The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Review of selective laser melting of magnesium alloys: advantages, microstructure and mechanical characterizations, defects, challenges, and applications
Open accessAbstract
As one of the light materials with superior biocompatible properties, magnesium has drawn more attention in recent years. More industries, such as the automotive, aerospace, and medical, are adopting new strategies to employ this material. Mg-based batteries with potential advantages over Li-based batteries are also predicted to be used in electric vehicles shortly. However, significant problems in the production of Mg, such as its low ductility at ambient temperature and high oxidation and flammability at high operating temperatures, have limited its application. Therefore, selecting an appropriate manufacturing method can lessen or resolve Mg's drawbacks. Castings, different traditional forming and Severe Plastic Deformation (SPD) methods, and alloying of Mg with other elements are among the most popular fabrication and processing techniques to improve Mg properties and expand its application. However, as an innovative Additive Manufacturing (AM) method, the Selective Laser Melting (SLM) is considered a more reliable way of producing Mg-based products, especially for applications with complex geometry design, the least amount of waste, and no need for molds and accessories. Of course, SLM also has its challenges, such as the strong dependence of the properties on printing parameters and the raw material; however, apparent horizons can be imagined for SLM of Mg according to recent developments and research. This paper summarizes the SLM of Mg by introducing the SLM parameters, properties, defects, and applications of SLMed Mg alloys and discussing the challenges and solutions of this method. The impact of the SLM parameters and initial Mg powder characteristics as the primary inputs of this method on the resultant properties of the SLMed Mg components and the potential defects are thoroughly discussed. The thermal zones produced in the SLM process of Mg are divided into four categories, which are strongly influenced by the printing parameters and, on the other hand, affect the quality of the final product so that a high relative density of 99% and the much better mechanical and microstructural properties than those produced via other conventional methods, such as casting are achieved by adjusting the printing parameters. The characterization of the primary powder is divided into two categories: morphology and particle size, along with chemical composition. Morphology and chemical composition play an essential role in the final part by affecting the alloy's flowability, oxidation, and ignition. Characterization of properties is also reviewed in three general densifications, mechanical properties, and microstructure of SLMed samples and their dependence on parameters and input materials. Finally, the defects and challenges are briefly discussed, and the applications of Mg alloys in two widely used areas, including automotive and medicine, are presented.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Metal Additive Manufacturing: A Review
Frazier, W. E. (2014) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-014-0958-z · Cited by 5,984
Review of selective laser melting: Materials and applications
Yap, C. Y., Chua, C. K., Dong, Z. L., Liu, Z. H., Zhang, D. Q., Loh, L. E., & Sing, S. L. (2015) · Applied Physics Reviews · doi:10.1063/1.4935926 · Cited by 2,353
The high temperature flow behavior of additively manufactured inconel 625 superalloy
Abedi, H. R., Hanzaki, A. Z., Azami, M., Kahnooji, M., & Rahmatabadi, D. (2019) · Materials Research Express · doi:10.1088/2053-1591/ab44f6 · Cited by 63
Self-citation
Cited by
Various FDM Mechanisms Used in the Fabrication of Continuous-Fiber Reinforced Composites: A Review
Karimi, A., Rahmatabadi, D., & Baghani, M. (2024) · Polymers · doi:10.3390/polym16060831 · Cited by 201
Self-citationAzami, M., Siahsarani, A., Hadian, A., Kazemi, Z., Rahmatabadi, D., Kashani-Bozorg, S. F., & Abrinia, K. (2023) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2023.03.181 · Cited by 57
Self-citationWang, Z., Liu, B., Yin, B., Zheng, Y., Tian, Y., & Wen, P. (2022) · Frontiers in Chemistry · doi:10.3389/fchem.2022.1066103 · Cited by 30
“L-PBF, which is a technique widely applied in the AM of Mg alloys, indicating that the relationship between L-PBF and biomechanical properties has become a relatively novel popular research topic (Ahmadi et al., 2022).”
Method
Metadata
- Authors
- Ahmadi, M., Tabary, S. A. A. B., Rahmatabadi, D., Ebrahimi, M. S., Abrinia, K., & Hashemi, R.
- Venue
- Journal of Materials Research and Technology
- Publisher
- Elsevier BV
- Published
- 2022-07
- Volume
- 19
- Pages
- 1537-1562
- ISSN
- 2214-0697 (ISSN-L)
- 2238-7854
- OpenAlex
- W4281566654
- Cited by
- 232
- References
- 3
- FWCI
- 17.92
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Review of selective laser melting of magnesium alloys: advantages, microstructure and mechanical characterizations, defects, challenges, and applications. https://app.cochat.ai/papers/10.1016/j.jmrt.2022.05.102
- The paper
- Ahmadi, M., Tabary, S. A. A. B., Rahmatabadi, D., Ebrahimi, M. S., Abrinia, K., & Hashemi, R. (2022). Review of selective laser melting of magnesium alloys: advantages, microstructure and mechanical characterizations, defects, challenges, and applications. Journal of Materials Research and Technology. https://doi.org/10.1016/j.jmrt.2022.05.102
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.