization. Biochar is valued in various industries due to its high production capacity and versatility. It is used for various applications, including carbon dioxide capture35,36, water purification37, soil enhancement38, and catalysis37,39. Biochar is recognized as a promising technology for capturing, utilizing, and storing atmospheric carbon. Most techno-economic studies primarily focus on determining the production costs of biochar or evaluating its economic feasibility. However, they often overlook the carbon removal aspect, which has recently emerged as a new market and could serve as a significant revenue stream40. Biomass is an excellent resource for preparing carbon materials. Biomass generally refers to all types of organic materials, encompassing a wide range of plants, animals, and microorganisms. Examples include municipal organic solid waste, animal manure, and agricultural wastes41. Numerous studies have explored the conversion of biomass into carbon compounds up to this point. Biomass is decomposed into biochar, tar, and gas through pyrolysis. Biochar is recognized as a low-cost, environmentally friendly adsorbent material41. Currently, there is significant interest within the scientific community in improving the adsorption capacity of biochar through modifications to its structure and surface properties42. The product created by enhancing pristine biochar, known as unmodified or standard biochar, through physical, chemical, and biological methods to improve its physical, chemical, and biological characteristics, is referred to as modified biochar43. Corn is one of the most widely consumed and grown crops globally, playing a major role in food systems across various regions. It is cultivated extensively in many regions, including North America, Latin America, Sub-Saharan Africa, and parts of Asia. The United States is the leading producer, accounting for about 35–40% of the world’s corn production, primarily from the Midwest region known as the Corn Belt. China is also a major producer, contributing roughly 20–25% of global production, mainly in northeastern and northern provinces. Brazil holds a significant share as well, producing around 10–15%, with production centered in the central-west and southern regions. Other notable producers include Argentina, Mexico, India, and Ukraine, but their contributions are smaller in comparison44. Consequently, a significant amount of corncobs is discarded into the environment every day as agricultural waste. To the best of the author’s knowledge, there is very few research work on corn cob-based biochar as an adsorbent to capture CO2. We are therefore interested in using corncobs as a biochar adsorbent material to absorb CO2. In this study, we utilized agricultural waste corncob to synthesize biochar through the pyrolysis process for the adsorption of CO2. Following heat treatment, sodium and magnesium metal salts were incorporated into the biochar. The study investigated the CO2 uptake effectiveness of both metalized and pristine biochar. Physicochemical analysis techniques, including FTIR, XRD, SEM-EDX mapping, NMR, and XPS, were utilized to evaluate the adsorption mechanism. The biochar derived from corncobs exhibited effective CO2 removal, contributing to the creation of an environmentally friendly and cost-effective adsorbent for practical applications. We believe that the strategy developed in this study offers a novel and sustainable approach for the synthesis of economical porous carbon adsorbents.
What the sources say
- Supportedcites [10] Madzaki, H. et al. Carbon dioxide adsorption on sawdust Biochar. Procedia Eng. 148, 718–725. https://doi.org/10.1016/J.PROENG.2016.06.591 (2016). source
The Introduction states that amine used to capture CO₂ from flue gas degrades as it is continuously recycled. This supports the citing sentence’s description of degradation during repeated absorption and regeneration, although the paper uses the term “recycled” rather than explicitly naming regeneration. (LLM, conf=0.88)
- Not checked — no full text of the sourcecites [11] Creamer, A. E., Gao, B. & Zhang, M. Carbon dioxide capture using Biochar produced from sugarcane Bagasse and hickory wood. Chem. Eng. J. 249, 174–179. https://doi.org/10.1016/J.CEJ.2014.03.105 (2014). source
- Not checked — no full text of the sourcecites [12] Gęsikiewicz-Puchalska, A. et al. Improvement of CO2 uptake of biochars by treatment with mineral acids. Chem. Eng. J. 309, 159–171. https://doi.org/10.1016/J.CEJ.2016.10.005 (2017). source
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Supported
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“The adsorption capacity of zeolites decreases significantly at 30 °C, despite their enhanced stability and suitability for gas adsorption.”
§ Metals incorporated agricultural waste corn Cob-based biochar used as an adsorbent for CO2 capturing > Introduction Climate change represents a critical global challenge. In recent decades, emissions of greenhouse gases (GHGs), primarily carbon dioxide (CO2), methane (CH4), and nitrous oxide (N2O), have significantly contributed to global warming, an increasingly severe environmental issue1. Reports indicate that CO2 is the primary greenhouse gas responsible for this warming2. Since 1750, atmospheric CO2 levels have risen considerably and currently stand at 410 parts per million3. By the year 2100, CO2 concentrations are expected to reach 570 ppm, leading to an increase of 1.9 °C in mean temperatures, according to a report by the International Panel on Climate Change (IPCC) (IPCC 2014)3. The terrestrial environment would be significantly affected by these changes, resulting in extreme heat waves, severe droughts, altered rainfall patterns, melting glaciers, and rising sea levels4. The IPCC warns that if CO2 levels continue to rise, climate change will lead to widespread, severe, and irreversible consequences for both people and ecosystems5. The fifth IPCC assessment report emphasizes the necessity of developing sustainable techniques for CO2 capture and storage to mitigate CO2 emissions and combat global warming3. One of the most promising methods for reducing atmospheric CO2 is adsorption, which offers excellent stability, straightforward regeneration, and effective adsorption capabilities6–8. The key to advancing CO2 capture technology lies in the development of efficient adsorbents that demonstrate strong adsorption performance while being economically viable. In recent decades, extensive research has been conducted on both liquid and solid adsorbents. Among these, the traditional and most widely proven method for industrial CO2 capture is amine-based chemical absorption9. However, the cyclic process of CO2 absorption and regeneration in these amine solutions results in amine degradation. This degradation reduces the amine’s capacity to absorb CO2 and accelerates equipment corrosion10–12. Although liquid sorbents are generally more effective at capturing CO2, their associated drawbacks, along with the high heat and energy demands of the chemical CO2 absorption process11–13, highlight the need for the development of more efficient, non-corrosive sorbents with lower regeneration energy requirements. Additionally, a significant disadvantage of liquid sorbents is their potential to chemically react with other acidic gases present in the mixture, which may further limit the amount of active CO2 they can absorb. Solid adsorbents, including metal-organic frameworks (MOFs)14, zeolites15, carbonaceous materials16, and amine-supported silica17, have gained popularity over liquid absorbents because of their lower costs and higher adsorption capacities. However, the use of solid adsorbents such as MOFs and zeolites is