The DOI matches its Crossref record; 59 of the 59 references it cites were found in a registry or an index; 14 of the 44 sources its claims cite were checked for support.
Life-cycle carbon footprint and total production potential of cross-laminated timber from California’s wildland-urban interface
Open accessAbstract
The frequency, scale, and severity of wildfires are steadily increasing in the Western United States. Sustainable forest management practices through forest thinning could reduce the impact of wildfires and provide lumber for wood-based, long-lived, and low-carbon building materials. This study explores the potential for harvesting biomass in California (CA) to mitigate wildfire risk and provide multi-decade carbon storage in the form of cross-laminated timber (CLT) for use in buildings. First, we assessed biomass resource availability, finding that the total live hardwood and live softwood available in the wildland-urban interfaces (WUIs) across CA sums to 14.1 million metric tons (MMT) and 34.9 MMT, respectively, which contains the equivalent of 90 MMT of atmospheric carbon dioxide. Then, we conducted a life cycle assessment of CLT considering softwood and hardwood sources to provide insights into emissions and energy demand associated with utilization of the wood removed for wildfire risk management. We found that the net life cycle carbon footprint of live hardwood and softwood when including biogenic carbon storage/emissions is 414 and 317 kg CO 2 e/m 3 CLT, respectively. To incorporate the timing of these emissions and uptake, we have also conducted a cradle-to-grave time-dependent global warming potential (GWP) analysis. The time-adjusted GWP for live hardwood and live softwood is −227 and −104 kg CO 2 e/m 3 CLT, respectively. In terms of total CLT production potential, 0.03 and 0.005 million m 3 CLT can be sourced from live softwood and hardwood, respectively, in WUI on gentle slopes in CA. The resulting insights and approaches from this study are broadly applicable to other forested regions and WUIs across the US and the world, and provide a holistic approach to use forest thinning as a wildfire mitigation strategy in combination with a novel approach for life cycle assessment of building materials with a limited dataset.
Overview
CoChat Summary
TL;DR
This study estimates biomass availability in California’s fire-prone wildland-urban interface and assesses life-cycle carbon and energy impacts of making cross-laminated timber (CLT) from live and dead mixed hardwood/softwood removed by thinning. It finds large potential feedstock and net cradle-to-grave footprints of 414 and 317 kg CO2e/m³ CLT for live hardwood and softwood, with time-adjusted GWP of −227 and −104 kg CO2e/m³ CLT.
Key findings
- California’s fire-prone WUI contains 14.1 MMT of live hardwood and 34.9 MMT of live softwood, equivalent to 90 MMT of atmospheric CO2; dead biomass totals include 60, 59, and 67 MMT of dead softwood and 4.6, 8.5, and 17.8 MMT of dead hardwood on gentle, moderate, and steep slopes, respectively.
- At a 0.2% removal rate, gentle slopes could yield 0.005 and 0.03 million m³ CLT from live hardwood and softwood, and 0.01 and 0.22 million m³ CLT from dead hardwood and softwood; live gentle-slope wood could supply walls for 8,064 two-story buildings, while dead wood could supply 2,445 and 45,171 buildings from hardwood and softwood.
- Net cradle-to-grave carbon footprints including biogenic storage/emissions are 414 kg CO2e/m³ CLT for live hardwood and 317 kg CO2e/m³ CLT for live softwood; dead softwood and dead hardwood are 214 and 306 kg CO2e/m³ CLT.
- Time-adjusted GWP is −227 kg CO2e/m³ CLT for live hardwood and −104 kg CO2e/m³ CLT for live softwood; sawmill operations contribute 13% and 25% of total emissions for live hardwood and live softwood, and wood waste meets 64% of live softwood sawmill energy demand and 70% for dead softwood.
Methods
- Biomass availability was estimated from USDA 2021 aboveground live biomass (>2.5 cm d.b.h.) and standing dead trees, restricted to fire-prone WUI with high/very high wildfire hazard; slopes were split into gentle (0%–20%), moderate (21%–40%), and steep (>41%), with assumptions of 0.2% removal, 75% aboveground biomass as stem, 1.21 m³ wood per m³ oven-dry CLT, and 4.93 m³ CLT walls per 93 m² two-story building.
