The DOI matches its Crossref record; 29 of the 29 references it cites were found in a registry or an index.
A review of commercial high temperature superconducting materials for large magnets: from wires and tapes to cables and conductors
Open accessAbstract
High temperature superconducting (HTS) materials have the potential to generate a magnetic field beyond the level obtainable with low temperature superconducting (LTS) materials. This review reports on past and present R&D on HTS cables and conductors for high field tokamaks, accelerator dipoles, and large solenoids. Among the HTS wires and tapes available commercially, coated conductor tapes are the most appealing because of their outstanding critical strength and future improvement margin. Limitations are the weakness against peeling and delamination and the short piece length. The prices of technical superconductors are reviewed because they play an important role in large projects; moreover HTS wires and tapes are discussed from the perspective of industrial production considering the historical development of the LTS wire market. Various designs have been proposed for HTS cables and conductors: some are better suited for soft materials, while others can exploit the anisotropy of coated conductors (by aligning the tape with the field), thus providing the highest current density. Recently, there has been an increase in the size and complexity of the prototypes; however some peculiar features of HTS, such as high stability margins and high mechanical limits, have not yet been fully incorporated into the designs: for example the transposition requirements for HTS have not yet been studied in detail. There are elements indicating that rectangular wires and tapes (even if anisotropic) can be used for manufacturing cables and magnets of any size and have advantages with respect to round wires.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A New High-Tc Oxide Superconductor without a Rare Earth Element
Maeda, H., Tanaka, Y., Fukutomi, M., & Asano, T. (1988) · Japanese Journal of Applied Physics · doi:10.1143/jjap.27.l209 · Cited by 3,632
(2018) · The Wonders of Physics · doi:10.1142/9789813273177_0032 · Cited by 1,685
(1982) · Nature · doi:10.1038/299664a0 · Cited by 1,139
HTS Pancake Coils Without Turn-to-Turn Insulation
Hahn, S., Park, D. K., Bascunan, J., & Iwasa, Y. (2011) · IEEE Transactions on Applied Superconductivity · doi:10.1109/tasc.2010.2093492 · Cited by 760
Senatore, C., Alessandrini, M., Lucarelli, A., Tediosi, R., Uglietti, D., & Iwasa, Y. (2014) · Superconductor Science and Technology · doi:10.1088/0953-2048/27/10/103001 · Cited by 286
Self-citationProgress in the Development and Construction of a 32-T Superconducting Magnet
Weijers, H. W., Hannahs, S. T., Murphy, T., Markiewicz, W. D., Gavrilin, A. V., Voran, A. J., Viouchkov, Y. L., Gundlach, S. R., Noyes, P. D., Abraimov, D. V., et al. (2016) · IEEE Transactions on Applied Superconductivity · doi:10.1109/tasc.2016.2517022 · Cited by 244
Design of a Superconducting 32 T Magnet With REBCO High Field Coils
Markiewicz, W. D., Larbalestier, D. C., Weijers, H. W., Voran, A. J., Pickard, K. W., Sheppard, W. R., Jaroszynski, J., Xu, A., Walsh, R. P., Lu, J., et al. (2012) · IEEE Transactions on Applied Superconductivity · doi:10.1109/tasc.2011.2174952 · Cited by 211
Celentano, G., De Marzi, G., Fabbri, F., Muzzi, L., Tomassetti, G., Anemona, A., Chiarelli, S., Seri, M., Bragagni, A., & della Corte, A. (2014) · IEEE Transactions on Applied Superconductivity · doi:10.1109/tasc.2013.2287910 · Cited by 187
Field and temperature scaling of the critical current density in commercial REBCO coated conductors
Senatore, C., Barth, C., Bonura, M., Kulich, M., & Mondonico, G. (2016) · Superconductor Science and Technology · doi:10.1088/0953-2048/29/1/014002 · Cited by 171
Compact fusion energy based on the spherical tokamak
Sykes, A., Costley, A. E., Windsor, C. G., Asunta, O., Brittles, G., Buxton, P., Chuyanov, V., Connor, J. W., Gryaznevich, M. P., Huang, B., et al. (2018) · Nuclear Fusion · doi:10.1088/1741-4326/aa8c8d · Cited by 169
Braccini, V., Xu, A., Jaroszynski, J. J., Xin, Y., Larbalestier, D. C., Chen, Y., Carota, G., Dackow, J., Kesgin, I., Yao, Y., et al. (2010) · Superconductor Science and Technology · doi:10.1088/0953-2048/24/3/035001 · Cited by 153
HTS CroCo: A Stacked HTS Conductor Optimized for High Currents and Long-Length Production
Wolf, M. J., Fietz, W. H., Bayer, C., Schlachter, S. I., Heller, R., & Weiss, K. (2016) · IEEE Transactions on Applied Superconductivity · doi:10.1109/tasc.2016.2521323 · Cited by 129
