The DOI matches its Crossref record; 52 of the 52 references it cites were found in a registry or an index; none of the 26 sources its claims cite is checked for support yet.
Validation of FABDEM, a global bare-earth elevation model, against UAV-lidar derived elevation in a complex forested mountain catchment
Open accessAbstract
Space-based, global-extent digital elevation models (DEMs) are key inputs to many Earth sciences applications. However, many of these applications require the use of a ‘bare-Earth’ DEM versus a digital surface model (DSM), the latter of which may include systematic positive biases due to tree canopies in forested areas. Critical topographic features may be obscured by these biases. Vegetation-free datasets have been created by using statistical relationships and machine learning to train on local-scale datasets (e.g., lidar) to de-bias the global-extent datasets. Recent advances in satellite platforms coupled with increased availability of computational resources and lidar reference products has allowed for a new generation of vegetation- and urban-canopy removals. One of these is the Forest And Buildings removed Copernicus DEM (FABDEM), based on the most recent and most accurate global DSM Copernicus-30. Among the more challenging landscapes to quantify surface elevations are densely forested mountain catchments, where even airborne lidar applications struggle to capture surface returns. The increasing affordability and availability of UAV-based lidar platforms have resulted in new capacity to fly modest spatial extents with unrivalled point densities. These data allow an unprecedented ability to validate global sub-canopy DEMs against representative UAV-based lidar data. In this work, the FABDEM is validated against up-scaled lidar data in a steep and forested mountain catchment considering elevation, slope, and Terrain Position Index (TPI) metrics. Comparisons of FABDEM with SRTM, MERIT, and the Copernicus-30 dataset are made. It was found that the FABDEM had a 24% reduction in elevation RMSE and a 135% reduction in bias compared to the Copernicus-30 dataset. Overall, the FABDEM provides a clear improvement over existing deforested DEM products in complex mountain topography such as the MERIT DEM. This study supports the use of FABDEM in forested mountain catchments as the current best-in-class data product.
Overview
CoChat Summary
TL;DR
This study validates FABDEM against UAV-lidar in a steep, forested mountain catchment in the Canadian Rockies, comparing it with Copernicus-30, MERIT, and SRTM. FABDEM had the best elevation accuracy, with lower RMSE and bias than Copernicus-30, though Copernicus-30 slightly outperformed it for slope and TPI.
Key findings
- FABDEM elevation RMSE was 1.953 m with mean bias 0.685 m, versus Copernicus-30 RMSE 2.582 m and bias −1.933 m; the paper reports a 24% reduction in elevation RMSE and a 135% reduction in bias compared to Copernicus-30. MERIT had RMSE 5.095 m and bias −1.137 m; SRTM had RMSE 3.556 m and bias −0.326 m.
- For slope, FABDEM had RMSE 1.317° and bias 0.224°, while Copernicus-30 had RMSE 1.122° and bias 0.121°; MERIT had RMSE 3.179° and bias 0.603°, and SRTM had RMSE 3.685° and bias 0.755°. For TPI, FABDEM had RMSE 0.480 and bias −0.002, Copernicus-30 had RMSE 0.366 and bias −0.001, MERIT had RMSE 0.869 and bias −0.005, and SRTM had RMSE 1.088 and bias 0.004.
- FABDEM best preserved the elevation distribution and matched the lidar slope distribution most closely; Copernicus-30 almost exactly matched lidar TPI, whereas FABDEM slightly overestimated small, slightly negative TPI values. SRTM showed substantial North–South striping, and MERIT had large artifacts co-located with gullies and steep slopes.
- FABDEM only applies bias corrections for canopies exceeding 3 m; the study found overestimation where vegetation removal was not run and a slight negative bias in tall-canopy areas.
Methods
- Reference data were UAV-lidar from the Fortress Mountain Research Basin, Kananaskis River Valley, Alberta, Canada, acquired in September 2018 with a Riegl miniVUX1-UAV lidar on a DJI M600 Pro, yielding >100 pts m⁻² and a 0.1 m DEM; vertical differences against 119 GNSS surface elevations had RMSE 0.11 m for open, 0.13 m for shrub, and 0.14 m for forested surfaces.
