The DOI matches its Crossref record.
Self-priming dielectric elastomer generators
Open accessAbstract
Dielectric elastomer generators (DEG) in their present form are not suitable for autonomous power generation; they simply increase the amount of power that an electrical energy source can supply. They require a priming charge for each cycle, normally provided by an auxiliary power source but, due to charges being transferred to a load or depleted by system losses, the energy source will eventually need replacing. In this paper we present a self-priming DEG system that is capable of replenishing these charge losses from generated energy, meaning that the energy source no longer requires periodic replacement. We then experimentally demonstrate that this system not only can replenish charge losses, but also is capable of increasing the amount of charge in the system and the voltage across the capacitance storing the charge. For instance, the system was capable of gradually boosting its voltage from 10 V up to 3.25 kV. This is highly advantageous because it was also shown that the efficiency of DEG power generation increases monotonically with DEG voltage. Also, this system allows these higher voltages to be reached without the need for a high voltage transformer, reducing the system cost.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Hammock, M. L., Chortos, A., Tee, B. C. ‐., Tok, J. B. ‐., & Bao, Z. (2013) · Advanced Materials · doi:10.1002/adma.201302240 · Cited by 2,396
Theory of dielectric elastomers
Suo, Z. (2010) · Acta Mechanica Solida Sinica · doi:10.1016/s0894-9166(11)60004-9 · Cited by 1,046
Multi-functional dielectric elastomer artificial muscles for soft and smart machines
Anderson, I. A., Gisby, T. A., McKay, T. G., O’Brien, B. M., & Calius, E. P. (2012) · Journal of Applied Physics · doi:10.1063/1.4740023 · Cited by 619
Self-citationFlexible and stretchable electrodes for dielectric elastomer actuators
Rosset, S., & Shea, H. R. (2013) · Applied Physics A · doi:10.1007/s00339-012-7402-8 · Cited by 529
Energy Harvesters for Wearable and Stretchable Electronics: From Flexibility to Stretchability
Wu, H., Huang, Y., Xu, F., Duan, Y., & Yin, Z. (2016) · Advanced Materials · doi:10.1002/adma.201602251 · Cited by 520
Metadata
- Authors
- McKay, T., O’Brien, B., Calius, E., & Anderson, I.
- Venue
- Smart Materials and Structures
- Publisher
- IOP Publishing
- Published
- 2010-04-09
- Volume
- 19
- Issue
- 5
- Pages
- 055025
- ISSN
- 0964-1726 (ISSN-L)
- 1361-665X
- OpenAlex
- W2052893103
- Cited by
- 178
- References
- 0
- FWCI
- 7.83
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Self-priming dielectric elastomer generators. https://app.cochat.ai/papers/10.1088/0964-1726/19/5/055025
- The paper
- McKay, T., O’Brien, B., Calius, E., & Anderson, I. (2010). Self-priming dielectric elastomer generators. Smart Materials and Structures. https://doi.org/10.1088/0964-1726/19/5/055025
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.