The DOI matches its Crossref record.
Field and temperature scaling of the critical current density in commercial REBCO coated conductors
Open accessAbstract
Abstract Scaling relations describing the electromagnetic behaviour of coated conductors (CCs) greatly simplify the design of REBCO-based devices. The performance of REBCO CCs is strongly influenced by fabrication route, conductor architecture and materials, and these parameters vary from one manufacturer another. In the present work we have examined the critical surface for the current density, J c ( T , B , θ ), of coated conductors from six different manufacturers: American Superconductor Co. (US), Bruker HTS GmbH (Germany), Fujikura Ltd (Japan), SuNAM Co. Ltd (Korea), SuperOx ZAO (Russia) and SuperPower Inc. (US). Electrical transport and magnetic measurements were performed at temperatures between 4.2 K and 77 K and in magnetic fields of up to 19 T. Experiments were conducted at three different orientations of the field with respect to the crystallographic c -axis of the REBCO layer, θ = 0°, 45° and 90°, in order to probe the angular anisotropy of J c . In spite of the large variability of the CCs’ performance, we show here that field and temperature dependences of J c at a given angle can be reproduced over wide ranges using a scaling relation based only on three parameters. Furthermore, we present and validate a new approach combining magnetic and transport measurements for the determination of the scaling parameters with minimal experimental effort.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Uglietti, D. (2019) · Superconductor Science and Technology · doi:10.1088/1361-6668/ab06a2 · Cited by 310
Conceptual magnet design study for fusion nuclear science facility
Zhai, Y., Titus, P., Kessel, C., & El-Guebaly, L. (2018) · Fusion Engineering and Design · doi:10.1016/j.fusengdes.2017.06.028 · Cited by 42
Devitre, A. R., Fischer, D. X., Woller, K. B., Clark, B. C., Short, M. P., Whyte, D. G., & Hartwig, Z. S. (2024) · Review of Scientific Instruments · doi:10.1063/5.0200936 · Cited by 15
Metadata
- Authors
- Senatore, C., Barth, C., Bonura, M., Kulich, M., & Mondonico, G.
- Venue
- Superconductor Science and Technology
- Publisher
- IOP Publishing
- Published
- 2015-12-03
- Volume
- 29
- Issue
- 1
- Pages
- 014002
- ISSN
- 0953-2048 (ISSN-L)
- 1361-6668
- OpenAlex
- W2190378237
- Cited by
- 171
- References
- 0
- FWCI
- 6.45
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Field and temperature scaling of the critical current density in commercial REBCO coated conductors. https://app.cochat.ai/papers/10.1088/0953-2048/29/1/014002
- The paper
- Senatore, C., Barth, C., Bonura, M., Kulich, M., & Mondonico, G. (2016). Field and temperature scaling of the critical current density in commercial REBCO coated conductors. Superconductor Science and Technology. https://doi.org/10.1088/0953-2048/29/1/014002
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.