Electrically configurable electroforming and bipolar resistive switching in Pt/TiO2/Pt structures
Open accessThe DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Abstract
This study examined the effects of electrical forming methods on the bipolar resistance switching (BRS) behavior in Pt/TiO(2)/Pt sandwich structures. The BRS is confined to a region near the ruptured end of conducting nanofilaments, which are composed of a Ti(n)O(2n-1) Magnéli phase formed by electroforming. The intermediate phase with an oxygen vacancy concentration between the insulating TiO(2) and the residual conducting filament that formed at the interface region was considered to be the switching layer (SL). The change in filament shape caused by a variation in the compliance current during filament formation resulted in a different filament rupture location and SL configuration. Precise control of the filament formation and rupture process resulted in SLs connected in an anti-parallel configuration. It was possible to reconfigure the SLs in the same fashion without any restraints, which allowed an unlimited memristive operation to be achieved. This paper presents a new technique in voltage sweep mode that applies a compliance current as a tool to achieve a memristor with unlimited operation.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Strukov, D. B., Snider, G. S., Stewart, D. R., & Williams, R. S. (2008) · Nature · doi:10.1038/nature06932 · Cited by 11,828
Redox‐Based Resistive Switching Memories – Nanoionic Mechanisms, Prospects, and Challenges
Waser, R., Dittmann, R., Staikov, G., & Szot, K. (2009) · Advanced Materials · doi:10.1002/adma.200900375 · Cited by 5,080
Nanoionics-based resistive switching memories
Waser, R., & Aono, M. (2007) · Nature Materials · doi:10.1038/nmat2023 · Cited by 4,923
Memristive switching mechanism for metal/oxide/metal nanodevices
Yang, J. J., Pickett, M. D., Li, X., Ohlberg, D. A. A., Stewart, D. R., & Williams, R. S. (2008) · Nature Nanotechnology · doi:10.1038/nnano.2008.160 · Cited by 2,987
Atomic structure of conducting nanofilaments in TiO2 resistive switching memory
Kwon, D.-H., Kim, K. M., Jang, J. H., Jeon, J. M., Lee, M. H., Kim, G. H., Li, X.-S., Park, G.-S., Lee, B., Han, S., et al. (2010) · Nature Nanotechnology · doi:10.1038/nnano.2009.456 · Cited by 2,092
Self-citation
Cited by
Emerging memories: resistive switching mechanisms and current status
Jeong, D. S., Thomas, R., Katiyar, R. S., Scott, J. F., Kohlstedt, H., Petraru, A., & Hwang, C. S. (2012) · Reports on Progress in Physics · doi:10.1088/0034-4885/75/7/076502 · Cited by 1,106
Self-citationResistive Random Access Memory (ReRAM) Based on Metal Oxides
Akinaga, H., & Shima, H. (2010) · Proceedings of the IEEE · doi:10.1109/jproc.2010.2070830 · Cited by 1,037
Kim, K. M., Jeong, D. S., & Hwang, C. S. (2011) · Nanotechnology · doi:10.1088/0957-4484/22/25/254002 · Cited by 631
Self-citationThe Future of Memristors: Materials Engineering and Neural Networks
Sun, K., Chen, J., & Yan, X. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202006773 · Cited by 482
Resistive switching phenomena: A review of statistical physics approaches
Lee, J. S., Lee, S., & Noh, T. W. (2015) · Applied Physics Reviews · doi:10.1063/1.4929512 · Cited by 463
Metadata
- Authors
- Kim, K. M., Kim, G. H., Song, S. J., Seok, J. Y., Lee, M. H., Yoon, J. H., & Hwang, C. S.
- Venue
- Nanotechnology
- Publisher
- IOP Publishing
- Published
- 2010-07-08
- Volume
- 21
- Issue
- 30
- Pages
- 305203
- ISSN
- 0957-4484 (ISSN-L)
- 1361-6528
- OpenAlex
- W2015497352
- Cited by
- 136
- References
- 5
- FWCI
- 8.47
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Electrically configurable electroforming and bipolar resistive switching in Pt/TiO2/Pt structures. https://app.cochat.ai/papers/10.1088/0957-4484/21/30/305203
- The paper
- Kim, K. M., Kim, G. H., Song, S. J., Seok, J. Y., Lee, M. H., Yoon, J. H., & Hwang, C. S. (2010). Electrically configurable electroforming and bipolar resistive switching in Pt/TiO2/Pt structures. Nanotechnology. https://doi.org/10.1088/0957-4484/21/30/305203
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.