limited by certain inherent drawbacks. Metal-Organic Frameworks (MOFs) often face stability issues when exposed to contaminated gases. Their structural integrity can be compromised by interactions with certain impurities in gas streams, which may result in degradation or even complete failure. To ensure the long-term durability of MOFs, it is essential to employ effective purification methods and maintain controlled environments18,19. The adsorption capacity of zeolites decreases significantly at 30 °C, despite their enhanced stability and suitability for gas adsorption. A high regeneration temperature is required to support the energy-intensive regeneration process20,21. These solid sorbents primarily capture CO2 through physisorption, mainly via van der Waals interactions22,23, which enhances the energy efficiency of regeneration. However, large-scale applications may face challenges in fully utilizing these sorbents due to the high cost associated with their synthesis and modification. Among the various solid adsorbents, carbonaceous materials are particularly environmentally favorable. In comparison to traditional solid adsorbents, biochar is characterized as an insoluble, stable, highly aromatic, and carbon-rich material24. The International Biochar Initiative (IBI) defines biochar as a carbon-rich material produced from biomass through a thermochemical decomposition process, usually pyrolysis, under low or limited oxygen conditions. Pyrolysis is the most common method, involving heating biomass in an oxygen-free environment at moderate to high temperatures. This process decomposes biomass into biochar, bio-oil, and syngas without combustion. These methods avoid direct combustion of biomass, instead relying on thermal decomposition in oxygen-deprived environments to yield biochar as a solid carbonaceous material21,25–27. The biomass used to produce biochar typically encompasses a variety of waste materials from agricultural sources, including wood chips, peanut shells, straw, and wood scraps, as well as industrial organic waste and urban sludge28. The primary constituents of biochar are carbon, hydrogen, oxygen, and nitrogen, with carbon making up more than 40% of the total elemental composition21. Biochar produced from a variety of raw materials and through different pyrolysis conditions typically displays unique physicochemical properties, including differences in pore structures, specific surface areas, surface oxygen-containing functional groups, and elemental compositions. Biochar has a unique surface structure that makes it a highly effective adsorbent for CO2. It also presents a promising alternative to traditional solid carbon-based catalysts, providing both economic and environmental benefits. Numerous studies have been conducted to improve the physical and chemical properties of raw biochar through various modification processes21, resulting in the creation of modified biochar that significantly improves its adsorption capacity. The properties of biochar can be enhanced through chemical and physical activation processes by optimizing factors, such as the type of activator, activation conditions, and the ratio of activator to precursor. Among the various activators, steam H₂O(g) is considered an environmentally friendly option that can increase pore size and create new pore structures within the biochar. However, using steam alone for activation makes it challenging to regulate the pore structure of biochar and its overall activation efficiency29. In contrast to disposable activators like KOH30, HNO331, and H3PO432, metal salt activators such as ZnCl233, FeCl334, and MgCl229 provide advantages including reduced corrosiveness, environmental friendliness, and reusability. Activated biochar is well-known for its exceptional durability and stability, often persisting for centuries to millennia. This enduring quality highlights its potential for significant applications in climate mitigation and soil enhancement. Moreover, employing chemical activation methods can further enhance these properties, making activated biochar a promising material for sustainable environmental initiatives. Moreover, metal salts can enhance biochar’s porosity and promote graphitization. Biochar is valued in various industries due to its high production capacity and versatility. It is used for various applications, including carbon dioxide capture35,36, water purification37, soil enhancement38, and catalysis37,39. Biochar is recognized as a promising technology for capturing, utilizing, and storing atmospheric carbon. Most techno-economic studies primarily focus on determining the production costs of biochar or evaluating its economic feasibility. However, they often overlook the carbon removal aspect, which has recently emerged as a new market and could serve as a significant revenue stream40. Biomass is an excellent resource for preparing carbon materials. Biomass generally refers to all types of organic materials, encompassing a wide range of plants, animals, and microorganisms. Examples include municipal organic solid waste, animal manure, and agricultural wastes41. Numerous studies have explored the conversion of biomass into carbon compounds up to this point. Biomass is decomposed into biochar, tar, and gas through pyrolysis. Biochar is recognized as a low-cost, environmentally friendly adsorbent material41. Currently, there is significant interest within the scientific community in improving the adsorption capacity of biochar through modifications to its structure and surface properties42. The product created by enhancing pristine biochar, known as unmodified or standard biochar, through physical, chemical, and biological methods to improve its physical, chemical, and biological characteristics, is referred to as modified biochar43. Corn is one of the most widely consumed and grown crops globally, playing a major role in food systems across various regions. It is cultivated extensively in many regions, including North America, Latin America, Sub-Saharan Africa, and parts of Asia. The United States is the leading producer, accounting for about 35–40% of the world’s corn production, primarily from the Midwest region known as the Corn Belt. China is also a major producer, contributing roughly 20–25% of global production, mainly in northeastern and northern provinces. Brazil holds a significant share as well, producing around 10–15%, with production centered in the central-west and southern regions. Other notable producers include Argentina, Mexico, India, and Ukraine, but their contributions are smaller in comparison44. Consequently, a significant amount of corncobs is discarded into the environment every day as agricultural waste. To the best of the author’s knowledge, there is very few research work on corn cob-based biochar as an adsorbent to capture CO2. We are therefore interested in using corncobs as a biochar adsorbent material to absorb CO2. In this study, we utilized agricultural waste corncob to synthesize biochar through the pyrolysis process for the adsorption of CO2. Following heat treatment, sodium and magnesium metal salts were incorporated into the biochar. The study investigated the CO2 uptake effectiveness of both metalized and pristine biochar. Physicochemical analysis techniques, including FTIR, XRD, SEM-EDX mapping, NMR, and XPS, were utilized to evaluate the adsorption mechanism. The biochar derived from corncobs exhibited effective CO2 removal, contributing to the creation of an environmentally friendly and cost-effective adsorbent for practical applications. We believe that the strategy developed in this study offers a novel and sustainable approach for the synthesis of economical porous carbon adsorbents.