Test of 60 kA coated conductor cable prototypes for fusion magnets
Uglietti, D., Bykovskiy, N., Sedlák, K., Stepanov, B., Wesche, R., & Bruzzone, P. (2015) · Superconductor Science and Technology · doi:10.1088/0953-2048/28/12/124005 · Cited by 109
Self-citationThe NHMFL 45-t hybrid magnet system: past, present, and future
Miller, J. R. (2003) · IEEE Transactions on Applied Superconductivity · doi:10.1109/tasc.2003.812673 · Cited by 105
Takayasu, M., Chiesa, L., Noyes, P. D., & Minervini, J. V. (2017) · IEEE Transactions on Applied Superconductivity · doi:10.1109/tasc.2017.2652328 · Cited by 105
Whyte, D. G., Minervini, J. V., LaBombard, B., Marmar, E., Bromberg, L., & Greenwald, M. (2016) · Journal of Fusion Energy · doi:10.1007/s10894-015-0050-1 · Cited by 97
Barth, C., Mondonico, G., & Senatore, C. (2015) · Archive ouverte UNIGE (University of Geneva) · Cited by 76
Record current density of 344 A mm −2 at 4.2 K and 17 T in CORC ® accelerator magnet cables
van der Laan, D. C., Weiss, J. D., Noyes, P. D., Trociewitz, U. P., Godeke, A., Abraimov, D. V., & Larbalestier, D. C. (2016) · Superconductor Science and Technology · doi:10.1088/0953-2048/29/5/055009 · Cited by 67
Manufacture and Test of Bi-2212 Cable-in-Conduit Conductor
Qin, J., Wu, Y., Li, J.-G., Mei, C., Liu, F., Liu, H., Pei-Hang, L., Li, C., Hao, Q.-B., Zhou, C., et al. (2017) · IEEE Transactions on Applied Superconductivity · doi:10.1109/tasc.2017.2652306 · Cited by 52
High-Temperature Superconductors: Materials, Properties, and Applications
Wesche, R. (1998) · Springer eBooks · doi:10.1007/978-1-4615-5075-4 · Cited by 45
Magnet design with 100-kA HTS STARS conductors for the helical fusion reactor
Yanagi, N., Terazaki, Y., Ito, S., Tamura, H., HAMAGUCHI, S., Mito, T., Hashizume, H., & Sagara, A. (2016) · Cryogenics · doi:10.1016/j.cryogenics.2016.06.011 · Cited by 37
Performance of a Cryogen-Free 30 T-Class Hybrid Magnet
Watanabe, K., Nishijima, G., Awaji, S., Takahashi, K., Koyama, K., Kobayashi, N. P., Ishizuka, M., Itou, T., Tsurudome, T., & Sakuraba, J. (2006) · IEEE Transactions on Applied Superconductivity · doi:10.1109/tasc.2006.870787 · Cited by 35
Performance evolution of 60 kA HTS cable prototypes in the EDIPO test facility
Bykovskiy, N., Uglietti, D., Sedlák, K., Stepanov, B., Wesche, R., & Bruzzone, P. (2016) · Superconductor Science and Technology · doi:10.1088/0953-2048/29/8/084002 · Cited by 31
Self-citationHeating and Loading Process Improvement for Indium Inserted Mechanical Lap Joint of REBCO Tapes
Nishio, T., Ito, S., & Hashizume, H. (2017) · IEEE Transactions on Applied Superconductivity · doi:10.1109/tasc.2017.2672691 · Cited by 30
Superconducting Magnets for Particle Accelerators
Bottura, L., Gourlay, S. A., Yamamoto, A., & Zlobin, A. V. (2015) · IEEE Transactions on Nuclear Science · doi:10.1109/tns.2015.2485159 · Cited by 29
Concept design of hybrid superconducting magnet for CFETR Tokamak reactor
Zheng, J., Song, Y., Liu, X., Li, J., Wan, Y., Ye, M., Ding, K., Wu, S., Xu, W., & Wei, J. (2013) · IEEE/NPSS Symposium on Fusion Engineering · doi:10.1109/sofe.2013.6635364 · Cited by 22
Impact of Indentation on the Critical Current of Bi2212 Round Wire
Qin, J., Dai, C., Wang, Q., Liu, P., Лю, Б., Liu, F., Wu, Y., Zhou, C., Hao, Q.-B., Li, C., et al. (2016) · IEEE Transactions on Applied Superconductivity · doi:10.1109/tasc.2016.2532324 · Cited by 19
Damage Investigations in the HTS Cable Prototype After the Cycling Test in EDIPO
Bykovskiy, N., Uglietti, D., Wesche, R., & Bruzzone, P. (2018) · IEEE Transactions on Applied Superconductivity · doi:10.1109/tasc.2018.2809509 · Cited by 11
Self-citationMechanically Reinforced Bi-2212 Strand
Tixador, P., Bruzek, C.-É., Vincent, B., Malgoli, A., & Chaud, X. (2014) · IEEE Transactions on Applied Superconductivity · doi:10.1109/tasc.2014.2373642 · Cited by 6
Cited by
VIPER: an industrially scalable high-current high-temperature superconductor cable
Hartwig, Z. S., Vieira, R. F., Sorbom, B. N., Badcock, R. A., Bajko, M., Beck, W. K., Castaldo, B., Craighill, C. L., Davies, M., Estrada, J., et al. (2020) · Superconductor Science and Technology · doi:10.1088/1361-6668/abb8c0 · Cited by 268
Metadata
- Authors
- Uglietti, D.
- Venue
- Superconductor Science and Technology
- Publisher
- IOP Publishing
- Published
- 2019-04-09
- Volume
- 32
- Issue
- 5
- Pages
- 053001
- ISSN
- 0953-2048 (ISSN-L)
- 1361-6668
- OpenAlex
- W2938546415
- Cited by
- 310
- References
- 29
- FWCI
- 8.38
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.