The DOI matches its Crossref record; 42 of the 42 references it cites were found in a registry or an index.
Three-Dimensional BioAssembly Tool for Generating Viable Tissue-Engineered Constructs
Abstract
The primary emphasis of tissue engineering is the design and fabrication of constructs for the replacement of nonfunctional tissue. Because tissue represents a highly organized interplay of cells and extracellular matrix, the fabrication of replacement tissue should mimic this spatial organization. This report details studies evaluating the use of a three-dimensional, direct-write cell deposition system to construct spatially organized viable structures. A direct-write bioassembly system was designed and fabricated to permit layer-by-layer placement of cells and extracellular matrix on a variety of material substrates. Human fibroblasts suspended in polyoxyethylene/polyoxypropylene were coextruded through a positive displacement pen delivery onto a polystyrene slide. After deposition, approximately 60% of the fibroblasts remained viable. Bovine aortic endothelial cells (BAECs) suspended in soluble collagen type I were coextruded via microdispense pen delivery onto the hydrophilic side of flat sheets of polyethylene terephthalate. After deposition with a 25-gauge tip, approximately 86% of the BAECs were viable. When maintained in culture for up to 35 days, the constructs remained viable and maintained their original spatial organization. These results indicate the potential for utilizing a direct-write, three-dimensional bioassembly tool to create viable, patterned tissue-engineered constructs.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Geometric Control of Cell Life and Death
Chen, C. S., Mrksich, M., Huang, S., Whitesides, G. M., & Ingber, D. E. (1997) · Science · doi:10.1126/science.276.5317.1425 · Cited by 4,657
Fused deposition modeling of novel scaffold architectures for tissue engineering applications
Zein, I., Hutmacher, D. W., Tan, K. C., & Teoh, S. H. (2002) · Biomaterials · doi:10.1016/s0142-9612(01)00232-0 · Cited by 1,874
Morphogenetic roles of classic cadherins
Takeichi, M. (1995) · Current Opinion in Cell Biology · doi:10.1016/0955-0674(95)80102-2 · Cited by 1,450
Organ printing: computer-aided jet-based 3D tissue engineering
Mironov, V., Boland, T., Trusk, T., Forgacs, G., & Markwald, R. R. (2003) · Trends in Biotechnology · doi:10.1016/s0167-7799(03)00033-7 · Cited by 1,276
Mrksich, M., & Whitesides, G. M. (1996) · Annual Review of Biophysics and Biomolecular Structure · doi:10.1146/annurev.bb.25.060196.000415 · Cited by 850
CELL ADHESION MOLECULES: Implications for a Molecular Histology
Edelman, G. M., & Crossin, K. L. (1991) · Annual Review of Biochemistry · doi:10.1146/annurev.bi.60.070191.001103 · Cited by 705
Creation of long-lasting blood vessels
Koike, N., Fukumura, D., Gralla, O., Au, P., Schechner, J. S., & Jain, R. K. (2004) · Nature · doi:10.1038/428138a · Cited by 701
Vasculogenesis and angiogenesis in embryonic-stem-cell-derived embryoid bodies
Risau, W., Sariola, H., Zerwes, H.-G., Sasse, J., Ekblom, P., Kemler, R., & Doetschman, T. (1988) · Development · doi:10.1242/dev.102.3.471 · Cited by 657
Montesano, R., Orci, L., & Vassalli, P. (1983) · The Journal of cell biology · doi:10.1083/jcb.97.5.1648 · Cited by 647
Capillary endothelial cell cultures: phenotypic modulation by matrix components.