What the sources say
- Not checked — no full text of the sourcecites [20] Nie, L., Mu, Y., Jin, J., Chen, J. & Mi, J. Recent developments and consideration issues in solid adsorbents for CO2 capture from flue gas. Chin. J. Chem. Eng. 26, 2303–2317. https://doi.org/10.1016/j.cjche.2018.07.012 (2018). source
- Partly supportedcites [21] Guo, S. et al. Recent advances in biochar-based adsorbents for CO2 capture. Carbon Capture Sci. Technol. 4, 100059. https://doi.org/10.1016/j.ccst.2022.100059 (2022). sourceExperimental — accuracy not yet measured
The Introduction (page unavailable) says zeolites’ adsorption capacity decreases rapidly once the temperature is higher than 30 °C. That supports a decline above 30 °C, but not the claim that it decreases significantly at 30 °C. (LLM, conf=0.88)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“Although liquid sorbents are generally more effective at capturing CO2, their associated drawbacks, along with the high heat and energy demands of the chemical CO2 absorption process11–13, highlight the need for the development of more efficient, non-corrosive sorbents with lower regeneration energy requirements.”
§ Metals incorporated agricultural waste corn Cob-based biochar used as an adsorbent for CO2 capturing > Introduction Climate change represents a critical global challenge. In recent decades, emissions of greenhouse gases (GHGs), primarily carbon dioxide (CO2), methane (CH4), and nitrous oxide (N2O), have significantly contributed to global warming, an increasingly severe environmental issue1. Reports indicate that CO2 is the primary greenhouse gas responsible for this warming2. Since 1750, atmospheric CO2 levels have risen considerably and currently stand at 410 parts per million3. By the year 2100, CO2 concentrations are expected to reach 570 ppm, leading to an increase of 1.9 °C in mean temperatures, according to a report by the International Panel on Climate Change (IPCC) (IPCC 2014)3. The terrestrial environment would be significantly affected by these changes, resulting in extreme heat waves, severe droughts, altered rainfall patterns, melting glaciers, and rising sea levels4. The IPCC warns that if CO2 levels continue to rise, climate change will lead to widespread, severe, and irreversible consequences for both people and ecosystems5. The fifth IPCC assessment report emphasizes the necessity of developing sustainable techniques for CO2 capture and storage to mitigate CO2 emissions and combat global warming3. One of the most promising methods for reducing atmospheric CO2 is adsorption, which offers excellent stability, straightforward regeneration, and effective adsorption capabilities6–8. The key to advancing CO2 capture technology lies in the development of efficient adsorbents that demonstrate strong adsorption performance while being economically viable. In recent decades, extensive research has been conducted on both liquid and solid adsorbents. Among these, the traditional and most widely proven method for industrial CO2 capture is amine-based chemical absorption9. However, the cyclic process of CO2 absorption and regeneration in these amine solutions results in amine degradation. This degradation reduces the amine’s capacity to absorb CO2 and accelerates equipment corrosion10–12. Although liquid sorbents are generally more effective at capturing CO2, their associated drawbacks, along with the high heat and energy demands of the chemical CO2 absorption process11–13, highlight the need for the development of more efficient, non-corrosive sorbents with lower regeneration energy requirements. Additionally, a significant disadvantage of liquid sorbents is their potential to chemically react with other acidic gases present in the mixture, which may further limit the amount of active CO2 they can absorb. Solid adsorbents, including metal-organic frameworks (MOFs)14, zeolites15, carbonaceous materials16, and amine-supported silica17, have gained popularity over liquid absorbents because of their lower costs and higher adsorption capacities. However, the use of solid adsorbents such as MOFs and zeolites is limited by certain inherent drawbacks. Metal-Organic Frameworks (MOFs) often face stability issues when exposed to contaminated gases. Their structural integrity can be compromised by interactions with certain impurities in gas streams, which may result in degradation or even complete failure. To ensure the long-term durability of MOFs, it is essential to employ effective purification methods and maintain controlled environments18,19. The adsorption capacity of zeolites decreases significantly at 30 °C, despite their enhanced stability and suitability for gas adsorption. A high regeneration temperature is required to support the energy-intensive regeneration process20,21. These solid sorbents primarily capture CO2 through physisorption, mainly via van der Waals interactions22,23, which enhances the energy efficiency of regeneration. However, large-scale applications may face challenges in fully utilizing these sorbents due to the high cost associated with their synthesis and modification. Among the various solid adsorbents, carbonaceous materials are particularly environmentally favorable. In comparison to traditional solid adsorbents, biochar is characterized as an insoluble, stable, highly aromatic, and carbon-rich material24. The International Biochar Initiative (IBI) defines biochar as a carbon-rich material produced from biomass through a thermochemical decomposition process, usually pyrolysis, under low or limited oxygen conditions. Pyrolysis is the most common method, involving heating biomass in an oxygen-free environment at moderate to high temperatures. This process decomposes biomass into biochar, bio-oil, and syngas without combustion. These methods avoid direct combustion of biomass, instead relying on thermal decomposition in oxygen-deprived environments to yield biochar as a solid carbonaceous material21,25–27. The biomass used to produce biochar typically encompasses a variety of waste materials from agricultural sources, including wood chips, peanut shells, straw, and wood scraps, as well as industrial organic waste and urban sludge28. The primary constituents of biochar are carbon, hydrogen, oxygen, and nitrogen, with carbon making up more than 40% of the total elemental composition21. Biochar produced from a variety of raw materials and through different pyrolysis conditions typically displays unique physicochemical properties, including differences in pore structures, specific