The DOI matches its Crossref record.
Adsorption of Arsenate and Arsenite by Iron-Treated Activated Carbon and Zeolites: Effects of pH, Temperature, and Ionic Strength
Abstract
Naturally occurring arsenic contaminates groundwater in many countries, including the United States, at levels greater than 10 microg l(-1), the current WHO guideline value, increasing the risk of skin, lung, bladder, and kidney cancer in millions of people. Arsenic toxicity is dependent on its chemical form; arsenite is more toxic due to its higher affinity for protein than arsenate. This study supports worldwide research efforts to obtain drinking water with arsenic levels below 10 microg l(-1). Batch adsorption kinetic and isotherm studies were conducted to compare and evaluate iron-treated adsorbents for arsenate and arsenite removal from aqueous media. Two iron treatments were investigated as well as the effects of varied pH, temperature, and ionic strength increases on adsorption effectiveness. Adsorbent materials such as activated carbon and naturally occurring zeolites (clinoptilolite and chabazite) were selected because of their relative low cost and because the zeolites are potential point-of-use materials for mitigating arsenic contaminated groundwater. Molecular sieves, Faujasite (13X) and Linde type A (5A) were selected because they provide a basis for comparison with previous studies and represent well-characterized materials. Iron-treated activated carbon and chabazite showed the most promise as low-cost arsenic adsorbents; activated carbon removed approximately 60% of arsenate and arsenite while chabazite removed approximately 50% of arsenate and 30% of arsenite. Modeling arsenate and arsenite adsorption by these adsorbents using the Langmuir and Freundlich isotherm expressions determined the adsorbents' capacity for arsenic removal from aqueous media. Arsenate removal by iron-treated activated carbon and clinoptilolite best fit the Langmuir model. Arsenate removal by iron-treated chabazite and arsenite removal by activated carbon, chabazite, and clinoptilolite best fit the Freundlich model. Applications of iron-modified activated carbon for effective arsenate removal would require pH values between 7 and 11, chabazite between 4 and 5, and clinoptilolite between 3 and 7. Arsenite removal by iron-modified activated carbon would require pH values between 7 and 11, chabazite between 7 and 10, and clinoptilolite between 4 and 11. Increasing temperature improved adsorption performance for activated carbon and the zeolites. Increasing ionic strength improved performance of iron-treated activated carbon and zeolites.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Arsenic removal from water/wastewater using adsorbents—A critical review
Mohan, D., & Pittman, C. U. (2007) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2007.01.006 · Cited by 3,536
Manganese oxide-modified biochars: Preparation, characterization, and sorption of arsenate and lead
Wang, S., Gao, B., Li, Y., Mosa, A., Zimmerman, A. R., Ma, L. Q., Harris, W. G., & Migliaccio, K. W. (2015) · Bioresource Technology · doi:10.1016/j.biortech.2015.01.044 · Cited by 403
Mondal, P., Bhowmick, S., Chatterjee, D., Figoli, A., & Van der Bruggen, B. (2013) · Chemosphere · doi:10.1016/j.chemosphere.2013.01.097 · Cited by 327
Samsuri, A. W., Sadegh-Zadeh, F., & Seh-Bardan, B. J. (2013) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2013.08.009 · Cited by 321
Lin, L., Qiu, W., Wang, D., Huang, Q., Song, Z., & Chau, H. W. (2017) · Ecotoxicology and Environmental Safety · doi:10.1016/j.ecoenv.2017.06.063 · Cited by 258
Metadata
- Authors
- Payne, K., & Abdel-Fattah, T.
- Venue
- Journal of Environmental Science and Health, Part A
- Publisher
- Informa UK Limited
- Published
- 2005-03-09
- Volume
- 40
- Issue
- 4
- Pages
- 723-749
- ISSN
- 1093-4529 (ISSN-L)
- OpenAlex
- W2110275894
- Cited by
- 213
- References
- 0
- FWCI
- 2.98
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Adsorption of Arsenate and Arsenite by Iron-Treated Activated Carbon and Zeolites: Effects of pH, Temperature, and Ionic Strength. https://app.cochat.ai/papers/10.1081/ese-200048254
- The paper
- Payne, K., & Abdel-Fattah, T. (2005). Adsorption of Arsenate and Arsenite by Iron-Treated Activated Carbon and Zeolites: Effects of pH, Temperature, and Ionic Strength. Journal of Environmental Science and Health, Part A. https://doi.org/10.1081/ese-200048254
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.