- Life-cycle assessment used a functional unit of 1 m³ CLT, cradle-to-grave, with the Agile-C2G physical input-output LCI model, GREET/USLCI/Ecoinvent/EPA data, IPCC AR6 100-year GWP, 2023 CAMX eGRID electricity, a 50-year service life, end-of-life combustion in a biomass power plant, and time-adjusted warming potentials via D-CUBE; conservative and aggressive sensitivity cases were also presented.
- Densities at 12% moisture content were 445 kg/m³ for live softwood, 577 kg/m³ for live hardwood, 334 kg/m³ for dead softwood, and 473 kg/m³ for dead hardwood, with carbon assumed at 50% of total wood.
Limitations
- The paper states that forest carbon fluxes attributable to forest management are outside scope, maintenance/use-phase inputs are excluded, steep-slope harvesting and cable/mechanized systems are beyond scope, and dead wood cause-of-death, decay, structural suitability, biodiversity trade-offs, and future grid decarbonization are not fully modeled.
- The paper states that realizing the estimated CLT production and carbon storage requires sustainable thinning and local processing capacity; it notes 26 operational wood processing mills in California in 2024, none reporting hardwood processing, and that the 0.2% removal rate is conservative relative to typical thinning rates that can exceed 50%.
- Evident from the text: hardwood CLT manufacturing data are limited, the feedstock is treated as burden-free, results depend on end-of-life disposal choice and timing assumptions, and the abstract reports −227 kg CO2e/m³ for live hardwood TAWP while the results text gives −226 kg CO2e/m³.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
12 Valid · 5 Not valid · 21 Not checked · 69 Own results and interpretations
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“CLT can be manufactured using out-ofgrade/small-diameter mixed species logs that are removed during thinning but have little to no other commercial value [23].”
What the sources say
- Partly supportedcites [23] Chen, 2019, Life cycle assessment (LCA) of cross-laminated timber (CLT) produced in Western Washington: the role of logistics and wood species mix, Sustainability sourceExperimental — accuracy not yet measured
The Introduction says CLT can be made using small-diameter trees with low or no commercial value. Section 2.5 considers mixed wood species and different lumber grades. Our copy does not establish that the logs are removed during thinning or that they are out-of-grade. (LLM, conf=0.87)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Partly supported
The cited sources that could be checked couldn’t confirm or dispute this claim.
In the paper
“although there are over 8 MMTs of annual removals of above ground biomass in the state [80].”
What the sources say
- Could not verifycites [80] Rasker, 2021 sourceExperimental — accuracy not yet measured
The paper’s main text discusses claims about energy medicine and physics, not California biomass. Searches for “8 MMTs,” annual above-ground biomass removals, and California found no relevant passage in our copy. (LLM, conf=0.78)
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Could not verify
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“GHG emissions and energy demand for processing mixed live softwood in sawmills are consistent with the values for softwood lumber preparation in previous studies [55, 73-76].”
What the sources say
- Not checked — no full text of the sourcecites [55] Milota, 2017, Life cycle assessment for the cradle-to-gate production of softwood lumber in the PNW and SE regions, For. Products J. source
- Not checked — no full text of the sourcecites [73] Loeffler, 2016, On-site energy consumption at softwood sawmills in Montana, For. Products J. source
- Not checked — no full text of the sourcecites [74] Sahoo, 2021, Life-cycle assessment of redwood lumber products in the US, Int. J. Life Cycle Assess. source
- Not checked — no full text of the sourcecites [75] Puettmann, 2019, Life cycle energy and environmental impacts of cross laminated timber made with coastal Douglas-fir, J. Green Build. source
- Partly supportedcites [76] Lan, 2020, Dynamic life cycle carbon and energy analysis for cross-laminated timber in the Southeastern United States, Environ. Res. Lett. sourceExperimental — accuracy not yet measured
Section 2.2, “Lumber production” (page unavailable), estimates GHG emissions and primary energy consumption for lumber-mill operations. Section 3, “Results and discussion” (page unavailable), says the study’s fossil-based GHG emissions are consistent with previous studies, but that comparison is for finished cross-laminated timber, not softwood lumber preparation. It does not establish that the sawmill energy-demand values are consistent with previous studies. (LLM, conf=0.84)
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Rests on 5 assumptions not shown here.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“0.03 and 0.005 million m 3 CLT can be sourced from live softwood and hardwood, respectively, in WUI on gentle slopes in CA.”
