The DOI matches its Crossref record.
Biosorption of Cadmium, Lead, Mercury, and Arsenic Ions by the Fungus Penicillium purpurogenum
Abstract
The potential use of the fungus Penicillium purpurogenum to remove cadmium, lead, mercury, and arsenic ions from aqueous solutions was evaluated. Biosorption of heavy metal ions reached equilibrium in 4 h. Heavy metal ions binding by Penicillium purpurogenum was clearly pH dependent. Heavy metal loading capacity increased with increasing pH under acidic conditions, presumably as a function of heavy metal speciation and due to the H+ competition at the same binding sites. The adsorption of heavy metal ions reached a plateau value at around pH 5.0. The maximum adsorption capacities of heavy metal ions onto the fungal biomass under noncompetitive conditions were 35.6 mg/g for As(III), 70.4 mg/g for Hg(II), 110.4 mg/g for Cd(II) and 252.8 mg/g for Pb(II). Their adsorption behavior can be described at least approximately with the Langmuir equation. The competitive adsorption capacities of the heavy metal ions were 3.4 mg/g for As(III), 15.8 mg/g for Hg(II), 13.1 mg/g for Cd(II), and 41.8 mg/g for Pb(II) at 50 mmol/L initial concentration of metal ions. The same affinity order on a molar basis was observed under noncompetitive and competitive adsorption conditions, which was as follows: Pb(II)>Cd(II)>Hg(II)>As(III). The equilibrium loading capacity of Pb(II) was greater than that of other metal ions. This fungal biomass showed a preference for binding Pb(II) over Cd(II), Hg(II), and As(III). Elution of heavy metal ions was performed using 0.5 M HCl. The fungus Penicillium purpurogenum could be used for ten cycles for biosorption.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Arsenic removal from water/wastewater using adsorbents—A critical review
Mohan, D., & Pittman, C. U. (2007) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2007.01.006 · Cited by 3,536
Biosorbents for heavy metals removal and their future
Wang, J., & Chen, C. (2009) · Biotechnology Advances · doi:10.1016/j.biotechadv.2008.11.002 · Cited by 2,727
Adsorption of a few heavy metals on natural and modified kaolinite and montmorillonite: A review
Bhattacharyya, K. G., & Gupta, S. S. (2008) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2007.12.008 · Cited by 1,525
Dhankhar, R., & Hooda, A. (2011) · Environmental Technology · doi:10.1080/09593330.2011.572922 · Cited by 428
Application of Biosorption for Removal of Heavy Metals from Wastewater
Kanamarlapudi, S. L. R. K., Chintalpudi, V. K., & Muddada, S. (2018) · Biosorption · doi:10.5772/intechopen.77315 · Cited by 351
Use of (modified) natural adsorbents for arsenic remediation: A review
Asere, T. G., Stevens, C. V., & Du Laing, G. (2019) · Science of The Total Environment · doi:10.1016/j.scitotenv.2019.04.237 · Cited by 339
Metadata
- Authors
- Say, R., Yılmaz, N., & Denizli, A.
- Venue
- Separation Science and Technology
- Publisher
- Informa UK Limited
- Published
- 2003-01-05
- Volume
- 38
- Issue
- 9
- Pages
- 2039-2053
- ISSN
- 0149-6395 (ISSN-L)
- 1520-5754
- OpenAlex
- W2040486364
- Cited by
- 184
- References
- 0
- FWCI
- 2.98
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.