The DOI matches its Crossref record.
Microstructure fabrication with a CO2 laser system
Open accessAbstract
In this paper, we investigate the use of a commercial CO 2 laser system for fabrication of microfluidic systems in polymers. We discuss the cutting process with the laser system and present a straightforward model for the channel depth of microchannels dependent on the fabrication parameters. In particular, we examine the influence of the cutting sequence, the number of cut passes, the laser beam velocity and the laser radiant flux. The model allows the prediction of microchannel depths within a maximum deviation of 8 µm for channels that are up to 210 µm in depths. It was shown that, at constant channel depth, the channel width could be varied by 27% by using different cutting parameters. The optimum cutting sequence for the production of a channel -junction is also presented in the paper. The laser system is shown to be a flexible and rapid tool for the production of polymer microfluidic prototypes.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
A laser-engraved wearable sensor for sensitive detection of uric acid and tyrosine in sweat
Yang, Y., Song, Y., Bo, X., Min, J., Pak, O. S., Zhu, L., Wang, M., Tu, J., Kogan, A., Zhang, H., et al. (2020) · Nature Biotechnology · doi:10.1038/s41587-019-0321-x · Cited by 1,270
Polymer microfabrication technologies for microfluidic systems
Becker, H., & Gärtner, C. (2008) · Analytical and Bioanalytical Chemistry · doi:10.1007/s00216-007-1692-2 · Cited by 860
Disposable Microfluidic Devices: Fabrication, Function, and Application
Fiorini, G. S., & Chiu, D. T. (2005) · BioTechniques · doi:10.2144/05383rv02 · Cited by 487
Laser Beam MicroMachining (LBMM) – A review
Mishra, S., & Yadava, V. (2015) · Optics and Lasers in Engineering · doi:10.1016/j.optlaseng.2015.03.017 · Cited by 261
Metadata
- Authors
- Snakenborg, D., Klank, H., & Kutter, J. P.
- Venue
- Journal of Micromechanics and Microengineering
- Publisher
- IOP Publishing
- Published
- 2003-10-17
- Volume
- 14
- Issue
- 2
- Pages
- 182-189
- ISSN
- 0960-1317 (ISSN-L)
- 1361-6439
- OpenAlex
- W2127233530
- Cited by
- 158
- References
- 0
- FWCI
- 3.90
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Microstructure fabrication with a CO2 laser system. https://app.cochat.ai/papers/10.1088/0960-1317/14/2/003
- The paper
- Snakenborg, D., Klank, H., & Kutter, J. P. (2004). Microstructure fabrication with a CO2 laser system. Journal of Micromechanics and Microengineering. https://doi.org/10.1088/0960-1317/14/2/003
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.