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Rests on 5 assumptions not shown here.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“0.03 and 0.005 million m 3 CLT can be sourced from live softwood and hardwood, respectively, in WUI on gentle slopes in CA.”
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Rests on 5 assumptions not shown here.
58 more claims
Create a free account to see all 107 claims and every source verdict.
- It may state two separate claims as one. 21
- Probably not a substantial claim. 32
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Each contradiction between two passages listed here was confirmed by an independent check.
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ Abstract · p. 3
“The time-adjusted GWP for live hardwood and live softwood is -227 and -104 kg CO2e/m 3 CLT, respectively.”
§ 3. Results · p. 10
“CLT sourced from live hardwood and live softwood results in sequestration of -226 and -104 kg CO2e/m 3 over the life-cycle”
Citations
Cites
US Environmental Protection Agency
(1998) · Choice Reviews Online · doi:10.5860/choice.35-4455 · Cited by 5,897
Inventory of U.S. Greenhouse Gas Emissions and Sinks
Hockstad, L., & Hanel, L. (2018) · University of North Texas Digital Library (University of North Texas) · doi:10.15485/1464240 · Cited by 2,821 · cited 1×
“In 2022, forest fires emitted approximately 129.2 million metric tons (MMT) CO 2 e in the US, a 135% increase relative to 1990 [1].”
InfluentialComparison of Environmental Effects of Steel- and Concrete-Framed Buildings
Guggemos, A. A., & Horvath, A. (2005) · Journal of Infrastructure Systems · doi:10.1061/(asce)1076-0342(2005)11:2(93 · Cited by 356
Specific gravity and other properties of wood and bark for 156 tree species found in North America
Miles, P. D., & Smith, W. B. (2009) · doi:10.2737/nrs-rn-38 · Cited by 298
Nordahl, S. L., Devkota, J. P., Amirebrahimi, J., Smith, S. J., Breunig, H. M., Preble, C. V., Satchwell, A. J., Jin, L., Brown, N. J., Kirchstetter, T. W., et al. (2020) · Environmental Science & Technology · doi:10.1021/acs.est.0c00364 · Cited by 205
Self-citationCross-laminated timber for building construction: a life-cycle-assessment overview
Younis, A., & Dodoo, A. (2022) · Journal of Building Engineering · doi:10.1016/j.jobe.2022.104482 · Cited by 175 · cited 2×
“Research of building materials uses life-cycle assessment (LCA) as a means of holistically quantifying GHG emissions across a product’s life-time (i.e. ‘cradle to grave’) [27].”
Pierobon, F., Huang, M., Simonen, K., & Ganguly, I. (2019) · Journal of Building Engineering · doi:10.1016/j.jobe.2019.100862 · Cited by 168 · cited 4×
“A promising application for wood harvested during forest thinning for wildfire resilience is its use as cross-laminated timber (CLT), a structural building material, which was first introduced in the 1990’s and began gaining in popularity in the early 2000’s [21, 22].”
InfluentialHigh wildfire damage in interface communities in California
Kramer, H. A., Mockrin, M. H., Alexandre, P. M., & Radeloff, V. C. (2019) · International Journal of Wildland Fire · doi:10.1071/wf18108 · Cited by 163 · cited 1×
“The 2017 Tubbs fire in Northern CA that destroyed 5600 + buildings, and the 2025 wildfire in Los Angeles are examples of catastrophic WUI wildfires in CA in recent history [6, 7].”
