The high temperature flow behavior of additively manufactured Inconel 625 superalloy
The DOI matches its Crossref record; 38 of the 38 references it cites were found in a registry or an index.
Abstract
The combination of Inconel material properties and the geometric freedom of additive manufacturing provides special opportunity for the production of engineered structures with exceptional strength and stability at elevated temperatures. The present work deals with the high temperature flow behavior of an additively manufactured Inconel 625 superalloy in a wide temperature range of 800 °C–1100 °C under the various strain rates of 0.001, 0.01, and 0.1 s −1 . The strain hardening rate analysis was utilized to reveal the critical condition for the occurrence of the restoration processes. The additively manufactured material was capable to be dynamically recrystallized at various thermomechanical conditions. In this regard, the effect of the Zener–Hollomon parameter (Z) on the characteristic points of the flow curves (critical, peak and steady state stresses and strains) was studied using the power law relations. A phenomenological hyperbolic sine constitutive model was proposed to predict the high temperature flow behavior of the manufactured material; and the model was modified considering the effect of imposed strain. Interestingly, the flow stress levels and the average hot deformation activation energy for the additively manufactured Inconel 625 alloy were found to be lower than that for the same alloy which have been fabricated through hot forging. This was attributed to the complex alloy composition and the specified solidified microstructure of the additively manufactured materials.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Effect of Strain Rate Upon Plastic Flow of Steel
Zener, C., & Hollomon, J. H. (1944) · Journal of Applied Physics · doi:10.1063/1.1707363 · Cited by 2,844
Dinda, G. P., Dasgupta, A. K., & Mazumder, J. (2009) · Materials Science and Engineering: A · doi:10.1016/j.msea.2009.01.009 · Cited by 858
Constitutive modeling for elevated temperature flow behavior of 42CrMo steel
Lin, Y. C., Chen, M.-S., & Zhong, J. (2008) · Computational Materials Science · doi:10.1016/j.commatsci.2007.08.011 · Cited by 619
Microstructure Characteristics of Inconel 625 Superalloy Manufactured by Selective Laser Melting
Li, S., Wei, Q., Shi, Y., Zhu, Z., & Zhang, D. (2015) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2014.09.020 · Cited by 526
Initiation of Dynamic Recrystallization in Constant Strain Rate Hot Deformation
Poliak, E. I., & Jonas, J. J. (2003) · ISIJ International · doi:10.2355/isijinternational.43.684 · Cited by 472
Yang, Q., Zhang, P., Cheng, L., Min, Z., Chyu, M., & To, A. C. (2016) · Additive Manufacturing · doi:10.1016/j.addma.2016.06.012 · Cited by 242
Pleass, C., & Jothi, S. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2018.09.023 · Cited by 217
Creep properties of different γ′-strengthened Co-base superalloys
Bauer, A., Neumeier, S., Pyczak, F., Singer, R. F., & Göken, M. (2012) · Materials Science and Engineering: A · doi:10.1016/j.msea.2012.04.083 · Cited by 195
Paydas, H., Mertens, A., Carrus, R., Lecomte-Beckers, J., & Tchoufang Tchuindjang, J. (2015) · Materials & Design · doi:10.1016/j.matdes.2015.07.035 · Cited by 194
Haghdadi, N., Zarei-Hanzaki, A., & Abedi, H. R. (2012) · Materials Science and Engineering: A · doi:10.1016/j.msea.2011.12.076 · Cited by 186
Self-citationGonzalez, J. A., Mireles, J., Stafford, S. W., Perez, M. A., Terrazas, C. A., & Wicker, R. B. (2019) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2018.08.031 · Cited by 186
