In Vivo Bone Tissue Engineering Using Mesenchymal Stem Cells on a Novel Electrospun Nanofibrous Scaffold
The DOI matches its Crossref record; 25 of the 25 references it cites were found in a registry or an index.
Abstract
The objective of this study was to assess bone formation from mesenchymal stem cells (MSCs) on a novel nanofibrous scaffold in a rat model. A highly porous, degradable poly(epsilon-caprolactone) (PCL) scaffold with an extracellular matrix-like topography was produced by electrostatic fiber spinning. MSCs derived from the bone marrow of neonatal rats were cultured, expanded, and seeded on the scaffolds. The cell-polymer constructs were cultured with osteogenic supplements in a rotating bioreactor for 4 weeks, and subsequently implanted in the omenta of rats for 4 weeks. The constructs were explanted and characterized by histology, immunohistochemistry, and scanning electron microscopy. The constructs maintained the size and shape of the original scaffolds. Morphologically, the constructs were rigid and had a bone-like appearance. Cells and extracellular matrix (ECM) formation were observed throughout the constructs. In addition, mineralization and type I collagen were also detected. This study establishes the ability to develop bone grafts on electrospun nanofibrous scaffolds in a well-vascularized site using MSCs.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Multilineage potential of adult human mesenchymal stem cells
Pittenger, M. F., Mackay, A. M., Beck, S. C., Jaiswal, R. K., Douglas, R., Mosca, J. D., Moorman, M. A., Simonetti, D. W., Craig, S., & Marshak, D. R. (1999) · Science · doi:10.1126/science.284.5411.143 · Cited by 21,052
Langer, R., & Vacanti, J. P. (1993) · Science · doi:10.1126/science.8493529 · Cited by 9,893
Self-citationCaplan, A. I. (1991) · Journal of Orthopaedic Research · doi:10.1002/jor.1100090504 · Cited by 6,548
Nanometre diameter fibres of polymer, produced by electrospinning
Reneker, D. H., & Chun, I. (1996) · Nanotechnology · doi:10.1088/0957-4484/7/3/009 · Cited by 3,520
Electrospinning process and applications of electrospun fibers
Doshi, J., & Reneker, D. H. (1995) · Journal of Electrostatics · doi:10.1016/0304-3886(95)00041-8 · Cited by 3,209
Electrospun nanofibrous structure: A novel scaffold for tissue engineering
Li, W., Laurencin, C. T., Caterson, E. J., Tuan, R. S., & Ko, F. K. (2002) · Journal of Biomedical Materials Research · doi:10.1002/jbm.10167 · Cited by 2,427
Electrospinning of Collagen Nanofibers
Matthews, J. A., Wnek, G. E., Simpson, D. G., & Bowlin, G. L. (2002) · Biomacromolecules · doi:10.1021/bm015533u · Cited by 2,251
Repair of Large Bone Defects with the Use of Autologous Bone Marrow Stromal Cells
Quarto, R., Mastrogiacomo, M., Cancedda, R., Kutepov, S. M., Mukhachev, V., Lavroukov, A., Kon, E., & Marcacci, M. (2001) · New England Journal of Medicine · doi:10.1056/nejm200102013440516 · Cited by 1,383
Kenawy, E.-R., Bowlin, G. L., Mansfield, K., Layman, J., Simpson, D. G., Sanders, E. H., & Wnek, G. E. (2002) · Journal of Controlled Release · doi:10.1016/s0168-3659(02)00041-x · Cited by 1,311
Experimental characterization of electrospinning: the electrically forced jet and instabilities
Shin, Y. M., Hohman, M. M., Brenner, M. P., & Rutledge, G. C. (2001) · Polymer · doi:10.1016/s0032-3861(01)00540-7 · Cited by 1,070
Bone graft and bone graft substitutes: A review of current technology and applications
Damien, C. J., & Parsons, J. R. (1991) · Journal of Applied Biomaterials · doi:10.1002/jab.770020307 · Cited by 1,058
Bone formation by three-dimensional stromal osteoblast culture in biodegradable polymer scaffolds
Ishaug, S. L., Crane, G. M., Miller, M. J., Yasko, A. W., Yaszemski, M. J., & Mikos, A. G. (1997) · Journal of Biomedical Materials Research · doi:10.1002/(sici)1097-4636(199707)36:1<17::aid-jbm3>3.0.co;2-o · Cited by 833
Open pore biodegradable matrices formed with gas foaming