Mäkipää, R., Abramoff, R., Adamczyk, B., Baldy, V., Biryol, C., Bosela, M., Casals, P., Curiel Yuste, J., Dondini, M., Filipek, S., et al. (2023) · Forest Ecology and Management · doi:10.1016/j.foreco.2022.120637 · Cited by 158
Andersen, J. H., Rasmussen, N. L., & Ryberg, M. W. (2021) · Energy and Buildings · doi:10.1016/j.enbuild.2021.111604 · Cited by 147
Research works printed but not linked: 1
- Wildifre Resilience and Biomass Supply, 2023, Joint IEA bioenergy task 43 and university Laval workshop
Cited by
Prakosa, G. G., Larasatie, P., Winans, K. S., Goben, A., Hindman, D. P., & Bond, B. (2026) · Sustainability · doi:10.3390/su18126291 · Cited by 2
A framework for ground-up life cycle assessment of novel, carbon-storing building materials
Kane, S., Bose, B., Hendrickson, T. P., Jin, F., Nordahl, S. L., Scown, C. D., & Miller, S. A. (2025) · Energy & Environmental Science · doi:10.1039/d5ee02728d · Cited by 3
Self-citationDynamic carbon accounting alters the interpretation of emissions in forest–wood product systemsPreprint
Qian, Y., Gunawardena, T., Mendis, P., & Aye, L. (2026) · SSRN Electronic Journal · doi:10.2139/ssrn.6187371
Dynamic carbon accounting alters the interpretation of emissions in forest–wood product systemsPreprint
Qian, Y., Gunawardena, T., Mendis, P., & Aye, L. (2026) · SSRN Electronic Journal · doi:10.2139/ssrn.6187370
Fu, H., Li, Z., Wang, X., & He, M. (2026) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2026.147395 · Cited by 2
Metadata
- Authors
- Bose, B., Hendrickson, T. P., Nordahl, S. L., Kane, S., Fan, J., Miller, S. A., & Scown, C. D.
- Affiliations
- Lawrence Berkeley National Laboratory (US)
- University of California, Davis (US)
- Corresponding author
- Bose, Baishakhi
- Hendrickson, Thomas P
- Nordahl, Sarah L
- Kane, Seth
- Miller, Sabbie A
- Scown, Corinne D
- ORCID
- Venue
- Environmental Research Letters
- Publisher
- IOP Publishing
- Published
- 2025-08-19
- Volume
- 20
- Issue
- 9
- Pages
- 094046
- ISSN
- 1748-9326 (ISSN-L)
- OpenAlex
- W4413049615
- Cited by
- 5
- References
- 55
- Citations by year
- 2026: 4 · 2025: 1
- FWCI
- 1.38
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- cc-by
- creativecommons.org/licenses/by/4.0/ (vor)
- iopscience.iop.org/info/page/text-and-data-mining (tdm)
- Locations
- Environmental Research Letters (publishedVersion, cc-by)
- eScholarship (California Digital Library) (submittedVersion, cc-by)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- Advanced Research Projects Agency - Energy (DE-AR0001625)
- Lawrence Berkeley National Laboratory (DE-AC02-05CH11231)
- Topics
- Physical Sciences › Environmental Science › Environmental Engineering › Environmental Impact and Sustainability
- Life Sciences › Agricultural and Biological Sciences › Forestry › Forest Management and Policy
- Life Sciences › Agricultural and Biological Sciences › Forestry › Wood Residue Utilization and Solid Biofuels
- Keywords
- cross-laminated timber, life cycle carbon footprint, wildland-urban interface, forest thinning, wildfire risk management, biogenic carbon storage, California forests, low-carbon building materials
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-09-30, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-09-30 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Life-cycle carbon footprint and total production potential of cross-laminated timber from California’s wildland-urban interface. https://app.cochat.ai/papers/10.1088/1748-9326/adf868
- The paper
- Bose, B., Hendrickson, T. P., Nordahl, S. L., Kane, S., Fan, J., Miller, S. A., & Scown, C. D. (2025). Life-cycle carbon footprint and total production potential of cross-laminated timber from California’s wildland-urban interface. Environmental Research Letters. https://doi.org/10.1088/1748-9326/adf868
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.