Deformation characteristics of isothermally forged UDIMET 720 nickel-base superalloy
Monajati, H., Taheri, A. K., Jahazi, M., & Yue, S. (2005) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-005-0284-z · Cited by 179
Zhao, J., Ding, H., Zhao, W., Huang, M., Wei, D., & Jiang, Z. (2014) · Computational Materials Science · doi:10.1016/j.commatsci.2014.05.040 · Cited by 177
Sabokpa, O., Zarei-Hanzaki, A., Abedi, H. R., & Haghdadi, N. (2012) · Materials & Design · doi:10.1016/j.matdes.2012.03.002 · Cited by 172
Self-citationZhao, Y., Sun, J., Li, J., Yan, Y., & Wang, P. (2017) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2017.06.251 · Cited by 148
Ramkumar, K. D., Abraham, W. S., Viyash, V., Arivazhagan, N., & Rabel, A. M. (2017) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2016.12.018 · Cited by 144
Additive layer manufacture of Inconel 625 metal matrix composites, reinforcement material evaluation
Cooper, D. E., Blundell, N., Maggs, S. J., & Gibbons, G. J. (2013) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2013.06.021 · Cited by 138
He, D., Lin, Y. C., Chen, J., Chen, D., Huang, J., Tang, Y. P., & Chen, M.-S. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.05.022 · Cited by 136
Bi, G., Sun, C., Chen, H.-C., Ng, F. L., & Khin, C. C. (2014) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2014.04.020 · Cited by 135
Wen, D.-X., Lin, Y. C., & Zhou, Y. (2017) · Vacuum · doi:10.1016/j.vacuum.2017.04.030 · Cited by 129
Baldridge, T., Poling, G., Foroozmehr, E., Kovacevic, R., Metz, T. E., Kadekar, V., & Gupta, M. C. (2012) · Optics and Lasers in Engineering · doi:10.1016/j.optlaseng.2012.08.006 · Cited by 116
Selection of powder or wire feedstock material for the laser cladding of Inconel® 625
Heigel, J. C., Gouge, M., Michaleris, P., & Palmer, T. A. (2016) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2016.01.004 · Cited by 106
Microstructure and mechanical properties of Inconel 625/nano-TiB2 composite fabricated by LAAM
Zhang, B., Bi, G., Wang, P., Bai, J., Chew, Y., & Nai, M. L. S. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.08.078 · Cited by 97
Kumar, S. S. S., Raghu, T., Bhattacharjee, P. P., Rao, G. A., & Borah, U. (2015) · Journal of Materials Science · doi:10.1007/s10853-015-9200-0 · Cited by 92
Characterization of hot deformation behavior of Haynes230 by using processing maps
Liu, Y., Hu, R., Li, J., Kou, H., Li, H., Chang, H., & Fu, H. (2008) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2008.09.024 · Cited by 91
Nd:YAG laser cladding of Co–Cr–Mo alloy on γ-TiAl substrate
Barekat, M., Razavi, R. S., & Ghasemi, A. (2016) · Optics & Laser Technology · doi:10.1016/j.optlastec.2016.01.003 · Cited by 89
Shen, M.-Y., Tian, X., Liu, D., Tang, H., & Cheng, X. (2017) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2017.10.280 · Cited by 89
Hot working characteristics of nickel-base superalloy 740H during compression
Wang, J., Dong, J., Zhang, M., & Xie, X. (2013) · Materials Science and Engineering A · doi:10.1016/j.msea.2012.12.077 · Cited by 84
Diode laser cladding of Fe-based alloy on ductile cast iron and related interfacial behavior
Weng, Z., Wang, A., Wang, Y., Xiong, D., & Tang, H. (2015) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2015.12.031 · Cited by 77
Han, F., Tang, B., Kou, H., Cheng, L., Li, J., & Feng, Y. (2014) · Journal of Materials Science · doi:10.1007/s10853-014-8031-8 · Cited by 50
Han, F., Tang, B., Kou, H., Li, J., & Feng, Y. (2013) · Journal of Materials Science · doi:10.1007/s10853-013-7530-3 · Cited by 48
