An evaluation of a novel plastic optical fibre sensor for axial strain and bend measurements
Open accessThe DOI matches its Crossref record.
Abstract
This paper reports the use of a low cost, intensity-based plastic optical fibre sensor for curvature and strain measurements in samples subjected to flexural and tensile loading conditions respectively. This simple and robust sensor exhibits a high signal-to-noise ratio and excellent repeatability, rendering the system cost effective for operation in harsh environments. In addition, this inexpensive system offers a signal linearity and signal stability comparable to that of an in-fibre Bragg grating sensor and other more sophisticated optical fibre sensor systems. Test results have shown that the sensor exhibits a highly linear response to axial strains of up to 1.2% and bending strains up to 0.7% offering a strain resolution of up to 20 microstrain. Findings from a series of cyclic tests have demonstrated that the sensor response is highly repeatable, exhibiting only a very small amount of hysteresis. The results also highlight the possibility of using the sensor for monitoring strain on either the tensile or compressive side/region of a beam subjected to flexural loading.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Polymer optical fiber sensors—a review
Peters, K. (2011) · Smart Materials and Structures · doi:10.1088/0964-1726/20/1/013002 · Cited by 529
Wearable Sensors for Monitoring Human Motion: A Review on Mechanisms, Materials, and Challenges
Homayounfar, S. Z., & Andrew, T. L. (2020) · SLAS TECHNOLOGY · doi:10.1177/2472630319891128 · Cited by 227
“High signal linearity and stability under tension and flexure loading have been reported for a lightweight plastic OFS.(9,10) Kuang et al.”
BackgroundMonitoring Methods of Human Body Joints: State-of-the-Art and Research Challenges
Faisal, A. I., Majumder, S., Mondal, T., Cowan, D., Naseh, S., & Deen, M. J. (2019) · Sensors · doi:10.3390/s19112629 · Cited by 187
Metadata
- Authors
- Kuang, K. S. C., Cantwell, W. J., & Scully, P. J.
- Venue
- Measurement Science and Technology
- Publisher
- IOP Publishing
- Published
- 2002-09-03
- Volume
- 13
- Issue
- 10
- Pages
- 1523-1534
- ISSN
- 0957-0233 (ISSN-L)
- OpenAlex
- W2025567111
- Cited by
- 187
- References
- 0
- FWCI
- 3.15
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: An evaluation of a novel plastic optical fibre sensor for axial strain and bend measurements. https://app.cochat.ai/papers/10.1088/0957-0233/13/10/303
- The paper
- Kuang, K. S. C., Cantwell, W. J., & Scully, P. J. (2002). An evaluation of a novel plastic optical fibre sensor for axial strain and bend measurements. Measurement Science and Technology. https://doi.org/10.1088/0957-0233/13/10/303
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.