The DOI matches its Crossref record.
The development of a high-performance perfluorinated polymer electret and its application to micro power generation
Open accessAbstract
Recently, micro power generation using electrets has attracted much attention due to its large power output at a low frequency range. Since the theoretical power output is proportional to the square of the surface charge density of the electret, the development of a high-performance electret is required. In the present study, it is shown that the surface charge density of a CYTOP electret is significantly improved by the addition of terminal groups. Based on this fact, a novel high-performance polymer electret has been developed by doping a silane-coupling reagent into the polymer. A series of measurements of surface potential and TSD (thermally stimulated discharge) spectra was made for various CYTOP films prepared with different silane-coupling reagent concentrations. It is found that the surface charge density, charge stability and thermal resistibility of electric charges are markedly improved by the doping. A surface charge density of 1.5 mC cm −2 , which is three times larger than that of Teflon AF, has been obtained on a 15 µm thick film. In addition, the thermal stability of the CYTOP electret is superior to that of Teflon AF. Power generation experiment is also performed using the patterned CYTOP electret of 20 × 20 mm 2 . At a low seismic frequency of 20 Hz, 0.7 mW power generation has been accomplished, which is about 2.5 times higher than our previous result.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Wang, S., Xie, Y., Niu, S., Lin, L., Liu, C., Zhou, Y. S., & Wang, Z. L. (2014) · Advanced Materials · doi:10.1002/adma.201402491 · Cited by 679
Wang, H., Jasim, A., & Chen, X. (2018) · Applied Energy · doi:10.1016/j.apenergy.2017.12.125 · Cited by 494
Recent progress in MEMS electret generator for energy harvesting
Suzuki, Y. (2011) · IEEJ Transactions on Electrical and Electronic Engineering · doi:10.1002/tee.20631 · Cited by 390
Self-citationLiu, H., Tay, C. J., Quan, C., Kobayashi, T., & Lee, C. (2011) · Journal of Microelectromechanical Systems · doi:10.1109/jmems.2011.2162488 · Cited by 361
Cheng, X., Song, Y., Han, M., Meng, B., Su, Z., Miao, L., & Zhang, H. (2016) · Sensors and Actuators A: Physical · doi:10.1016/j.sna.2016.05.051 · Cited by 41
Metadata
- Authors
- Sakane, Y., Suzuki, Y., & Kasagi, N.
- Venue
- Journal of Micromechanics and Microengineering
- Publisher
- IOP Publishing
- Published
- 2008-09-29
- Volume
- 18
- Issue
- 10
- Pages
- 104011
- ISSN
- 0960-1317 (ISSN-L)
- 1361-6439
- OpenAlex
- W2148194126
- Cited by
- 251
- References
- 0
- FWCI
- 8.31
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: The development of a high-performance perfluorinated polymer electret and its application to micro power generation. https://app.cochat.ai/papers/10.1088/0960-1317/18/10/104011
- The paper
- Sakane, Y., Suzuki, Y., & Kasagi, N. (2008). The development of a high-performance perfluorinated polymer electret and its application to micro power generation. Journal of Micromechanics and Microengineering. https://doi.org/10.1088/0960-1317/18/10/104011
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.