- FABDEM v1.0 was compared with Copernicus-30, MERIT, and SRTM; datasets were regridded to a common alignment and 30 m resolution using bilinear interpolation, clipped to the lidar domain, and projected to UTM zone 11N. Slope and Terrain Position Index (TPI) were computed with GDAL tools.
- Comparisons used difference, root mean squared error, and mean bias for elevation, slope, and TPI, along with spatial patterns and distributions.
Limitations
- The paper states that basin elevations >2500 m.a.s.l. were not surveyed due to visual line-of-sight limitations and logistical challenges; future comparisons should be conducted over broader extents as more UAV-lidar data become available; uncertainties of machine learning approaches in complex mountain topography remain an open question; smoothing may be problematic in low-slope areas; and FABDEM only corrects canopies exceeding 3 m.
- Evident from the text: the validation is limited to a single small catchment/domain, so generalizability beyond this representative Canadian Rockies basin is not established, and the UAV-lidar reference itself carries small vertical uncertainty (RMSE 0.11–0.14 m).
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Figures






















Verification
Claims the paper makes
0 Valid · 1 Not valid · 21 Not checked · 66 Own results and interpretations
A result the paper states — it cites no source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“The areas of largest error in the COP30 dataset almost exactly match the spatial extents of the tallest canopies in this domain.”
§ Validation of FABDEM, a global bare-earth elevation model, against UAV-lidar derived elevation in a complex forested mountain catchment > 4. Discussion
plainstates an association- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
The paper states this without a source or data behind it here, so there is nothing to check it against. The quote shows it is in the paper.
In the paper
“This is further substantiated as the SRTM data does not have these artefacts.”
§ Validation of FABDEM, a global bare-earth elevation model, against UAV-lidar derived elevation in a complex forested mountain catchment > 4. Discussion
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: unclear — It is unclear why the paper says it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“In the areas of tall canopies, there was a slight negative bias in the FABDEM.”
§ Validation of FABDEM, a global bare-earth elevation model, against UAV-lidar derived elevation in a complex forested mountain catchment > 3.3.4. Consideration of 3 m threshold
plainstates an association- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“COP30 DSM almost exactly matched the lidar values, whereas FABDEM DEM slightly overestimated these small, slightly negative TPI valuesi.e., the small depressions in the slopes.”
§ Validation of FABDEM, a global bare-earth elevation model, against UAV-lidar derived elevation in a complex forested mountain catchment > 3.2.3. TPI
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“The COP30 had the smallest errors in TPI (RMSE = 0.366, bias = -0.001) with the main spatial pattern along the westward-facing slope.”
§ Validation of FABDEM, a global bare-earth elevation model, against UAV-lidar derived elevation in a complex forested mountain catchment > 3.1.3. TPI
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
33 more claims
Create a free account to see all 88 claims and to verify the 24 references still open.
- It may state two separate claims as one. 32
- The quote only partly states this claim. 1
- Probably not a substantial claim. 20
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Moreover, numerous recent studies have also found FABDEM to be the most accurate global terrain data set at the time of writing (Bielski et al., 2024;Marsh et al., 2023;Meadows et al., 2024).”
From Global River Topology (GRIT): A Bifurcating River Hydrography (2025) · cites this paper as Marsh et al., 2023
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Each contradiction between two passages listed here was confirmed by an independent check.
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ Validation of FABDEM, a global bare-earth elevation model, against UAV-lidar derived elevation in a complex forested mountain catchment > 4. Discussion
“RMSE differences of 0.2° and 0.1° respectively”
§ Validation of FABDEM, a global bare-earth elevation model, against UAV-lidar derived elevation in a complex forested mountain catchment > 5. Conclusions
“| DataSet | DEM | RMSE (-) | Mean Bias (-) | | --- | --- | --- | --- |”
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ Validation of FABDEM, a global bare-earth elevation model, against UAV-lidar derived elevation in a complex forested mountain catchment > Data availability
“No new data were created or analysed in this study.”
§ Validation of FABDEM, a global bare-earth elevation model, against UAV-lidar derived elevation in a complex forested mountain catchment > 3.1.1. Elevation
“The aligned datasets were compared spatially to the lidar data.”