surface areas, surface oxygen-containing functional groups, and elemental compositions. Biochar has a unique surface structure that makes it a highly effective adsorbent for CO2. It also presents a promising alternative to traditional solid carbon-based catalysts, providing both economic and environmental benefits. Numerous studies have been conducted to improve the physical and chemical properties of raw biochar through various modification processes21, resulting in the creation of modified biochar that significantly improves its adsorption capacity. The properties of biochar can be enhanced through chemical and physical activation processes by optimizing factors, such as the type of activator, activation conditions, and the ratio of activator to precursor. Among the various activators, steam H₂O(g) is considered an environmentally friendly option that can increase pore size and create new pore structures within the biochar. However, using steam alone for activation makes it challenging to regulate the pore structure of biochar and its overall activation efficiency29. In contrast to disposable activators like KOH30, HNO331, and H3PO432, metal salt activators such as ZnCl233, FeCl334, and MgCl229 provide advantages including reduced corrosiveness, environmental friendliness, and reusability. Activated biochar is well-known for its exceptional durability and stability, often persisting for centuries to millennia. This enduring quality highlights its potential for significant applications in climate mitigation and soil enhancement. Moreover, employing chemical activation methods can further enhance these properties, making activated biochar a promising material for sustainable environmental initiatives. Moreover, metal salts can enhance biochar’s porosity and promote graphitization. Biochar is valued in various industries due to its high production capacity and versatility. It is used for various applications, including carbon dioxide capture35,36, water purification37, soil enhancement38, and catalysis37,39. Biochar is recognized as a promising technology for capturing, utilizing, and storing atmospheric carbon. Most techno-economic studies primarily focus on determining the production costs of biochar or evaluating its economic feasibility. However, they often overlook the carbon removal aspect, which has recently emerged as a new market and could serve as a significant revenue stream40. Biomass is an excellent resource for preparing carbon materials. Biomass generally refers to all types of organic materials, encompassing a wide range of plants, animals, and microorganisms. Examples include municipal organic solid waste, animal manure, and agricultural wastes41. Numerous studies have explored the conversion of biomass into carbon compounds up to this point. Biomass is decomposed into biochar, tar, and gas through pyrolysis. Biochar is recognized as a low-cost, environmentally friendly adsorbent material41. Currently, there is significant interest within the scientific community in improving the adsorption capacity of biochar through modifications to its structure and surface properties42. The product created by enhancing pristine biochar, known as unmodified or standard biochar, through physical, chemical, and biological methods to improve its physical, chemical, and biological characteristics, is referred to as modified biochar43. Corn is one of the most widely consumed and grown crops globally, playing a major role in food systems across various regions. It is cultivated extensively in many regions, including North America, Latin America, Sub-Saharan Africa, and parts of Asia. The United States is the leading producer, accounting for about 35–40% of the world’s corn production, primarily from the Midwest region known as the Corn Belt. China is also a major producer, contributing roughly 20–25% of global production, mainly in northeastern and northern provinces. Brazil holds a significant share as well, producing around 10–15%, with production centered in the central-west and southern regions. Other notable producers include Argentina, Mexico, India, and Ukraine, but their contributions are smaller in comparison44. Consequently, a significant amount of corncobs is discarded into the environment every day as agricultural waste. To the best of the author’s knowledge, there is very few research work on corn cob-based biochar as an adsorbent to capture CO2. We are therefore interested in using corncobs as a biochar adsorbent material to absorb CO2. In this study, we utilized agricultural waste corncob to synthesize biochar through the pyrolysis process for the adsorption of CO2. Following heat treatment, sodium and magnesium metal salts were incorporated into the biochar. The study investigated the CO2 uptake effectiveness of both metalized and pristine biochar. Physicochemical analysis techniques, including FTIR, XRD, SEM-EDX mapping, NMR, and XPS, were utilized to evaluate the adsorption mechanism. The biochar derived from corncobs exhibited effective CO2 removal, contributing to the creation of an environmentally friendly and cost-effective adsorbent for practical applications. We believe that the strategy developed in this study offers a novel and sustainable approach for the synthesis of economical porous carbon adsorbents.
What the sources say
- Not checked — no full text of the sourcecites [11] Creamer, A. E., Gao, B. & Zhang, M. Carbon dioxide capture using Biochar produced from sugarcane Bagasse and hickory wood. Chem. Eng. J. 249, 174–179. https://doi.org/10.1016/J.CEJ.2014.03.105 (2014). source
- Not checked — no full text of the sourcecites [12] Gęsikiewicz-Puchalska, A. et al. Improvement of CO2 uptake of biochars by treatment with mineral acids. Chem. Eng. J. 309, 159–171. https://doi.org/10.1016/J.CEJ.2016.10.005 (2017). source
- Partly supportedcites [13] Xie, Y., Wang, T. T., Liu, X. H., Zou, K. & Deng, W. Q. Capture and conversion of CO2 at ambient conditions by a conjugated microporous polymer. Nat. Commun. 4, 1960. https://doi.org/10.1038/ncomms2960 (2013). sourceExperimental — accuracy not yet measured
The paper’s Abstract says the industrial method of chemical CO2 sorption has high energy demands. It does not specifically identify liquid sorbents or state that the process has high heat demands. (LLM, conf=0.85)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“However, using steam alone for activation makes it challenging to regulate the pore structure of biochar and its overall activation efficiency29.”
