The DOI matches its Crossref record; 47 of the 47 references it cites were found in a registry or an index.
Efficiency of energy conversion for a piezoelectric power harvesting system
Open accessAbstract
This paper studies the energy conversion efficiency for a rectified piezoelectric power harvester. An analytical model is proposed, and an expression of efficiency is derived under steady-state operation. In addition, the relationship among the conversion efficiency, electrically induced damping and ac–dc power output is established explicitly. It is shown that the optimization criteria are different depending on the relative strength of the coupling. For the weak electromechanical coupling system, the optimal power transfer is attained when the efficiency and induced damping achieve their maximum values. This result is consistent with that observed in the recent literature. However, a new finding shows that they are not simultaneously maximized in the strongly coupled electromechanical system.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A study of low level vibrations as a power source for wireless sensor nodes
Roundy, S., Wright, P. K., & Rabaey, J. (2003) · Computer Communications · doi:10.1016/s0140-3664(02)00248-7 · Cited by 2,819
A piezoelectric vibration based generator for wireless electronics
Roundy, S., & Wright, P. K. (2004) · Smart Materials and Structures · doi:10.1088/0964-1726/13/5/018 · Cited by 1,818
Analysis of a micro-electric generator for microsystems
Williams, C. B., & Yates, R. B. (1996) · Sensors and Actuators A: Physical · doi:10.1016/0924-4247(96)80118-x · Cited by 1,407
A Review of Power Harvesting from Vibration Using Piezoelectric Materials
Sodano, H. A., Inman, D. J., & Park, G. (2004) · The Shock and Vibration Digest · doi:10.1177/0583102404043275 · Cited by 1,361
Adaptive piezoelectric energy harvesting circuit for wireless remote power supply
Ottman, G. K., Hofmann, H. F., Bhatt, A. C., & Lesieutre, G. A. (2002) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2002.802194 · Cited by 1,206
Toward energy harvesting using active materials and conversion improvement by nonlinear processing
Guyomar, D., Badel, A., Lefeuvre, E., & Richard, C. (2005) · IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control · doi:10.1109/tuffc.2005.1428041 · Cited by 1,049
Improving Power Output for Vibration-Based Energy Scavengers
Roundy, S., Leland, E. S., Baker, J., Carleton, E., Reilly, E., Lai, E., Otis, B., Rabaey, J. M., Sundararajan, V., & Wright, P. K. (2005) · IEEE Pervasive Computing · doi:10.1109/mprv.2005.14 · Cited by 1,031
Adaptive piezoelectric energy harvesting circuit for wireless, remote power supply
Ottman, G., Bhatt, A., Hofmann, H., & Lesieutre, G. (2001) · 19th AIAA Applied Aerodynamics Conference · doi:10.2514/6.2001-1505 · Cited by 953
MEMS power generator with transverse mode thin film PZT
Jeon, Y. B., Sood, R., Jeong, J.-H., & Kim, S.-G. (2005) · Sensors and Actuators A: Physical · doi:10.1016/j.sna.2004.12.032 · Cited by 795
DESIGN CONSIDERATIONS FOR MEMS-SCALE PIEZOELECTRIC MECHANICAL VIBRATION ENERGY HARVESTERS
DUTOIT, N. E., WARDLE, B. L., & KIM, S.-G. (2005) · Integrated Ferroelectrics · doi:10.1080/10584580590964574 · Cited by 759
Cited by
Energy Harvesting From Human and Machine Motion for Wireless Electronic Devices
Mitcheson, P. D., Yeatman, E. M., Rao, G. K., Holmes, A. S., & Green, T. C. (2008) · Proceedings of the IEEE · doi:10.1109/jproc.2008.927494 · Cited by 1,888
A review of the recent research on vibration energy harvesting via bistable systems
Harne, R. L., & Wang, K. W. (2013) · Smart Materials and Structures · doi:10.1088/0964-1726/22/2/023001 · Cited by 1,351
Piezoelectric and ferroelectric materials and structures for energy harvesting applications
Bowen, C. R., Kim, H. A., Weaver, P. M., & Dunn, S. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee42454e · Cited by 1,223
A review of piezoelectric energy harvesting based on vibration
Kim, H. S., Kim, J.-H., & Kim, J. (2011) · International Journal of Precision Engineering and Manufacturing · doi:10.1007/s12541-011-0151-3 · Cited by 1,121
A comprehensive review on vibration energy harvesting: Modelling and realization
Wei, C., & Jing, X. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.01.073 · Cited by 952
Metadata
- Authors
- Shu, Y. C., & Lien, I. C.
- Venue
- Journal of Micromechanics and Microengineering
- Publisher
- IOP Publishing
- Published
- 2006-09-29
- Volume
- 16
- Issue
- 11
- Pages
- 2429-2438
- ISSN
- 0960-1317 (ISSN-L)
- 1361-6439
- OpenAlex
- W2154298299
- Cited by
- 310
- References
- 47
- FWCI
- 18.09
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Efficiency of energy conversion for a piezoelectric power harvesting system. https://app.cochat.ai/papers/10.1088/0960-1317/16/11/026
- The paper
- Shu, Y. C., & Lien, I. C. (2006). Efficiency of energy conversion for a piezoelectric power harvesting system. Journal of Micromechanics and Microengineering. https://doi.org/10.1088/0960-1317/16/11/026
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.