Madri, J. A., & Williams, S. K. (1983) · The Journal of cell biology · doi:10.1083/jcb.97.1.153 · Cited by 612
Self-citationA three-dimensional osteochondral composite scaffold for articular cartilage repair
Sherwood, J. K., Riley, S. L., Palazzolo, R., Brown, S. C., Monkhouse, D. C., Coates, M., Griffith, L. G., Landeen, L. K., & Ratcliffe, A. (2002) · Biomaterials · doi:10.1016/s0142-9612(02)00223-5 · Cited by 610
Functional Living Trileaflet Heart Valves Grown In Vitro
Hoerstrup, S. P., Sodian, R., Daebritz, S., Wang, J., Bacha, E. A., Martin, D. P., Moran, A. M., Guleserian, K. J., Sperling, J. S., Kaushal, S., et al. (2000) · Circulation · doi:10.1161/01.cir.102.suppl_3.iii-44 · Cited by 595
Use of stereolithography to manufacture critical‐sized 3D biodegradable scaffolds for bone ingrowth
Cooke, M. N., Fisher, J. P., Dean, D., Rimnac, C., & Mikos, A. G. (2003) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.10485 · Cited by 571
Cell and organ printing 1: Protein and cell printers
Wilson, W. C., & Boland, T. (2003) · The Anatomical Record Part A: Discoveries in Molecular, Cellular, and Evolutionary Biology · doi:10.1002/ar.a.10057 · Cited by 531
Ben-Ze'ev, A., Robinson, G. S., Bucher, N. L., & Farmer, S. R. (1988) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.85.7.2161 · Cited by 529
Relationship between vasculogenesis, angiogenesis and haemopoiesis during avian ontogeny
Pardanaud, L., Yassine, F., & Dieterlen-Lievre, F. (1989) · Development · doi:10.1242/dev.105.3.473 · Cited by 464
Geiger, B., & Ayalon, O. (1992) · Annual Review of Cell Biology · doi:10.1146/annurev.cb.08.110192.001515 · Cited by 442
Cell and organ printing 2: Fusion of cell aggregates in three‐dimensional gels
Boland, T., Mironov, V., Gutowska, A., Roth, E. A., & Markwald, R. R. (2003) · The Anatomical Record Part A: Discoveries in Molecular, Cellular, and Evolutionary Biology · doi:10.1002/ar.a.10059 · Cited by 382
A role for cadherins in tissue formation
Larue, L., Antos, C., Butz, S., Huber, O., Delmas, V., Dominis, M., & Kemler, R. (1996) · Development · doi:10.1242/dev.122.10.3185 · Cited by 355
Oral dosage forms fabricated by Three Dimensional Printing™
Katstra, W. E., Palazzolo, R. D., Rowe, C. W., Giritlioglu, B., Teung, P., & Cima, M. J. (2000) · Journal of Controlled Release · doi:10.1016/s0168-3659(99)00225-4 · Cited by 334
Rheological evaluation of poloxamer as an in situ gel for ophthalmic use
Edsman, K., Carlfors, J., & Petersson, R. (1998) · European Journal of Pharmaceutical Sciences · doi:10.1016/s0928-0987(97)00075-4 · Cited by 331
Early In Vivo Experience With Tissue-Engineered Trileaflet Heart Valves
Sodian, R., Hoerstrup, S. P., Sperling, J. S., Daebritz, S., Martin, D. P., Moran, A. M., Kim, B. S., Schoen, F. J., Vacanti, J. P., & Mayer, J. E. (2000) · Circulation · doi:10.1161/01.cir.102.suppl_3.iii-22 · Cited by 330
Park, A., Wu, B., & Griffith, L. G. (1998) · Journal of Biomaterials Science, Polymer Edition · doi:10.1163/156856298x00451 · Cited by 322
Multimechanism oral dosage forms fabricated by three dimensional printing™
Rowe, C. W., Katstra, W. E., Palazzolo, R. D., Giritlioglu, B., Teung, P., & Cima, M. J. (2000) · Journal of Controlled Release · doi:10.1016/s0168-3659(99)00224-2 · Cited by 255
Absorption of insulin from Pluronic F-127 gels following subcutaneous administration in rats
Barichello, J. M., Morishita, M., Takayama, K., & Nagai, T. (1999) · International Journal of Pharmaceutics · doi:10.1016/s0378-5173(99)00119-2 · Cited by 235
Spatially controlled cell engineering on biodegradable polymer surfaces
Patel, N., Padera, R., Sanders, G. H. W., Cannizzaro, S. M., Davies, M. C., Langer, R., Roberts, C. J., Tendler, S. J. B., Williams, P. M., & Shakesheff, K. M. (1998) · The FASEB Journal · doi:10.1096/fasebj.12.14.1447 · Cited by 233
Tissue engineering of heart valves: in vitro experiences
Sodian, R., Hoerstrup, S. P., Sperling, J. S., Daebritz, S. H., Martin, D. P., Schoen, F. J., Vacanti, J. P., & Mayer, J. E. (2000) · The Annals of Thoracic Surgery · doi:10.1016/s0003-4975(00)01255-8 · Cited by 213
Application of Stereolithography for Scaffold Fabrication for Tissue Engineered Heart Valves
Sodian, R., Loebe, M., Hein, A., Martin, D. P., Hoerstrup, S. P., Potapov, E. V., Hausmann, H., Lueth, T., & Hetzer, R. (2002) · ASAIO Journal · doi:10.1097/00002480-200201000-00004 · Cited by 206
In vitro generation of differentiated cardiac myofibers on micropatterned laminin surfaces
McDevitt, T. C., Angello, J. C., Whitney, M. L., Reinecke, H., Hauschka, S. D., Murry, C. E., & Stayton, P. S. (2002) · Journal of Biomedical Materials Research · doi:10.1002/jbm.1292 · Cited by 197
Differential expression of extracellular proteins is correlated with angiogenesis in vitro.