§ Metals incorporated agricultural waste corn Cob-based biochar used as an adsorbent for CO2 capturing > Introduction Climate change represents a critical global challenge. In recent decades, emissions of greenhouse gases (GHGs), primarily carbon dioxide (CO2), methane (CH4), and nitrous oxide (N2O), have significantly contributed to global warming, an increasingly severe environmental issue1. Reports indicate that CO2 is the primary greenhouse gas responsible for this warming2. Since 1750, atmospheric CO2 levels have risen considerably and currently stand at 410 parts per million3. By the year 2100, CO2 concentrations are expected to reach 570 ppm, leading to an increase of 1.9 °C in mean temperatures, according to a report by the International Panel on Climate Change (IPCC) (IPCC 2014)3. The terrestrial environment would be significantly affected by these changes, resulting in extreme heat waves, severe droughts, altered rainfall patterns, melting glaciers, and rising sea levels4. The IPCC warns that if CO2 levels continue to rise, climate change will lead to widespread, severe, and irreversible consequences for both people and ecosystems5. The fifth IPCC assessment report emphasizes the necessity of developing sustainable techniques for CO2 capture and storage to mitigate CO2 emissions and combat global warming3. One of the most promising methods for reducing atmospheric CO2 is adsorption, which offers excellent stability, straightforward regeneration, and effective adsorption capabilities6–8. The key to advancing CO2 capture technology lies in the development of efficient adsorbents that demonstrate strong adsorption performance while being economically viable. In recent decades, extensive research has been conducted on both liquid and solid adsorbents. Among these, the traditional and most widely proven method for industrial CO2 capture is amine-based chemical absorption9. However, the cyclic process of CO2 absorption and regeneration in these amine solutions results in amine degradation. This degradation reduces the amine’s capacity to absorb CO2 and accelerates equipment corrosion10–12. Although liquid sorbents are generally more effective at capturing CO2, their associated drawbacks, along with the high heat and energy demands of the chemical CO2 absorption process11–13, highlight the need for the development of more efficient, non-corrosive sorbents with lower regeneration energy requirements. Additionally, a significant disadvantage of liquid sorbents is their potential to chemically react with other acidic gases present in the mixture, which may further limit the amount of active CO2 they can absorb. Solid adsorbents, including metal-organic frameworks (MOFs)14, zeolites15, carbonaceous materials16, and amine-supported silica17, have gained popularity over liquid absorbents because of their lower costs and higher adsorption capacities. However, the use of solid adsorbents such as MOFs and zeolites is limited by certain inherent drawbacks. Metal-Organic Frameworks (MOFs) often face stability issues when exposed to contaminated gases. Their structural integrity can be compromised by interactions with certain impurities in gas streams, which may result in degradation or even complete failure. To ensure the long-term durability of MOFs, it is essential to employ effective purification methods and maintain controlled environments18,19. The adsorption capacity of zeolites decreases significantly at 30 °C, despite their enhanced stability and suitability for gas adsorption. A high regeneration temperature is required to support the energy-intensive regeneration process20,21. These solid sorbents primarily capture CO2 through physisorption, mainly via van der Waals interactions22,23, which enhances the energy efficiency of regeneration. However, large-scale applications may face challenges in fully utilizing these sorbents due to the high cost associated with their synthesis and modification. Among the various solid adsorbents, carbonaceous materials are particularly environmentally favorable. In comparison to traditional solid adsorbents, biochar is characterized as an insoluble, stable, highly aromatic, and carbon-rich material24. The International Biochar Initiative (IBI) defines biochar as a carbon-rich material produced from biomass through a thermochemical decomposition process, usually pyrolysis, under low or limited oxygen conditions. Pyrolysis is the most common method, involving heating biomass in an oxygen-free environment at moderate to high temperatures. This process decomposes biomass into biochar, bio-oil, and syngas without combustion. These methods avoid direct combustion of biomass, instead relying on thermal decomposition in oxygen-deprived environments to yield biochar as a solid carbonaceous material21,25–27. The biomass used to produce biochar typically encompasses a variety of waste materials from agricultural sources, including wood chips, peanut shells, straw, and wood scraps, as well as industrial organic waste and urban sludge28. The primary constituents of biochar are carbon, hydrogen, oxygen, and nitrogen, with carbon making up more than 40% of the total elemental composition21. Biochar produced from a variety of raw materials and through different pyrolysis conditions typically displays unique physicochemical properties, including differences in pore structures, specific surface areas, surface oxygen-containing functional groups, and elemental compositions. Biochar has a unique surface structure that makes it a highly effective adsorbent for CO2. It also presents a promising alternative to traditional solid carbon-based catalysts, providing both economic and environmental benefits. Numerous studies have been conducted to improve the physical and chemical properties of raw biochar through various modification processes21, resulting in the creation of modified biochar that significantly improves its adsorption capacity. The properties of biochar can be enhanced through chemical and physical activation processes by optimizing factors, such as the type of activator, activation conditions, and the ratio of activator to precursor. Among the various activators, steam H₂O(g) is considered an environmentally friendly option that can increase pore size and create new pore structures within the biochar. However, using steam alone for activation makes it challenging to regulate the pore structure of biochar and its overall activation efficiency29. In contrast to disposable activators like KOH30, HNO331, and H3PO432, metal salt activators such as ZnCl233, FeCl334, and MgCl229 provide advantages including reduced corrosiveness, environmental