Geodetic techniques for time and frequency comparisons using GPS phase and code measurements
Open accessThe DOI matches its Crossref record.
Abstract
We review the development and status of GPS geodetic methods for high-precision global time and frequency comparisons. A comprehensive view is taken, including hardware effects in the transmitting satellites and tracking receiver stations, data analysis and interpretation, and comparisons with independent results. Other GPS techniques rely on single-frequency data and/or assume cancellation of most systematic errors using differences between simultaneous observations. By applying the full observation modelling of modern geodesy to dual-frequency observations of GPS carrier phase and pseudorange, the precision of timing comparisons can be improved from the level of several nanoseconds to near 100 ps. For an averaging interval of one day, we infer a limiting Allan deviation of about 1.4 × 10 −15 for the GPS geodetic technique. The accuracy of time comparisons is set by the ability to calibrate the absolute instrumental delays through the GPS receiver and antenna chain, currently about 3 ns. Geodetic clock measurements are available for most of the major timing laboratories, as well as for many other tracking stations and the satellites, via the routine products of the International GPS Service.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Comparison between frequency standards in Europe and the USA at the 10−15uncertainty level
Bauch, A., Achkar, J., Bize, S., Calonico, D., Dach, R., Hlavać, R., Lorini, L., Parker, T., Petit, G., Piester, D., et al. (2006) · Metrologia · doi:10.1088/0026-1394/43/1/016 · Cited by 225
1 × 10−16frequency transfer by GPS PPP with integer ambiguity resolution
Petit, G., Kanj, A., Loyer, S., Delporte, J., Mercier, F., & Perosanz, F. (2015) · Metrologia · doi:10.1088/0026-1394/52/2/301 · Cited by 168
Search for domain wall dark matter with atomic clocks on board global positioning system satellites
Roberts, B. M., Blewitt, G., Dailey, C., Murphy, M., Pospelov, M., Rollings, A., Sherman, J., Williams, W., & Derevianko, A. (2017) · Nature Communications · doi:10.1038/s41467-017-01440-4 · Cited by 143
Direct comparisons of European primary and secondary frequency standards via satellite techniques
Riedel, F., Al-Masoudi, A., Benkler, E., Dörscher, S., Gerginov, V, Grebing, C., Häfner, S., Huntemann, N., Lipphardt, B., Lisdat, C., et al. (2020) · Metrologia · doi:10.1088/1681-7575/ab6745 · Cited by 38
Frequency Comparison of $^{171}{\text {Yb}}^+$ Ion Optical Clocks at PTB and NPL via GPS PPP
Leute, J., Huntemann, N., Lipphardt, B., Tamm, C., Nisbet-Jones, P. B. R., King, S. A., Godun, R. M., Jones, J. M., Margolis, H. S., Whibberley, P. B., et al. (2016) · IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control · doi:10.1109/tuffc.2016.2524988 · Cited by 29
“GPS precise point positioning (PPP) links between distant clocks reach an instability of 10−15 at 1 day averaging time [1], [2].”
Background
Metadata
- Authors
- Ray, J., & Senior, K.
- Venue
- Metrologia
- Publisher
- IOP Publishing
- Published
- 2005-04-26
- Volume
- 42
- Issue
- 4
- Pages
- 215-232
- ISSN
- 0026-1394 (ISSN-L)
- 1681-7575
- OpenAlex
- W2169321939
- Cited by
- 173
- References
- 0
- FWCI
- 26.91
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Geodetic techniques for time and frequency comparisons using GPS phase and code measurements. https://app.cochat.ai/papers/10.1088/0026-1394/42/4/005
- The paper
- Ray, J., & Senior, K. (2005). Geodetic techniques for time and frequency comparisons using GPS phase and code measurements. Metrologia. https://doi.org/10.1088/0026-1394/42/4/005
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.