Ml, I.-A., Hasselaar, P., & Sage, H. (1991) · PubMed · Cited by 193
Desai, S. D., & Blanchard, J. (1998) · Journal of Pharmaceutical Sciences · doi:10.1021/js970090e · Cited by 177
Curodeau, A., Sachs, E., & Caldarise, S. (2000) · Journal of Biomedical Materials Research · doi:10.1002/1097-4636(200009)53:5<525::aid-jbm12>3.0.co;2-1 · Cited by 173
Johnston, T. P., Punjabi, M. A., & Froelich, C. J. (1992) · Pharmaceutical Research · doi:10.1023/a:1015815624334 · Cited by 167
Rapid Perfusion and Network Remodeling in a Microvascular Construct After Implantation
Shepherd, B. R., Chen, H. Y. S., Smith, C. M., Gruionu, G., Williams, S. K., & Hoying, J. B. (2004) · Arteriosclerosis, Thrombosis, and Vascular Biology · doi:10.1161/01.atv.0000124103.86943.1e · Cited by 159
Self-citationGeneration of mesoscopic patterns of viable Escherichia coli by ambient laser transfer
Ringeisen, B. R., Chrisey, D. B., Piqué, A., Young, D., Modi, R., Bucaro, M. A., Jones‐Meehan, J., & Spargo, B. J. (2002) · Biomaterials · doi:10.1016/s0142-9612(01)00091-6 · Cited by 156
Facial reconstruction using 3-D computer graphics
Vanezis, P., Vanezis, M., McCombe, G., & Niblett, T. (2000) · Forensic Science International · doi:10.1016/s0379-0738(99)00026-2 · Cited by 151
Patterning Axonal Guidance Molecules Using a Novel Strategy for Microcontact Printing
Oliva, A. A., James, C. D., Kingman, C. E., Craighead, H. G., & Banker, G. A. (2003) · Neurochemical Research · doi:10.1023/a:1026052820129 · Cited by 144
Biological Activity of Urease Formulated in Poloxamer 407 after Intraperitoneal Injection in the Rat
Pec, E. A., Wout, Z. G., & Johnston, T. P. (1992) · Journal of Pharmaceutical Sciences · doi:10.1002/jps.2600810707 · Cited by 133
Shibuya, Y., Mizoguchi, A., Takeichi, M., Shimada, K., & Idé, C. (1995) · Neuroscience · doi:10.1016/0306-4522(95)00015-b · Cited by 96
Aerosol delivery of mammalian cells for tissue engineering
Roberts, A., Wyslouzil, B. E., & Bonassar, L. J. (2005) · Biotechnology and Bioengineering · doi:10.1002/bit.20549 · Cited by 41
Graphical and stereolithographic models of the developing human heart lumen
Pentecost, J. O., Sahn, D. J., Thornburg, B. L., Gharib, M., Baptista, A., & Thornburg, K. L. R. (2001) · Computerized Medical Imaging and Graphics · doi:10.1016/s0895-6111(01)00020-9 · Cited by 15
Stereolithographic models of biopolymers
Yourtee, D. M., Emery, J. D., Smith, R. E., et al. (2000) · Journal of Molecular Graphics and Modelling · doi:10.1016/s1093-3263(00)00029-2 · Cited by 11
Cited by
3D bioprinting of tissues and organs
Murphy, S. V., & Atala, A. (2014) · Nature Biotechnology · doi:10.1038/nbt.2958 · Cited by 7,034
25th Anniversary Article: Engineering Hydrogels for Biofabrication
Malda, J., Visser, J., Melchels, F. P., Jüngst, T., Hennink, W. E., Dhert, W. J. A., Groll, J., & Hutmacher, D. W. (2013) · Advanced Materials · doi:10.1002/adma.201302042 · Cited by 1,901
Current advances and future perspectives in extrusion-based bioprinting
Ozbolat, I. T., & Hospodiuk, M. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2015.10.076 · Cited by 1,572
A review of trends and limitations in hydrogel-rapid prototyping for tissue engineering
Billiet, T., Vandenhaute, M., Schelfhout, J., Van Vlierberghe, S., & Dubruel, P. (2012) · Biomaterials · doi:10.1016/j.biomaterials.2012.04.050 · Cited by 1,284
Additive manufacturing of tissues and organs
Melchels, F. P. W., Domingos, M. A. N., Klein, T. J., Malda, J., Bartolo, P. J., & Hutmacher, D. W. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2011.11.007 · Cited by 1,213
Metadata
- Authors
- Smith, C. M., Stone, A. L., Parkhill, R. L., Stewart, R. L., Simpkins, M. W., Kachurin, A. M., Warren, W. L., & Williams, S. K.
- Venue
- Tissue Engineering
- Publisher
- SAGE Publications
- Published
- 2004-09-01
- Volume
- 10
- Issue
- 9
- Pages
- 1566-1576
- ISSN
- 1076-3279 (ISSN-L)
- OpenAlex
- W2045047041
- Cited by
- 373
- References
- 42
- FWCI
- 5.80
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.