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ Validation of FABDEM, a global bare-earth elevation model, against UAV-lidar derived elevation in a complex forested mountain catchment > 2.1.1. UAV-Lidar
“A 0.1 m resolution DEM (figure 1, bottom left) and canopy height model (CHM) were generated”
§ Validation of FABDEM, a global bare-earth elevation model, against UAV-lidar derived elevation in a complex forested mountain catchment > 5. Conclusions
“0.1 m resolution DEM (bottom right) from LASTools.”
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ Validation of FABDEM, a global bare-earth elevation model, against UAV-lidar derived elevation in a complex forested mountain catchment > 3.3. Distribution of differences 3.3.1. Elevation
“The MERIT DEM had a notable underestimation bias, whereas the FABDEM DEM had an overestimation bias.”
§ Validation of FABDEM, a global bare-earth elevation model, against UAV-lidar derived elevation in a complex forested mountain catchment > 5. Conclusions
“Table: 1 Table 1 . Elevation RMSE and mean bias error metrics for the datasets versus the lidar.Negative values are associated with the global dataset's overall overestimation relative to the lidar's elevation. | DataSet | DEM | RMSE (m) | Mean Bias (m) | | --- | --- | --- | --- | | Elevation | COP30 | 2.582 | -1.933 | | | FABDEM | 1.953 | 0.685 | | | MERIT | 5.095 | -1.137 |”
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ Validation of FABDEM, a global bare-earth elevation model, against UAV-lidar derived elevation in a complex forested mountain catchment > 4. Discussion
“When compared to the lidar DEM, the FABDEM had the smallest elevation RMSE and mean bias, representing a substantial improvement over existing datasets such as MERIT.”
§ Validation of FABDEM, a global bare-earth elevation model, against UAV-lidar derived elevation in a complex forested mountain catchment > 5. Conclusions
“| | FABDEM | 1.953 | 0.685 | | | MERIT | 5.095 | -1.137 | | | SRTM | 3.556 | -0.326 |”
Citations
Cites
High-Resolution Global Maps of 21st-Century Forest Cover Change
Hansen, M. C., Potapov, P. V., Moore, R., Hancher, M., Turubanova, S. A., Tyukavina, A., Thau, D., Stehman, S. V., Goetz, S. J., Loveland, T. R., et al. (2013) · Science · doi:10.1126/science.1244693 · Cited by 11,704
The Shuttle Radar Topography Mission
Farr, T. G., Rosen, P. A., Caro, E., Crippen, R., Duren, R., Hensley, S., Kobrick, M., Paller, M., Rodriguez, E., Roth, L., et al. (2007) · Reviews of Geophysics · doi:10.1029/2005rg000183 · Cited by 8,927
The extraction of drainage networks from digital elevation data
O'Callaghan, J. F., & Mark, D. M. (1984) · Computer Vision, Graphics, and Image Processing · doi:10.1016/s0734-189x(84)80011-0 · Cited by 2,752
The development and evaluation of the Earth Gravitational Model 2008 (EGM2008)
Pavlis, N. K., Holmes, S. A., Kenyon, S. C., & Factor, J. K. (2012) · Journal of Geophysical Research: Solid Earth · doi:10.1029/2011jb008916 · Cited by 2,641
Mapping global forest canopy height through integration of GEDI and Landsat data
Potapov, P., Li, X., Hernandez-Serna, A., Tyukavina, A., Hansen, M. C., Kommareddy, A., Pickens, A., Turubanova, S., Tang, H., Silva, C. E., et al. (2021) · Remote Sensing of Environment · doi:10.1016/j.rse.2020.112165 · Cited by 1,383
A High-Accuracy Map of Global Terrain Elevations
Yamazaki, D., Ikeshima, D., Tawatari, R., Yamaguchi, T., O'Loughlin, F., Neal, J. C., Sampson, C. C., Kanae, S., & Bates, P. D. (2017) · Geophysical Research Letters · doi:10.1002/2017gl072874 · Cited by 1,326
Mapping forest canopy height globally with spaceborne lidar
Simard, M., Pinto, N., Fisher, J. B., & Baccini, A. (2011) · Journal of Geophysical Research · doi:10.1029/2011jg001708 · Cited by 1,292
DEM Generation from Laser Scanner Data Using Adaptive TIN Models
