The DOI matches its Crossref record; 31 of the 31 references it cites were found in a registry or an index.
Extractive Distillation: A Review
Abstract
Extractive distillation is more and more commonly applied in industry, and becomes an important separation method in chemical engineering. This paper provides an in‐depth review for extractive distillation. Separation sequence of the columns, combination with other separation processes, tray configuration and operation policy are included in process of extractive distillation. Since the solvent plays an important role in the design of extractive distillation, such conventional and novel separating agents as solid salt, liquid solvent, the combination of liquid solvent and solid salt, and ionic liquid are concerned. The prominent characteristics of extractive distillation is that one new solvent with high boiling‐point, i.e. separating agent, is added to the components to be separated, so as to increase their relative volatility. Selection of a suitable solvent is fundamental to ensure an effective and economical design. CAMD as a useful tool is applied for screening the solvents and thus reducing the experimental work. Theories from molecular thermodynamics, which can interpret the microscale mechanism of selecting the solvents, are also collected. To accurately describe the extractive distillation process, mathematical model is necessary. There are two types of mathematical models to simulate extractive distillation process, i.e. equilibrium (EQ) stage model and non‐equilibrium (NEQ) stage model. The EQ stage model as an old method is widely used, but the NEQ stage model should be pay more attention. In the end comparison of extractive distillation and adsorption distillation, both of which belong to special distillation suitable for separating close boiling point or azeotropic components, is done, and it is shown that extractive distillation is more advantageous.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The Properties of Gases and Liquids
Reid, R. C., Sherwood, T. K., & Street, R. E. (1959) · Physics Today · doi:10.1063/1.3060771 · Cited by 14,143
Room-Temperature Ionic Liquids: Solvents for Synthesis and Catalysis. 2
Hallett, J. P., & Welton, T. (2011) · Chemical Reviews · doi:10.1021/cr1003248 · Cited by 12,578
Room-Temperature Ionic Liquids. Solvents for Synthesis and Catalysis
Welton, T. (1999) · Chemical Reviews · doi:10.1021/cr980032t · Cited by 11,852
Klamt, A. (1995) · The Journal of Physical Chemistry · doi:10.1021/j100007a062 · Cited by 4,118
The properties of gases and liquids
Kobe, K. A. (1959) · Journal of Chemical Education · doi:10.1021/ed036p154.4 · Cited by 2,761
ESTIMATION OF PURE-COMPONENT PROPERTIES FROM GROUP-CONTRIBUTIONS
JOBACK, K. G., & REID, R. C. (1987) · Chemical Engineering Communications · doi:10.1080/00986448708960487 · Cited by 1,965
Refinement and Parametrization of COSMO-RS
Klamt, A., Jonas, V., Bürger, T., & Lohrenz, J. C. W. (1998) · The Journal of Physical Chemistry A · doi:10.1021/jp980017s · Cited by 1,942
(1999) · Choice Reviews Online · doi:10.5860/choice.36-5112 · Cited by 1,774
The Maxwell-Stefan approach to mass transfer
Krishna, R., & Wesselingh, J. A. (1997) · Chemical Engineering Science · doi:10.1016/s0009-2509(96)00458-7 · Cited by 1,572
COSMO-RS: a novel and efficient method for the a priori prediction of thermophysical data of liquids
Klamt, A., & Eckert, F. (2000) · Fluid Phase Equilibria · doi:10.1016/s0378-3812(00)00357-5 · Cited by 1,287
Cited by
Bioethanol Production from Renewable Raw Materials and its Separation and Purification: a Review
University of Zagreb, F. O. F. T. A. B., Bušić, A., Marđetko, N., University of Zagreb, F. O. F. T. A. B., Kundas, S., Belarussian National Technical University, P. P. C. A. E. S. F., Morzak, G., Belarussian National Technical University, M. E. A. E. E. F., Belskaya, H., Belarussian National Technical University, M. E. A. E. E. F., et al. (2018) · Food Technology and Biotechnology · doi:10.17113/ftb.56.03.18.5546 · Cited by 610
Recent membrane development for pervaporation processes
Ong, Y. K., Shi, G. M., Le, N. L., Tang, Y. P., Zuo, J., Nunes, S. P., & Chung, T.-S. (2016) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2016.02.003 · Cited by 597
Extraction of organic compounds with room temperature ionic liquids
Poole, C. F., & Poole, S. K. (2010) · Journal of Chromatography A · doi:10.1016/j.chroma.2009.09.011 · Cited by 493
Ionic liquids in separations of azeotropic systems – A review
Pereiro, A. B., Araújo, J. M. M., Esperança, J. M. S. S., Marrucho, I. M., & Rebelo, L. P. N. (2012) · The Journal of Chemical Thermodynamics · doi:10.1016/j.jct.2011.05.026 · Cited by 464
Ionic Liquids in Chemical Engineering
Werner, S., Haumann, M., & Wasserscheid, P. (2010) · Annual Review of Chemical and Biomolecular Engineering · doi:10.1146/annurev-chembioeng-073009-100915 · Cited by 373
Metadata
- Authors
- Lei, Z., Li, C., & Chen, B.
- Venue
- Separation & Purification Reviews
- Publisher
- Informa UK Limited
- Published
- 2003-01-12
- Volume
- 32
- Issue
- 2
- Pages
- 121-213
- ISSN
- 1542-2119 (ISSN-L)
- 1542-2127
- OpenAlex
- W1968635009
- Cited by
- 449
- References
- 31
- FWCI
- 8.26
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Extractive Distillation: A Review. https://app.cochat.ai/papers/10.1081/spm-120026627
- The paper
- Lei, Z., Li, C., & Chen, B. (2003). Extractive Distillation: A Review. Separation & Purification Reviews. https://doi.org/10.1081/spm-120026627
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.