The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
In-situ measurement and monitoring methods for metal powder bed fusion: an updated review
Open accessAbstract
The possibility of using a variety of sensor signals acquired during metal powder bed fusion processes, to support part and process qualification and for the early detection of anomalies and defects, has been continuously attracting an increasing interest. The number of research studies in this field has been characterised by significant growth in the last few years, with several advances and new solutions compared with first seminal works. Moreover, industrial powder bed fusion (PBF) systems are increasingly equipped with sensors and toolkits for data collection, visualisation and, in some cases, embedded in-process analysis. Many new methods have been proposed and defect detection capabilities have been demonstrated. Nevertheless, several challenges and open issues still need to be tackled to bridge the gap between methods proposed in the literature and actual industrial implementation. This paper presents an updated review of the literature on in-situ sensing, measurement and monitoring for metal PBF processes, with a classification of methods and a comparison of enabled performances. The study summarises the types and sizes of defects that are practically detectable while the part is being produced and the research areas where additional technological advances are currently needed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Ror2 signaling regulates Golgi structure and transport through IFT20 for tumor invasiveness
Nishita, M., Park, S.-Y., Nishio, T., Kamizaki, K., Wang, Z., Tamada, K., Takumi, T., Hashimoto, R., Otani, H., Pazour, G. J., et al. (2017) · Scientific Reports · doi:10.1038/s41598-016-0028-x · Cited by 15,947 · cited 3×
“…a variations of the time a pixel temperature stays above a given threshold (Mohr et al In-situ x-ray video imaging confirmed aforementioned res-ults and enabled more in depth insights about the by-product properties and origination mechanisms (Zhao et al 2017, Leung et al 2018, Young et al 2020).”
Review of in-situ process monitoring and in-situ metrology for metal additive manufacturing
Everton, S. K., Hirsch, M., Stravroulakis, P., Leach, R. K., & Clare, A. T. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.01.099 · Cited by 1,469
Self-citationShemer, A., Grozovski, J., Tay, T. L., Tao, J., Volaski, A., Süß, P., Ardura-Fabregat, A., Gross-Vered, M., Kim, J.-S., David, E., et al. (2018) · Nature Communications · doi:10.1038/s41467-018-07548-5 · Cited by 1,052
Process defects and in situ monitoring methods in metal powder bed fusion: a review
Grasso, M., & Colosimo, B. M. (2017) · Measurement Science and Technology · doi:10.1088/1361-6501/aa5c4f · Cited by 833 · cited 2×
“Other authors reviewed the literature devoted to in-situ sensing and monitoring methods (Ever-ton et al 2016, Spears and Gold 2016, Grasso and Colosimo 2017), summarising and comparing various possible solutions to make sense of large amounts of data measured layer by layer.”
Self-citationScime, L., & Beuth, J. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2017.11.009 · Cited by 489
Sing, S. L., Huang, S., Goh, G. D., Goh, G. L., Tey, C. F., Tan, J. H. K., & Yeong, W. Y. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2021.100795 · Cited by 328 · cited 1×
“This study focuses on laser and electron beam PBF processes (L-PBF and EB-PBF respectively) only (an overview of the PBF process can be found in Gibson et al (2014), King et al (2015), Körner (2016), Spears and Gold (2016), Popov et al (2021), Sing et al (2021).”
Cited by
An overview of modern metal additive manufacturing technology
Armstrong, M., Mehrabi, H., & Naveed, N. (2022) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2022.10.060 · Cited by 549
Metadata
- Authors
- Grasso, M., Remani, A., Dickins, A., Colosimo, B. M., & Leach, R. K.
- Venue
- Measurement Science and Technology
- Publisher
- IOP Publishing
- Published
- 2021-07-15
- Volume
- 32
- Issue
- 11
- Pages
- 112001
- ISSN
- 0957-0233 (ISSN-L)
- 1361-6501
- OpenAlex
- W3172166634
- Cited by
- 223
- References
- 6
- FWCI
- 15.10
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.