The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Finite-dimensional piezoelectric transducer modeling for guided wave based structural health monitoring
Open accessAbstract
Among the various schemes being considered for structural health monitoring (SHM), guided wave (GW) testing in particular has shown great promise. While GW testing using hand-held transducers for non-destructive evaluation (NDE) is a well established technology, GW testing for SHM using surface-bonded/embedded piezoelectric wafer transducers (piezos) is relatively in its formative years. Little effort has been made towards a precise characterization of GW excitation using piezos and often the various parameters involved are chosen without mathematical foundation. In this work, a formulation for modeling the transient GW field excited using arbitrary shaped surface-bonded piezos in isotropic plates based on the 3D linear elasticity equations is presented. This is then used for the specific cases of rectangular and ring-shaped actuators, which are most commonly used in GW SHM. Equations for the output voltage response of surface-bonded piezo-sensors in GW fields are derived and optimization of the actuator/sensor dimensions is done based on these. Finally, numerical and experimental results establishing the validity of these models are discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Use of piezoelectric actuators as elements of intelligent structures
Crawley, E. F., & de Luis, J. (1987) · AIAA Journal · doi:10.2514/3.9792 · Cited by 2,602
Lamb, H. (1917) · Proceedings of the Royal Society of London Series A Containing Papers of a Mathematical and Physical Character · doi:10.1098/rspa.1917.0008 · Cited by 1,289
Lamb wave generation with piezoelectric wafer active sensors for structural health monitoring
Giurgiutiu, V. (2003) · SPIE Proceedings · doi:10.1117/12.483492 · Cited by 235
Lemistre, M., & Balageas, D. (2001) · Smart Materials and Structures · doi:10.1088/0964-1726/10/3/312 · Cited by 218
Lin, X., & Yuan, F. G. (2001) · Smart Materials and Structures · doi:10.1088/0964-1726/10/5/307 · Cited by 178
Cited by
Guided wave based structural health monitoring: A review
Mitra, M., & Gopalakrishnan, S. (2016) · Smart Materials and Structures · doi:10.1088/0964-1726/25/5/053001 · Cited by 1,045
In situ 2-D piezoelectric wafer active sensors arrays for guided wave damage detection
Yu, L., & Giurgiutiu, V. (2008) · Ultrasonics · doi:10.1016/j.ultras.2007.10.008 · Cited by 315
Temperature effects in ultrasonic Lamb wave structural health monitoring systems
Lanza di Scalea, F., & Salamone, S. (2008) · The Journal of the Acoustical Society of America · doi:10.1121/1.2932071 · Cited by 203
Effects of elevated temperature on guided-wave structural health monitoring
Raghavan, A., & Cesnik, C. E. S. (2008) · Journal of Intelligent Material Systems and Structures · doi:10.1177/1045389x07086691 · Cited by 138
Roy, S., Lonkar, K., Janapati, V., & Chang, F.-K. (2014) · Structural Health Monitoring · doi:10.1177/1475921714522846 · Cited by 126
Metadata
- Authors
- Raghavan, A., & Cesnik, C. E. S.
- Venue
- Smart Materials and Structures
- Publisher
- IOP Publishing
- Published
- 2005-11-09
- Volume
- 14
- Issue
- 6
- Pages
- 1448-1461
- ISSN
- 0964-1726 (ISSN-L)
- 1361-665X
- OpenAlex
- W2078619930
- Cited by
- 267
- References
- 5
- FWCI
- 13.54
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Finite-dimensional piezoelectric transducer modeling for guided wave based structural health monitoring. https://app.cochat.ai/papers/10.1088/0964-1726/14/6/037
- The paper
- Raghavan, A., & Cesnik, C. E. S. (2005). Finite-dimensional piezoelectric transducer modeling for guided wave based structural health monitoring. Smart Materials and Structures. https://doi.org/10.1088/0964-1726/14/6/037
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.