Reversible CO2adsorption by an activated nitrogen doped graphene/polyaniline material
The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
For effective adsorption of carbon dioxide (CO2), we investigate a porous N functionalized graphene adsorbent produced by the chemical activation of a reduced graphene oxide/polyaniline composite. The N-doped graphene composite is microporous with a maximum BET surface area of 1336 m(2) g(-1). It shows a highly reversible maximum CO2 storage capacity of 2.7 mmol g(-1) at 298 K and 1 atm (5.8 mmol g(-1) at 273 K and 1 atm). The N-doped graphene shows good stability during recycling with only an initial decrease of 10% (3-2.7 mmol g(-1)) in adsorption capacity before attaining a cycling equilibrium. The adsorbance capacity is correlated with N content × pore volume or N content × surface area. Given that there is no proper correlation parameter, these factors can be used to increase the CO2 adsorption capacity of N-doped graphene materials for practical utility. The as synthesized material also displays selectivity towards CO2 adsorption compared to H2, N2, Ar or CH4. The as formed material shows that graphene can be uniformly N-doped using the presented synthetic method.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Sustainable porous carbons with a superior performance for CO2 capture
Sevilla, M., & Fuertes, A. B. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00784f · Cited by 1,088
Effect of pore size on carbon dioxide sorption by carbide derived carbon
Presser, V., McDonough, J., Yeon, S.-H., & Gogotsi, Y. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01176f · Cited by 668
Increased soil emissions of potent greenhouse gases under increased atmospheric CO2
van Groenigen, K. J., Osenberg, C. W., & Hungate, B. A. (2011) · Nature · doi:10.1038/nature10176 · Cited by 551
Cited by
Georgakilas, V., Tiwari, J. N., Kemp, K. C., Perman, J. A., Bourlinos, A. B., Kim, K. S., & Zboril, R. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00620 · Cited by 2,494
Self-citationHeteroatom-doped graphene materials: syntheses, properties and applications
Wang, X., Sun, G., Routh, P., Kim, D.-H., Huang, W., & Chen, P. (2014) · Chem. Soc. Rev. · doi:10.1039/c4cs00141a · Cited by 1,891
Graphene-based materials: Synthesis and gas sorption, storage and separation
Gadipelli, S., & Guo, Z. X. (2015) · Progress in Materials Science · doi:10.1016/j.pmatsci.2014.10.004 · Cited by 734
Trends in Solid Adsorbent Materials Development for CO 2 Capture
Pardakhti, M., Jafari, T., Tobin, Z., Dutta, B., Moharreri, E., Shemshaki, N. S., Suib, S., & Srivastava, R. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b08487 · Cited by 357
Ahmed, R., Liu, G., Yousaf, B., Abbas, Q., Ullah, H., & Ali, M. U. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.118409 · Cited by 349
Metadata
- Authors
- Christian Kemp, K., Chandra, V., Saleh, M., & Kim, K. S.
- Venue
- Nanotechnology
- Publisher
- IOP Publishing
- Published
- 2013-05-13
- Volume
- 24
- Issue
- 23
- Pages
- 235703
- ISSN
- 0957-4484 (ISSN-L)
- 1361-6528
- OpenAlex
- W2061652261
- Cited by
- 93
- References
- 3
- FWCI
- 14.17
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Reversible CO2adsorption by an activated nitrogen doped graphene/polyaniline material. https://app.cochat.ai/papers/10.1088/0957-4484/24/23/235703
- The paper
- Christian Kemp, K., Chandra, V., Saleh, M., & Kim, K. S. (2013). Reversible CO2adsorption by an activated nitrogen doped graphene/polyaniline material. Nanotechnology. https://doi.org/10.1088/0957-4484/24/23/235703
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.