Axelsson, P. (2000) · ISPRS - International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences · Cited by 1,233
Dubayah, R., Blair, J. B., Goetz, S., Fatoyinbo, L., Hansen, M., Healey, S., Hofton, M., Hurtt, G., Kellner, J., Luthcke, S., et al. (2020) · Science of Remote Sensing · doi:10.1016/j.srs.2020.100002 · Cited by 1,042
A 30 m global map of elevation with forests and buildings removed
Hawker, L., Uhe, P., Paulo, L., Sosa, J., Savage, J., Sampson, C., & Neal, J. (2022) · Environmental Research Letters · doi:10.1088/1748-9326/ac4d4f · Cited by 907
Cited by
Meadows, M., Jones, S., & Reinke, K. (2024) · International Journal of Digital Earth · doi:10.1080/17538947.2024.2308734 · Cited by 157
A 30 m Global Flood Inundation Model for Any Climate Scenario
Wing, O. E. J., Bates, P., Quinn, N., Savage, J. T. S., Uhe, P. F., Cooper, A., Collings, T. P., Addor, N., Lord, N. S., Hatchard, S., et al. (2024) · Water Resources Research · doi:10.1029/2023wr036460 · Cited by 114
FathomDEM: an improved global terrain map using a hybrid vision transformer model
Uhe, P., Lucas, C., Hawker, L., Brine, M., Wilkinson, H., Cooper, A., Saoulis, A. A., Savage, J. T. S., & Sampson, C. (2025) · Environmental Research Letters · doi:10.1088/1748-9326/ada972 · Cited by 73
A global atlas of pumped hydro systems that repurpose existing mining sites
Weber, T., Stocks, R., Blakers, A. W., Nadolny, A., & Cheng, C. (2024) · Renewable Energy · doi:10.1016/j.renene.2024.120113 · Cited by 48
Shojaeezadeh, S. A., Elnashar, A., & Weber, T. K. D. (2025) · Science of Remote Sensing · doi:10.1016/j.srs.2025.100227 · Cited by 31
Metadata
- Authors
- Marsh, C. B., Harder, P., & Pomeroy, J. W.
- Affiliations
- University of Saskatchewan (CA)
- Corresponding author
- Marsh, Christopher B
- Venue
- Environmental Research Communications
- Publisher
- IOP Publishing
- Published
- 2023-03-01
- Volume
- 5
- Issue
- 3
- Pages
- 031009
- ISSN
- 2515-7620 (ISSN-L)
- OpenAlex
- W4327716813
- Cited by
- 80
- References
- 52
- Citations by year
- 2026: 31 · 2025: 30 · 2024: 16 · 2023: 3
- FWCI
- 5.53
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- cc-by
- creativecommons.org/licenses/by/4.0/ (vor, 28 d)
- iopscience.iop.org/info/page/text-and-data-mining (tdm, 28 d)
- Locations
- Environmental Research Communications (publishedVersion, cc-by)
- HARVEST (University of Saskatchewan) (submittedVersion, cc-by)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- Global Water Futures Programme
- Western Economic Diversification Canada
- Natural Sciences and Engineering Research Council of Canada
- Topics
- Physical Sciences › Computer Science › Computer Vision and Pattern Recognition › Satellite Image Processing and Photogrammetry
- Life Sciences › Agricultural and Biological Sciences › Forestry › Remote Sensing and LiDAR Applications
- Physical Sciences › Earth and Planetary Sciences › Geology › 3D Surveying and Cultural Heritage
- Keywords
- FABDEM, bare-earth digital elevation model, vegetation removal, UAV LiDAR, Copernicus DEM, DEM validation, slope, elevation bias, SRTM, MERIT DEM, canopy removal
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
A language model drew the claims from the paper on 2026-11-19, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-11-19 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Validation of FABDEM, a global bare-earth elevation model, against UAV-lidar derived elevation in a complex forested mountain catchment. https://app.cochat.ai/papers/10.1088/2515-7620/acc56d
- The paper
- Marsh, C. B., Harder, P., & Pomeroy, J. W. (2023). Validation of FABDEM, a global bare-earth elevation model, against UAV-lidar derived elevation in a complex forested mountain catchment. Environmental Research Communications. https://doi.org/10.1088/2515-7620/acc56d
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.