Mathematical modeling of the hot-deformation behavior of superalloy IN718
Zhang, J. M., Gao, Z. Y., Zhuang, J. Y., & Zhong, Z.-Y. (1999) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-999-0310-7 · Cited by 47
Investigation on hot workability characteristics of Inconel 625 superalloy using processing maps
Guo, S., Li, D., Guo, Q., Wu, Z., Haijian, P., & Hu, J. (2012) · Journal of Materials Science · doi:10.1007/s10853-012-6488-x · Cited by 46
Bi, Z., Zhang, M., Dong, J., Luo, K., & Wang, J. (2010) · Materials Science and Engineering A · doi:10.1016/j.msea.2010.03.075 · Cited by 46
Lin, Y. C., Fang, X.-L., & Wang, Y. P. (2008) · Journal of Materials Science · doi:10.1007/s10853-008-2832-6 · Cited by 46
Hot deformation characteristics and strain-dependent constitutive analysis of Inconel 600 superalloy
Wu, H.-Y., Zhu, F.-J., Wang, S.-C., Wang, W.-R., Wang, C.-C., & Chiu, C.-H. (2012) · Journal of Materials Science · doi:10.1007/s10853-012-6250-4 · Cited by 37
Nie, L., Zhang, L., Zhu, Z. S., & Xu, W. (2013) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-013-0699-4 · Cited by 24
Sheppard, T., & Duan, X. (2003) · Journal of Materials Science · doi:10.1023/a:1023283911730 · Cited by 14
Research works printed but not linked: 1
- 10.1016/j.matdes.2016.08.078 · DOI
Cited by
Ahmadi, M., Tabary, S. A. A. B., Rahmatabadi, D., Ebrahimi, M. S., Abrinia, K., & Hashemi, R. (2022) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2022.05.102 · Cited by 232
Self-citationMotallebi, R., Savaedi, Z., & Mirzadeh, H. (2022) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2022.100992 · Cited by 178
Dejene, N. D., & Lemu, H. G. (2023) · Metals · doi:10.3390/met13020424 · Cited by 165
“According to Abedi et al. [126] The process variables such as temperature, strain and strain rate have a direct impact on the suggested constitutive equations’ precision and repeatability.”
BackgroundRahmatabadi, D., Ghasemi, I., Baniassadi, M., Abrinia, K., & Baghani, M. (2023) · Journal of Materials Science · doi:10.1007/s10853-023-08460-0 · Cited by 130
Self-citationMoradi, M., Aminzadeh, A., Rahmatabadi, D., & Hakimi, A. (2021) · Materials Research Express · doi:10.1088/2053-1591/abe8f3 · Cited by 111
Self-citation
Metadata
- Authors
- Abedi, H. R., Hanzaki, A. Z., Azami, M., Kahnooji, M., & Rahmatabadi, D.
- Affiliations
- University of Tehran (IR)
- Corresponding author
- Abedi, H R
- Venue
- Materials Research Express
- Publisher
- IOP Publishing
- Published
- 2019-09-25
- Volume
- 6
- Issue
- 11
- Pages
- 116514
- ISSN
- 2053-1591 (ISSN-L)
- OpenAlex
- W2973846890
- Cited by
- 63
- References
- 38
- Citations by year
- 2026: 4 · 2025: 7 · 2024: 18 · 2023: 19 · 2022: 5 · 2021: 7 · 2020: 3
- FWCI
- 2.21
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- iopscience.iop.org/info/page/text-and-data-mining (tdm)
- iopscience.iop.org/page/copyright (vor)
- Locations
- Materials Research Express (publishedVersion)
- Topics
- Physical Sciences › Engineering › Mechanics of Materials › Metallurgy and Material Forming
- Physical Sciences › Engineering › Mechanical Engineering › High Temperature Alloys and Creep
- Physical Sciences › Engineering › Mechanics of Materials › High-Velocity Impact and Material Behavior
- Keywords
- Inconel 625, nickel-based superalloy, additive manufacturing, high-temperature flow behavior, high-temperature deformation, strain hardening, dynamic recrystallization, Zener-Hollomon parameter, hyperbolic sine constitutive model, flow stress, activation energy, strain rate sensitivity, solidification microstructure
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.