The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Energy harvesting using a PZT ceramic multilayer stack
Open accessAbstract
In this paper, the interdisciplinary energy harvesting issues on piezoelectric energy harvesting were investigated using a '33' mode (mechanical stress and/or electric field are in parallel to the polarization direction) lead zirconate titanate multilayer piezoelectric stack (PZT-Stack). Key energy harvesting characteristics including the generated electrical energy/power in the PZT-Stack, the mechanical to electrical energy conversion efficiency, the power delivered from the PZT-Stack to a resistive load, the electrical charge/energy transferred from the PZT-Stack to a super-capacitor were systematically addressed. Theoretical models for power generation and delivery to a resistive load were proposed and experimentally affirmed. In a quasi-static regime, 70% generated electrical powers were delivered to matched resistive loads. A 35% mechanical to electrical energy conversion efficiency, which is more than 4 times higher than other reports, for the PZT-Stack had been obtained. The generated electrical power and power density were significantly higher than those from a similar weight and size cantilever-type piezoelectric harvester in both resonance and off-resonance modes. In addition, our study indicated that the capacitance and piezoelectric coefficient of the PZT-Stack were strongly dependent on the dynamic stress.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Piezoelectric Nanogenerators Based on Zinc Oxide Nanowire Arrays
Wang, Z. L., & Song, J. (2006) · Science · doi:10.1126/science.1124005 · Cited by 7,922
Energy harvesting vibration sources for microsystems applications
Beeby, S. P., Tudor, M. J., & White, N. M. (2006) · Measurement Science and Technology · doi:10.1088/0957-0233/17/12/r01 · Cited by 3,008
Cited by
Safaei, M., Sodano, H. A., & Anton, S. R. (2019) · Smart Materials and Structures · doi:10.1088/1361-665x/ab36e4 · Cited by 874
Recent Progress on PZT Based Piezoelectric Energy Harvesting Technologies
Kang, M.-G., Jung, W.-S., Kang, C.-Y., & Yoon, S.-J. (2016) · Actuators · doi:10.3390/act5010005 · Cited by 273
Design, optimization, modeling and testing of a piezoelectric footwear energy harvester
Qian, F., Xu, T.-B., & Zuo, L. (2018) · Energy Conversion and Management · doi:10.1016/j.enconman.2018.06.069 · Cited by 194
Self-citationPiezoelectric energy harvesting from human walking using a two-stage amplification mechanism
Qian, F., Xu, T.-B., & Zuo, L. (2019) · Energy · doi:10.1016/j.energy.2019.116140 · Cited by 109
Self-citationEffect of garment design on piezoelectricity harvesting from joint movement
Yang, J.-H., Cho, H.-S., Park, S.-H., Song, S.-H., Yun, K.-S., & Lee, J. H. (2016) · Smart Materials and Structures · doi:10.1088/0964-1726/25/3/035012 · Cited by 40
Metadata
- Authors
- Xu, T.-B., Siochi, E. J., Kang, J. H., Zuo, L., Zhou, W., Tang, X., & Jiang, X.
- Venue
- Smart Materials and Structures
- Publisher
- IOP Publishing
- Published
- 2013-04-30
- Volume
- 22
- Issue
- 6
- Pages
- 065015
- ISSN
- 0964-1726 (ISSN-L)
- 1361-665X
- OpenAlex
- W2032627953
- Cited by
- 191
- References
- 2
- FWCI
- 14.61
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Energy harvesting using a PZT ceramic multilayer stack. https://app.cochat.ai/papers/10.1088/0964-1726/22/6/065015
- The paper
- Xu, T.-B., Siochi, E. J., Kang, J. H., Zuo, L., Zhou, W., Tang, X., & Jiang, X. (2013). Energy harvesting using a PZT ceramic multilayer stack. Smart Materials and Structures. https://doi.org/10.1088/0964-1726/22/6/065015
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
