Pulsed laser ablation of wire-shaped target in a thin water jet: effects of plasma features and bubble dynamics on the PLAL process
The DOI matches its Crossref record; 13 of the 13 references it cites were found in a registry or an index.
Abstract
In this paper, emission spectroscopy and fast imaging surveys during pulsed laser ablation in liquid (PLAL) for nanoparticles (NPs) production have been used, in order to provide further details about the process involved and the potentialities offered by a wire-shaped sample ablated in a flowing water jet. This kind of set-up has been explored because the laser ablation efficiency in water increases when a thin water layer and a wire-shaped target are used. In order to understand the physical processes causing the increasing ablation efficiency, both the laser-induced plasma and bubble dynamics generated in a flowing liquid jet have been analysed. The plasma parameters and the bubble behaviour in such a system have been compared with those observed in conventional PLAL experiments, where either a bulk or a wire-shaped target is immersed in bulk water. From the data presented here it is evidenced that the plasma and shockwave induced during the breakdown process can play a direct role in the ablation efficiency variation observed. With regard to the cavitation bubbles evolving near a free surface (the interface between water and air) it should be noted that these have to be treated with caution as a consequence of the strong influence played in these circumstances by the boundary of the water jet during its expansion dynamics. The effects due to the size of the liquid layer, the presence of the water/air interface, the liquid characteristics, the target shape, the plasma evolution and the bubble dynamics together with their outcomes on the NPs’ production, are presented and discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Laser Synthesis and Processing of Colloids: Fundamentals and Applications
Zhang, D., Gökce, B., & Barcikowski, S. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00468 · Cited by 1,344
Self-citationLaser ablation in liquids: Applications in the synthesis of nanocrystals
Yang, G. W. (2007) · Progress in Materials Science · doi:10.1016/j.pmatsci.2006.10.016 · Cited by 1,055
Amendola, V., & Meneghetti, M. (2013) · Phys. Chem. Chem. Phys. · doi:10.1039/c2cp42895d · Cited by 758 · cited 3×
“If the plasma and the cavitation bubble are generated in bulk water, which can be considered to be infinite, their dynamics will depend on the used experimental parameters such as laser characteristics (energy, pulse duration, focusing mode of the laser [2]), environmental characteristics (water temperature and pressu…”
BackgroundMechanisms and processes of pulsed laser ablation in liquids during nanoparticle production
DellʼAglio, M., Gaudiuso, R., De Pascale, O., & De Giacomo, A. (2015) · Applied Surface Science · doi:10.1016/j.apsusc.2015.01.082 · Cited by 270
Self-citationGeneration of nanoparticle colloids by picosecond and femtosecond laser ablations in liquid flow
Barcikowski, S., Menéndez-Manjón, A., Chichkov, B., Brikas, M., & Račiukaitis, G. (2007) · Applied Physics Letters · doi:10.1063/1.2773937 · Cited by 225 · cited 2×
“For instance, details about the increasing of NPs’ productivity of PLAL due to the reduction of the liquid thickness can be found in [13], or, alternatively by using a liquid flow [14].”
BackgroundSelf-citationDe Giacomo, A., Dell'Aglio, M., Santagata, A., Gaudiuso, R., De Pascale, O., Wagener, P., Messina, G. C., Compagnini, G., & Barcikowski, S. (2013) · Phys. Chem. Chem. Phys. · doi:10.1039/c2cp42649h · Cited by 181 · cited 10×
“5 when a bulk metal target or a metal wire thicker than 750 μm, are ablated [15].”
BackgroundMethodInfluentialSelf-citationShock Wave Emission by Laser Generated Bubbles
Lauterborn, W., & Vogel, A. (2013) · Bubble Dynamics and Shock Waves · doi:10.1007/978-3-642-34297-4_3 · Cited by 147
Sasaki, K., & Takada, N. (2010) · Pure and Applied Chemistry · doi:10.1351/pac-con-09-10-23 · Cited by 111 · cited 1×
“On the other hand, the bubble dynamics can instead be relevant for the final NPs’ size distribution and eventually for the aggregation process of these [45], since, in dependence of the dlayer employed, the shockwave’s multi-reflections induced by the bubble collapse can take place.”
BackgroundMessina, G. C., Wagener, P., Streubel, R., De Giacomo, A., Santagata, A., Compagnini, G., & Barcikowski, S. (2013) · Phys. Chem. Chem. Phys. · doi:10.1039/c2cp42626a · Cited by 68 · cited 3×
“In [35] the highest NPs’ productivity occurred when the Ag wire with diameter equal to 750 μm was employed.”
Self-citation
Cited by
Kanitz, A., Kalus, M.-R., Gurevich, E. L., Ostendorf, A., Barcikowski, S., & Amans, D. (2019) · Plasma Sources Science and Technology · doi:10.1088/1361-6595/ab3dbe · Cited by 195
Self-citationKohsakowski, S., Santagata, A., Dell’Aglio, M., de Giacomo, A., Barcikowski, S., Wagener, P., & Gökce, B. (2017) · Applied Surface Science · doi:10.1016/j.apsusc.2017.01.077 · Cited by 62
Self-citationSaraeva, I. N., Kudryashov, S. I., Rudenko, A. A., Zhilnikova, M. I., Ivanov, D. S., Zayarny, D. A., Simakin, A. V., Ionin, A. A., & Garcia, M. E. (2019) · Applied Surface Science · doi:10.1016/j.apsusc.2018.11.199 · Cited by 51
Nguyen, T. T. P., Tanabe-Yamagishi, R., & Ito, Y. (2019) · Applied Surface Science · doi:10.1016/j.apsusc.2018.10.160 · Cited by 44
Letzel, A., Santoro, M., Frohleiks, J., Ziefuß, A. R., Reich, S., Plech, A., Fazio, E., Neri, F., Barcikowski, S., & Gökce, B. (2019) · Applied Surface Science · doi:10.1016/j.apsusc.2018.12.025 · Cited by 44
Self-citation
Metadata
- Authors
- Dell’Aglio, M., De Giacomo, A., Kohsakowski, S., Barcikowski, S., Wagener, P., & Santagata, A.
- Venue
- Journal of Physics D: Applied Physics
- Publisher
- IOP Publishing
- Published
- 2017-04-04
- Volume
- 50
- Issue
- 18
- Pages
- 185204
- ISSN
- 0022-3727 (ISSN-L)
- 1361-6463
- OpenAlex
- W2604588826
- Cited by
- 27
- References
- 13
- FWCI
- 1.51
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Pulsed laser ablation of wire-shaped target in a thin water jet: effects of plasma features and bubble dynamics on the PLAL process. https://app.cochat.ai/papers/10.1088/1361-6463/aa652a
- The paper
- Dell’Aglio, M., De Giacomo, A., Kohsakowski, S., Barcikowski, S., Wagener, P., & Santagata, A. (2017). Pulsed laser ablation of wire-shaped target in a thin water jet: effects of plasma features and bubble dynamics on the PLAL process. Journal of Physics D: Applied Physics. https://doi.org/10.1088/1361-6463/aa652a
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.