The DOI matches its Crossref record.
A coupled piezoelectric–electromagnetic energy harvesting technique for achieving increased power output through damping matching
Open accessAbstract
Vibration energy harvesting is being pursued as a means to power wireless sensors and ultra-low power autonomous devices. From a design standpoint, matching the electrical damping induced by the energy harvesting mechanism to the mechanical damping in the system is necessary for maximum efficiency. In this work two independent energy harvesting techniques are coupled to provide higher electrical damping within the system. Here the coupled energy harvesting device consists of a primary piezoelectric energy harvesting device to which an electromagnetic component is added to better match the total electrical damping to the mechanical damping in the system. The first coupled device has a resonance frequency of 21.6 Hz and generates a peak power output of ∼332 µW, compared to 257 and 244 µW obtained from the optimized, stand-alone piezoelectric and electromagnetic energy harvesting devices, respectively, resulting in a 30% increase in power output. A theoretical model has been developed which closely agrees with the experimental results. A second coupled device, which utilizes the d 33 piezoelectric mode, shows a 65% increase in power output in comparison to the corresponding stand-alone, single harvesting mode devices. This work illustrates the design considerations and limitations that one must consider to enhance device performance through the coupling of multiple harvesting mechanisms within a single energy harvesting device.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Liu, H., Zhong, J., Lee, C., Lee, S.-W., & Lin, L. (2018) · Applied Physics Reviews · doi:10.1063/1.5074184 · Cited by 905
Safaei, M., Sodano, H. A., & Anton, S. R. (2019) · Smart Materials and Structures · doi:10.1088/1361-665x/ab36e4 · Cited by 874
“Society of Photo Optical Instrumentation Engineers), (c) piezoelectric-electromagnetic harvester (reproduced from [457].”
BackgroundLiu, H., Fu, H., Sun, L., Lee, C., & Yeatman, E. M. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.110473 · Cited by 405
Thermoelectricity for IoT – A review
Haras, M., & Skotnicki, T. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.10.013 · Cited by 368
Gu, L., & Livermore, C. (2011) · Smart Materials and Structures · doi:10.1088/0964-1726/20/4/045004 · Cited by 299
Metadata
- Authors
- Challa, V. R., Prasad, M. G., & Fisher, F. T.
- Venue
- Smart Materials and Structures
- Publisher
- IOP Publishing
- Published
- 2009-08-06
- Volume
- 18
- Issue
- 9
- Pages
- 095029
- ISSN
- 0964-1726 (ISSN-L)
- 1361-665X
- OpenAlex
- W1988603396
- Cited by
- 240
- References
- 0
- FWCI
- 12.64
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A coupled piezoelectric–electromagnetic energy harvesting technique for achieving increased power output through damping matching. https://app.cochat.ai/papers/10.1088/0964-1726/18/9/095029
- The paper
- Challa, V. R., Prasad, M. G., & Fisher, F. T. (2009). A coupled piezoelectric–electromagnetic energy harvesting technique for achieving increased power output through damping matching. Smart Materials and Structures. https://doi.org/10.1088/0964-1726/18/9/095029
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.