Removal of Cr(VI) and Hg(II) from Aqueous Solutions Using Fly Ash and Impregnated Fly Ash
The DOI matches its Crossref record.
Abstract
The potential of impregnated fly ash (IFA), as low‐cost adsorbent, was evaluated for the removal of Cr(VI) and Hg(II) from aqueous solutions by using batch equilibration technique. Effect of various physicochemical parameters such as initial concentration, contact time, temperature, and pH on the adsorption was investigated in order to optimize the conditions for adsorption. IFA showed enhanced tendency for adsorption. Adsorption efficiency was found to be dependent on the initial concentration and the adsorption behavior followed the Langmuir adsorption model. The adsorption capacity (Q 0) of FA, IFAAl, and IFAFe for Cr(VI) was found to be 1.379, 1.820, and 1.667 mg g−1 and that of Hg(II) was 11.00, 12.50, and 13.40 mg g−1. Rate constants were evaluated in terms of a first‐order kinetic model. Thermodynamic parameters such as free energy (ΔG°), enthalpy (ΔH°), and entropy (ΔS°) for the adsorption process were calculated. The adsorption was found to be endothermic in both the cases.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
A review on the utilization of fly ash
Ahmaruzzaman, M. (2010) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2009.11.003 · Cited by 2,641
Activated carbons and low cost adsorbents for remediation of tri- and hexavalent chromium from water
Mohan, D., & Pittman Jr., C. U. (2006) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2006.06.060 · Cited by 1,855
“4 [179] Fly ash impregnated with aluminum 2.”
BackgroundApplication of layered double hydroxides for removal of oxyanions: A review
Goh, K.-H., Lim, T.-T., & Dong, Z. (2008) · Water Research · doi:10.1016/j.watres.2007.10.043 · Cited by 1,708
Adsorption of a few heavy metals on natural and modified kaolinite and montmorillonite: A review
Bhattacharyya, K. G., & Gupta, S. S. (2008) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2007.12.008 · Cited by 1,525
Kinetics of adsorption of metal ions on inorganic materials: A review
Sen Gupta, S., & Bhattacharyya, K. G. (2011) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2010.12.004 · Cited by 901
Ahmaruzzaman, M. (2011) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2011.04.005 · Cited by 755
Fast removal of copper ions by gum arabic modified magnetic nano-adsorbent
Banerjee, S. S., & Chen, D.-H. (2007) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2007.01.079 · Cited by 510
Self-citationEnvironmental-benign utilisation of fly ash as low-cost adsorbents
WANG, S., & WU, H. (2006) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2006.01.067 · Cited by 497
Gupta, S., & Babu, B. V. (2009) · Chemical Engineering Journal · doi:10.1016/j.cej.2009.01.013 · Cited by 461
Industrial solid waste for heavy metals adsorption features and challenges; a review
Soliman, N. K., & Moustafa, A. F. (2020) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2020.07.045 · Cited by 403
Removal of hexavalent chromium from aqueous solution using polypyrrole-polyaniline nanofibers
Bhaumik, M., Maity, A., Srinivasu, V. V., & Onyango, M. S. (2012) · Chemical Engineering Journal · doi:10.1016/j.cej.2011.11.088 · Cited by 401
Belviso, C. (2018) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2017.10.004 · Cited by 387
Silica coated magnetite particles for magnetic removal of Hg2+ from water
Girginova, P. I., Daniel-da-Silva, A. L., Lopes, C. B., Figueira, P., Otero, M., Amaral, V. S., Pereira, E., & Trindade, T. (2010) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2010.01.087 · Cited by 363
GracePavithra, K., Jaikumar, V., Kumar, P. S., & SundarRajan, P. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.04.117 · Cited by 361
Younas, F., Mustafa, A., Farooqi, Z. U. R., Wang, X., Younas, S., Mohy-Ud-Din, W., Ashir Hameed, M., Mohsin Abrar, M., Maitlo, A. A., Noreen, S., et al. (2021) · Water · doi:10.3390/w13020215 · Cited by 335
Opportunities and challenges in the use of coal fly ash for soil improvements – A review
Shaheen, S. M., Hooda, P. S., & Tsadilas, C. D. (2014) · Journal of Environmental Management · doi:10.1016/j.jenvman.2014.07.005 · Cited by 321
Adsorption of heavy metal ions from aqueous solution by fly ash
Alinnor, I. J. (2007) · Fuel · doi:10.1016/j.fuel.2006.08.019 · Cited by 274
ZHOU, Y.-F., & HAYNES, R. J. (2010) · Critical Reviews in Environmental Science and Technology · doi:10.1080/10643380802586857 · Cited by 241
“, 1989) and that adsorption can be described by Langmuir and Freundlich equations (Agrawal et al., 2004; Banerjee et al., 2005; Cetin & Pehlivan, 2007; Cho et al., 2005) (see Table 2).”
BackgroundInfluentialCELLULOSIC SUBSTRATES FOR REMOVAL OF POLLUTANTS FROM AQUEOUS SYSTEMS: A REVIEW. 2. DYES
Hubbe, M. A., Beck, K. R., O'Neal, W. G., & Sharma, Y. C. (2012) · BioResources · doi:10.15376/biores.7.2.2592-2687 · Cited by 199
Metadata
- Authors
- Banerjee, S. S., Joshi, M. V., & Jayaram, R. V.
- Venue
- Separation Science and Technology
- Publisher
- Informa UK Limited
- Published
- 2005-01-02
- Volume
- 39
- Issue
- 7
- Pages
- 1611-1629
- ISSN
- 0149-6395 (ISSN-L)
- 1520-5754
- OpenAlex
- W2077120172
- Cited by
- 107
- References
- 0
- FWCI
- 2.55
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.