friendliness, and reusability. Activated biochar is well-known for its exceptional durability and stability, often persisting for centuries to millennia. This enduring quality highlights its potential for significant applications in climate mitigation and soil enhancement. Moreover, employing chemical activation methods can further enhance these properties, making activated biochar a promising material for sustainable environmental initiatives. Moreover, metal salts can enhance biochar’s porosity and promote graphitization. Biochar is valued in various industries due to its high production capacity and versatility. It is used for various applications, including carbon dioxide capture35,36, water purification37, soil enhancement38, and catalysis37,39. Biochar is recognized as a promising technology for capturing, utilizing, and storing atmospheric carbon. Most techno-economic studies primarily focus on determining the production costs of biochar or evaluating its economic feasibility. However, they often overlook the carbon removal aspect, which has recently emerged as a new market and could serve as a significant revenue stream40. Biomass is an excellent resource for preparing carbon materials. Biomass generally refers to all types of organic materials, encompassing a wide range of plants, animals, and microorganisms. Examples include municipal organic solid waste, animal manure, and agricultural wastes41. Numerous studies have explored the conversion of biomass into carbon compounds up to this point. Biomass is decomposed into biochar, tar, and gas through pyrolysis. Biochar is recognized as a low-cost, environmentally friendly adsorbent material41. Currently, there is significant interest within the scientific community in improving the adsorption capacity of biochar through modifications to its structure and surface properties42. The product created by enhancing pristine biochar, known as unmodified or standard biochar, through physical, chemical, and biological methods to improve its physical, chemical, and biological characteristics, is referred to as modified biochar43. Corn is one of the most widely consumed and grown crops globally, playing a major role in food systems across various regions. It is cultivated extensively in many regions, including North America, Latin America, Sub-Saharan Africa, and parts of Asia. The United States is the leading producer, accounting for about 35–40% of the world’s corn production, primarily from the Midwest region known as the Corn Belt. China is also a major producer, contributing roughly 20–25% of global production, mainly in northeastern and northern provinces. Brazil holds a significant share as well, producing around 10–15%, with production centered in the central-west and southern regions. Other notable producers include Argentina, Mexico, India, and Ukraine, but their contributions are smaller in comparison44. Consequently, a significant amount of corncobs is discarded into the environment every day as agricultural waste. To the best of the author’s knowledge, there is very few research work on corn cob-based biochar as an adsorbent to capture CO2. We are therefore interested in using corncobs as a biochar adsorbent material to absorb CO2. In this study, we utilized agricultural waste corncob to synthesize biochar through the pyrolysis process for the adsorption of CO2. Following heat treatment, sodium and magnesium metal salts were incorporated into the biochar. The study investigated the CO2 uptake effectiveness of both metalized and pristine biochar. Physicochemical analysis techniques, including FTIR, XRD, SEM-EDX mapping, NMR, and XPS, were utilized to evaluate the adsorption mechanism. The biochar derived from corncobs exhibited effective CO2 removal, contributing to the creation of an environmentally friendly and cost-effective adsorbent for practical applications. We believe that the strategy developed in this study offers a novel and sustainable approach for the synthesis of economical porous carbon adsorbents.
What the sources say
- Partly supportedcites [29] Tian, W. et al. Amine-Modified Biochar for the efficient adsorption of carbon dioxide in flue gas. Atmosphere 13 (4), 579. https://doi.org/10.3390/atmos13040579 (2022). sourceExperimental — accuracy not yet measured
The Introduction says that using only steam makes it difficult to control biochar’s pore structure and activation rate. It does not make the same claim about overall activation efficiency; rate and efficiency are different properties. No page number is available in our copy. (LLM, conf=0.86)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Partly supported
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“High carbonization temperatures (700–900 °C) promote thermal decomposition of the organic biomass structures, resulting in biochar with increased carbon content, greater aromaticity, and improved stability.”
§ Metals incorporated agricultural waste corn Cob-based biochar used as an adsorbent for CO2 capturing > Experimental > Biochar production using corn cobs The corn cobs were collected from the local market in Rajshahi, Bangladesh. The collected corn cobs were washed and then cut into small pieces. The pieces of corn cobs were dried in the sunlight for 20 to 25 days. In biomass pyrolysis, the first stage involves the evaporation of water. The second stage involves the decomposition of hemicellulose. As the reaction temperature increases, cellulose is broken down. Finally, lignin undergoes decomposition. The pieces of corn cobs were immersed in a water bath to wash with hot double-distilled (60 °C) water (100 g/L) for two hours, with vigorous stirring, to remove alkaline materials, which reduced the catalytic effect on the conversion process. After that, Oven drying at 105 °C for approximately 24 h ensures complete dryness and moisture removal without overheating, making it a common and effective practice. These operating conditions effectively dry the corn cob samples after washing to eliminate residual moisture, preserving the material condition for subsequent processes like pyrolysis conversion, while preventing catalytic effects from alkali materials45. The sample was then impregnated by soaking in aqueous solutions of H2SO4 (100 g for 0.5 L) for three hours with stirring. The corn cob that was impregnated was washed with deionized water, dried in an oven at 105 °C for 4 h, and then carbonized at 800 °C for 4 h in a muffle furnace, at a rate of 20 °C/min with many studies using around 10 °C/min as a common heating rate46. The rate of 10 °C/min is slow enough to allow controlled pyrolysis and formation of porous biochar without rapid