The DOI matches its Crossref record; 27 of the 27 references it cites were found in a registry or an index.
Impact-driven, frequency up-converting coupled vibration energy harvesting device for low frequency operation
Open accessAbstract
This paper presents experiments and models of an energy harvesting device in which a low frequency resonator impacts a high frequency energy harvesting resonator, resulting in energy harvesting predominantly at the system's coupled vibration frequency.Analysis shows that a reduced mechanical damping ratio during coupled vibration enables increased electrical power generation as compared with conventional technology.Experiments demonstrate that the efficiency of electrical power transfer is significantly improved with the coupled vibration approach.An average power output of 0.43 mW is achieved under 0.4g acceleration at 8.2 Hz, corresponding to a power density of 25.5 μW cm -3 .The measured power and power density at the resonant frequency are respectively 4.8 times and 13 times the measured peak values for a conventional harvester created from a low frequency beam alone.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Energy harvesting vibration sources for microsystems applications
Beeby, S. P., Tudor, M. J., & White, N. M. (2006) · Measurement Science and Technology · doi:10.1088/0957-0233/17/12/r01 · Cited by 3,008
Erturk, A., & Inman, D. J. (2009) · Smart Materials and Structures · doi:10.1088/0964-1726/18/2/025009 · Cited by 1,417
Cook-Chennault, K. A., Thambi, N., & Sastry, A. M. (2008) · Smart Materials and Structures · doi:10.1088/0964-1726/17/4/043001 · Cited by 1,241
Cottone, F., Vocca, H., & Gammaitoni, L. (2009) · Physical Review Letters · doi:10.1103/physrevlett.102.080601 · Cited by 1,185
A periodically forced piecewise linear oscillator
Shaw, S. W., & Holmes, P. J. (1983) · Journal of Sound and Vibration · doi:10.1016/0022-460x(83)90407-8 · Cited by 887
Self-powered signal processing using vibration-based power generation
Amirtharajah, R., & Chandrakasan, A. P. (1998) · IEEE Journal of Solid-State Circuits · doi:10.1109/4.668982 · Cited by 621
A piezoelectric bistable plate for nonlinear broadband energy harvesting
Arrieta, A. F., Hagedorn, P., Erturk, A., & Inman, D. J. (2010) · Applied Physics Letters · doi:10.1063/1.3487780 · Cited by 492
Analysis and Design Principles of MEMS Devices
(2005) · Elsevier eBooks · doi:10.1016/b978-0-444-51616-9.x5000-0 · Cited by 483
Energy Scavenging for Wireless Sensor Nodes with a Focus on Vibration-to-Electricity Conversion
Roundy, S. (2003) · Cited by 466
An electromagnetic micro power generator for wideband environmental vibrations
Sari, I., Balkan, T., & Kulah, H. (2008) · Sensors and Actuators A: Physical · doi:10.1016/j.sna.2007.11.021 · Cited by 405
Cited by
A review of the recent research on vibration energy harvesting via bistable systems
Harne, R. L., & Wang, K. W. (2013) · Smart Materials and Structures · doi:10.1088/0964-1726/22/2/023001 · Cited by 1,351
Liu, H., Zhong, J., Lee, C., Lee, S.-W., & Lin, L. (2018) · Applied Physics Reviews · doi:10.1063/1.5074184 · Cited by 905
Safaei, M., Sodano, H. A., & Anton, S. R. (2019) · Smart Materials and Structures · doi:10.1088/1361-665x/ab36e4 · Cited by 874
“Impact driven mechanisms have also been suggested by Gu and Livermore in 2011 [170, 171] and Halim and Park in 2014 [167] that include a compliant driving beam which periodically impacts one or two piezoelectric beams in order to excite the generator beams at their resonant frequency (figure 3(h)).”
BackgroundPillatsch, P., Yeatman, E. M., & Holmes, A. S. (2014) · Sensors and Actuators A: Physical · doi:10.1016/j.sna.2013.10.003 · Cited by 335
Huang, M., Zhu, M., Feng, X., Zhang, Z., Tang, T., Guo, X., Chen, T., Liu, H., Sun, L., & Lee, C. (2023) · ACS Nano · doi:10.1021/acsnano.2c11366 · Cited by 90
Metadata
- Authors
- Gu, L., & Livermore, C.
- Venue
- Smart Materials and Structures
- Publisher
- IOP Publishing
- Published
- 2011-03-08
- Volume
- 20
- Issue
- 4
- Pages
- 045004
- ISSN
- 0964-1726 (ISSN-L)
- 1361-665X
- OpenAlex
- W2012472885
- Cited by
- 299
- References
- 27
- FWCI
- 31.30
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Impact-driven, frequency up-converting coupled vibration energy harvesting device for low frequency operation. https://app.cochat.ai/papers/10.1088/0964-1726/20/4/045004
- The paper
- Gu, L., & Livermore, C. (2011). Impact-driven, frequency up-converting coupled vibration energy harvesting device for low frequency operation. Smart Materials and Structures. https://doi.org/10.1088/0964-1726/20/4/045004
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.