Harris, L. D., Kim, B.-S., & Mooney, D. J. (1998) · Journal of Biomedical Materials Research · doi:10.1002/(sici)1097-4636(19981205)42:3<396::aid-jbm7>3.0.co;2-e · Cited by 824
Electrostatic spinning of acrylic microfibers
Baumgarten, P. K. (1971) · Journal of Colloid and Interface Science · doi:10.1016/0021-9797(71)90241-4 · Cited by 816
Synthetic Polymers Seeded with Chondrocytes Provide a Template for New Cartilage Formation
Vacanti, C. A., Langer, R., Schloo, B., & Vacanti, J. P. (1991) · Plastic and Reconstructive Surgery · doi:10.1097/00006534-199111000-00001 · Cited by 547
Self-citationEngineered collagen–PEO nanofibers and fabrics
Huang, L., Nagapudi, K., P.Apkarian, R., & Chaikof, E. L. (2001) · Journal of Biomaterials Science, Polymer Edition · doi:10.1163/156856201753252516 · Cited by 501
Mechanical properties of composites using ultrafine electrospun fibers
Kim, J., & Reneker, D. H. (1999) · Polymer Composites · doi:10.1002/pc.10340 · Cited by 434
Engineering Bone Regeneration with Bioabsorbable Scaffolds with Novel Microarchitecture
Whang, K., Healy, K. E., Elenz, D. R., Nam, E. K., Tsai, D. C., Thomas, C. H., Nuber, G. W., Glorieux, F. H., Travers, R., & Sprague, S. M. (1999) · Tissue Engineering · doi:10.1089/ten.1999.5.35 · Cited by 405
Engineered Bone Development from a Pre-Osteoblast Cell Line on Three-Dimensional Scaffolds
Shea, L. D., Wang, D., Franceschi, R. T., & Mooney, D. J. (2000) · Tissue Engineering · doi:10.1089/10763270050199550 · Cited by 229
Electrospinning of ultra‐thin polymer fibers
Jaeger, R., Bergshoef, M. M., Batlle, C. M. I., Schönherr, H., & Julius Vancso, G. (1998) · Macromolecular Symposia · doi:10.1002/masy.19981270119 · Cited by 193
Poly(L-lactic acid) foams with cell seeding and controlled-release capacity
Lo, H., Kadiyala, S., Guggino, S. E., & Leong, K. W. (1996) · Journal of Biomedical Materials Research · doi:10.1002/(sici)1097-4636(199604)30:4<475::aid-jbm5>3.0.co;2-m · Cited by 177
Goldstein, A. S., Zhu, G. G., Morris, G. E., Meszlenyi, R. K., & Mikos, A. G. (1999) · Tissue Engineering · doi:10.1089/ten.1999.5.421 · Cited by 154
Saad, B., Matter, S., Ciardelli, G., Neuenschwander, P., Suter, U. W., Uhlschmid, G. K., & Welti, M. (1996) · Journal of Biomedical Materials Research · doi:10.1002/(sici)1097-4636(199611)32:3<355::aid-jbm8>3.0.co;2-r · Cited by 105
Open pore biodegradable matrices formed with gas foaming
Harris, L. D., Kim, B., & Mooney, D. J. (1998) · Journal of Biomedical Materials Research · doi:10.1002/(sici)1097-4636(19981205)42:3<396::aid-jbm7>3.3.co;2-p · Cited by 71
In vitro engineering of bone using a rotational oxygen-permeable bioreactor system
Terai, H., Hannouche, D., Ochoa, E. R., Yamano, Y., & Vacanti, J. P. (2002) · Materials Science and Engineering C · doi:10.1016/s0928-4931(02)00006-1 · Cited by 63
Self-citation
Cited by
Electrospinning: A fascinating fiber fabrication technique
Bhardwaj, N., & Kundu, S. C. (2010) · Biotechnology Advances · doi:10.1016/j.biotechadv.2010.01.004 · Cited by 5,028
Biodegradable polymers as biomaterials
Nair, L. S., & Laurencin, C. T. (2007) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2007.05.017 · Cited by 4,416
Electrospinning of Polymeric Nanofibers for Tissue Engineering Applications: A Review
Pham, Q. P., Sharma, U., & Mikos, A. G. (2006) · Tissue Engineering · doi:10.1089/ten.2006.12.1197 · Cited by 2,256
Bioactive glass in tissue engineering
Rahaman, M. N., Day, D. E., Sonny Bal, B., Fu, Q., Jung, S. B., Bonewald, L. F., & Tomsia, A. P. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2011.03.016 · Cited by 1,794
Biomaterials for bone tissue engineering
Stevens, M. M. (2008) · Materials Today · doi:10.1016/s1369-7021(08)70086-5 · Cited by 1,202
Metadata
- Authors
- Shin, M., Yoshimoto, H., & Vacanti, J. P.
- Venue
- Tissue Engineering
- Publisher
- SAGE Publications
- Published
- 2004-01
- Volume
- 10
- Issue
- 1-2
- Pages
- 33-41
- ISSN
- 1076-3279 (ISSN-L)
- 1557-8690
- OpenAlex
- W1985395264
- Cited by
- 434
- References
- 25
- FWCI
- 15.14
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.