structural collapse. The rate of 20 °C/min would be a suitable specification for the heating rate during carbonization at 800 °C for 4 h after drying. High carbonization temperatures (700–900 °C) promote thermal decomposition of the organic biomass structures, resulting in biochar with increased carbon content, greater aromaticity, and improved stability. This reduces volatile matter and increases fixed carbon, enhancing biochar’s structural integrity and adsorption capacity. At 800 °C, biochar typically develops a higher surface area and porosity compared to lower temperatures, which is critical to adsorption applications. This temperature balances maximizing porosity development and carbon content while controlling excessive burn-off. The sulfuric acid impregnation preceding carbonization facilitates dehydration and charring reactions, improving the formation of porous carbon structures under these high temperatures47,48. Activation at 900 °C follows carbonization to further enhance surface area and porosity by physically or chemically activating the biochar structure. Carbonization at 800 °C creates a stable precursor optimized for this activation stage. Overall, 800 °C carbonization achieves a stable, carbon-rich biochar with a quality porous structure, which is then further enhanced by activation at 900 °C49. For chemical activation, carbon was soaked in liquid KOH with a concentration of 50% for 2 h21,50. The KOH solution is used to activate micropores and mesopores of activated carbon and neutralize the excess H2SO4 on the sample. After that, the sample was thoroughly washed and dried. The pyrolysis temperature was set at 900 °C for 2 h to produce corn cob-based biochar32,51–54. In the pyrolysis process, the sample heating rate was 20 °C /min confined within oxygen limits for 2 h, and then the sample was taken at ambient temperature. After that, the sample was ground to the desired particle sizes by sieving. Then, the product was dried and placed in a desiccator for later use. To prepare metal-incorporated biochar, metals were loaded into the biochar structure through a wet impregnation technique, followed by heat treatment. Following the heat treatment, the incorporation of sodium and magnesium metal salts into biochar typically involves thermal modification, such as high-temperature treatment (e.g., 500–900 °C range). This thermal process helps activate the biochar and enhances its physicochemical properties, such as porosity and surface area, making it more effective for adsorption and metal incorporation55. There was no explicit mention of using chemical modification to incorporate sodium and magnesium salts after heat treatment. Instead, the term “heat treatment” in the context of biochar preparation generally refers to thermal processes. The metal salts are often impregnated into the biochar matrix through this thermal method to improve performance for applications like adsorption56. The metal nitrate salts used in this process included sodium nitrate (NaNO3) and magnesium nitrate hexahydrate [Mg(NO3)2·6H2O]. These salts were dissolved in 80 mL of deionized water to achieve specific concentrations, resulting in 5% metal solutions. Each solution contained one gram of biochar, which was agitated continuously for 12 h. After mixing, the solutions were filtered, and the remaining material was dried in an oven at 105 °C for 2 h. Metalized biochar is produced by heating biochar to 500 °C for 15 min, followed by the introduction of CO2 to enhance its capture efficiency. The resulting biochar was then set aside for subsequent CO2 capture experiments57–59. As shown in Fig. 1, the schematic diagram of the experimental setup for this investigation. The experimental condition for CO2 passing through each sample was a flow rate of 5 L/min, a pressure of 1000 lb/in², and a time duration of 1 min. The preparation of metal-incorporated biochar using magnesium nitrate and sodium nitrate salts can enhance CO2 adsorption capabilities. This biochar was treated with magnesium salt due to its superior adsorption potential. In contrast, as shown by Eqs. (1) and (2), magnesium nitrate decomposes into magnesium oxide through a two-stage process. It is essential to allow a sufficient time for magnesium nitrate to transform into its oxide form, as this process begins at approximately 400 °C60.
What the sources say
- Partly supportedcites [47] Anukam, A. I., Goso, B. P., Okoh, O. O. & Mamphweli, S. N. Studies on characterization of corn Cob for application in a gasification process for energy production. J. Chem. 2017 (1), 9 https://doi.org/10.1155/2017/6478389 (2017). sourceExperimental — accuracy not yet measured
Section 3.6 (page unavailable) reports that heating decomposes corn cob’s organic components and that degradation at higher temperatures produces carbonized biomass. It does not establish the specified 700–900 °C range or show that the resulting biochar has increased carbon content, greater aromaticity, or improved stability. (LLM, conf=0.86)
- Partly supportedcites [48] Selvarajoo, A. Slow pyrolysis of durio zibethinus rind and the influence of carbonization temperature on Biochar properties. IOP Conf. Ser. : Mater. Sci. Eng. 1092, 012042. https://doi.org/10.1088/1757-899X/1092/1/012042 (2021). sourceExperimental — accuracy not yet measured
Section 3.2 reports that durian-rind biochar’s carbon content increased as the carbonization temperature rose from 300 to 700 °C. Section 3.3 reports some continued structural decomposition above 350 °C, but only slight further weight loss above 600 °C. The paper did not carbonize biochar at 900 °C or establish greater aromaticity or improved stability. (LLM, conf=0.89)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Partly supported
52 more claims · 8 with their cited sources checked
Create a free account to see all 99 claims and to verify the 1 reference still open.
- Probably not a substantial claim. 28
- It may state two separate claims as one. 22
- The quote only partly states this claim. 1
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Each contradiction between two passages listed here was confirmed by an independent check.
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ Metals incorporated agricultural waste corn Cob-based biochar used as an adsorbent for CO2 capturing > Experimental > Biochar production using corn cobs
“Sodium nitrate (NaNO3) incorporated into biochar undergoes thermal decomposition at temperatures starting around 550 °C. This decomposition occurs in two steps. First, sodium nitrate (NaNO3) is converted to sodium nitrite (NaNO2), and then sodium nitrite further decomposes into sodium oxide (Na2O).”
§ Metals incorporated agricultural waste corn Cob-based biochar used as an adsorbent for CO2 capturing > Experimental > Biochar production using corn cobs
“3\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\text{NaNO}}_{{{\text{3}}~~}} ~ \to ~{\text{NaNO}}_{{\text{2}}} ~ \to ~{\text{NaO}}_{{\text{2}}}$$\end{document}”
Citations
Cites
Preparation, modification and environmental application of biochar: A review
Wang, J., & Wang, S. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.04.282 · Cited by 2,345
Mohan, D., Sarswat, A., Ok, Y. S., & Pittman, C. U. (2014) · Bioresource Technology · doi:10.1016/j.biortech.2014.01.120 · Cited by 2,313
Kambo, H. S., & Dutta, A. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.01.050 · Cited by 1,746
A Review of CO2 Capture by Absorption and Adsorption
Yu, C.-H., Huang, C.-H., & Tan, C.-S. (2012) · Aerosol and Air Quality Research · doi:10.4209/aaqr.2012.05.0132 · Cited by 1,730
Rajapaksha, A. U., Chen, S. S., Tsang, D. C. W., Zhang, M., Vithanage, M., Mandal, S., Gao, B., Bolan, N. S., & Ok, Y. S. (2016) · Chemosphere · doi:10.1016/j.chemosphere.2016.01.043 · Cited by 1,322
Characterisation and evaluation of biochars for their application as a soil amendment
Singh, B., Singh, B. P., & Cowie, A. L. (2010) · Soil Research · doi:10.1071/sr10058 · Cited by 991
Amine-Based CO2 Capture Technology Development from the Beginning of 2013—A Review
Dutcher, B., Fan, M., & Russell, A. G. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/am507465f · Cited by 981
Biochar technology in wastewater treatment: A critical review
Xiang, W., Zhang, X., Chen, J., Zou, W., He, F., Hu, X., Tsang, D. C. W., Ok, Y. S., & Gao, B. (2020) · Chemosphere · doi:10.1016/j.chemosphere.2020.126539 · Cited by 884
Capture and conversion of CO2 at ambient conditions by a conjugated microporous polymer
Xie, Y., Wang, T.-T., Liu, X.-H., Zou, K., & Deng, W.-Q. (2013) · Nature Communications · doi:10.1038/ncomms2960 · Cited by 772
Biochar Amendment Improves Crop Production in Problem Soils: A Review
Yu, H., Zou, W., Chen, J., Chen, H., Yu, Z., Huang, J., Tang, H., Wei, X., & Gao, B. (2019) · Journal of Environmental Management · doi:10.1016/j.jenvman.2018.10.117 · Cited by 675
Research works printed but not linked: 1
- Zhang, C. et al. The application of Biochar for CO2 capture: influence of Biochar Preparation and CO2 capture reactors. Ind. Eng. Chem. Res. 62 (42), 17168–17181. https://doi.org/10.1021/acs.iecr.3c00445 (2023). · DOI · Paper page
Cited by
Hossain, M. S., Karim, M. A., & Dipti, S. S. (2026) · RSC Advances · doi:10.1039/d6ra00494f · Cited by 3
Self-citationKulshreshtha, N., & Sandhwar, V. K. (2026) · Chemical Papers · doi:10.1007/s11696-026-05202-9
From Agricultural Waste to Functional Materials: Modified Carbonaceous Adsorbents From Corn Biomass
Gil, M., Wawrzyniak, A., & Nowicki, P. (2026) · ChemPhysChem · doi:10.1002/cphc.70497
Barboza, M. E. A., Barboza, J. A. T., Fernandez, M. A. M., & Ferreira, G. M. D. (2026) · ACS Omega · doi:10.1021/acsomega.6c05829
Metadata
- Authors
- Ahmed, S., Hossain, D., Dipti, S. S., Karim, M. A., & Azad, M. A. K.
- Affiliations
- University of Rajshahi (BD)
- Corresponding author
- Karim, Md. Anwarul
- Venue
- Scientific Reports
- Published
- 2025-12-07
- Volume
- 16
- Issue
- 1
- Pages
- 1470-1470
- ISSN
- 2045-2322 (ISSN-L)
- PMC
- PMC12796349
- OpenAlex
- W4417091928
- Cited by
- 4
- References
- 94
- Citations by year
- 2026: 4
- FWCI
- 1.16
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- cc-by-nc-nd
- creativecommons.org/licenses/by-nc-nd/4.0 (tdm)
- creativecommons.org/licenses/by-nc-nd/4.0 (vor, 36 d)
- Locations
- Scientific Reports (publishedVersion, cc-by-nc-nd)
- Research Square (acceptedVersion, cc-by)
- PubMed (publishedVersion)
- PubMed Central (publishedVersion, cc-by-nc-nd)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- Faculty of Engineering, University of Rajshahi, Bangladesh (Ref.no. A-40/5/52/RU/Eng. -13 /2022-2023 & Ref. No. A-1037/5/52/RU/Engg. -13 /2022-2023].)
- Topics
- Physical Sciences › Chemical Engineering › Filtration and Separation › Carbon Dioxide Capture Technologies
- Physical Sciences › Energy › Fuel Technology › Thermochemical Biomass Conversion Processes
- Physical Sciences › Environmental Science › Water Science and Technology › Adsorption and biosorption for pollutant removal
- Keywords
- CO2 capture, biochar, corn cob, agricultural waste, metal incorporation, magnesium, sodium, pyrolysis, CO2 adsorption, metal oxide impregnation, point of zero charge, adsorption capacity
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-11, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-11 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Metals incorporated agricultural waste corn Cob-based biochar used as an adsorbent for CO2 capturing. https://app.cochat.ai/papers/10.1038/s41598-025-31699-3
- The paper
- Ahmed, S., Hossain, D., Dipti, S. S., Karim, M. A., & Azad, M. A. K. (2025). Metals incorporated agricultural waste corn Cob-based biochar used as an adsorbent for CO2 capturing. Scientific Reports. https://doi.org/10.1038/s41598-025-31699-3
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.